Only show results available in Virginia? Ok

air pollution control system Applications

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Air pollution control for recycling systems

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Industrial air pollution control for the metals and mining

    Since mankind`s early beginnings, mining, metallurgy and the subsequent processing of natural resources have evolved into one of the most significant industries. Known as `heavy-industry`, this branch plays an important economic role in most countries. The scope of applications for CTP systems ranges from the mining of natural resources (e.g. bauxite and gold-ore mining), through the production of acetylene gas from coal and calcium carbonate, to the aluminium and steel industry and their foundries.

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction strategies to reduce system size, meaning a reduction in both capital and operating costs. This can be achieved by recirculating the air in drying ovens or by cascading areas of lower VOC concentration to areas of higher VOC concentration.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air Pollution Control for Microelectronics

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air Pollution Control for Metal Finishing

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Air pollution control for the energy recovery industry

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy conscious designs available today. We recommend analyzing these systems periodically to determine energy reduction opportunities. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the textiles industry

    Companies that use solvent based inks, dies, or coatings in the textile manufacturing process – commonly incorporate from filtration systems in the control plan.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Air pollution control solution for the particulate matter

    Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air Pollution Control Solution for the FGD - SO2

    Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Odor control for the tobacco industry

    Tobacco produces a strong, characteristic smell. The process airflow from the tobacco industry mainly comes from drying the tobacco leaves. Through central air exhaust systems, all air submitted from the drying process is blown outside. Because this is a very large waste airflow, odour nuisance in the neighbourhood is likely.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Premium

    Air Pollution Control Solution for the HCl, HF, and Halides

    The severity of these contaminants requires the most advanced removal and treatment technologies. Macrotek has extensive experience in designing systems that will meet and exceed customers` requirements and regulations. In addition, the corrosive nature of these gases requires specific consideration for material selection.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the forest products

    Wood is one of the world`s oldest and most important raw materials. Apart from applications in the furniture and building industry and related sectors, CTP systems are used for air purification in the production of  lumber products such as  plywood panels, fibre boards (particle boards, MDF, OSB) and compressed wooden parts.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you