air pollution control technology Applications

16 Results found
Only show results available in Virginia?
OK
  • Keyword: air pollution control technology ×

Odor Control

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

Air pollution control for ventilation air methane industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

Air pollution control solution for the NOx and CO2

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Specific industrial applications require wet end of pipe treatment for NOx or CO2. Macrotek offers absorbers utilizing various reagents for neutralization of NOx or CO2. NOx scrubbing is particularly suitable in situations where Nitric Acid can be utilized elsewhere in the plant, as it is a scrubbing product. As CO2 regulations become more stringent, methods for reducing emissions are continually being evaluated. Macrotek offers CO2 scrubbing technology which isolates CO2 in a contaminated stream to produce a pure CO2 product, making sequestration a more appealing option.

Air Pollution Control Solution for the HCl, HF, and Halides

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

The severity of these contaminants requires the most advanced removal and treatment technologies. Macrotek has extensive experience in designing systems that will meet and exceed customers` requirements and regulations. In addition, the corrosive nature of these gases requires specific consideration for material selection.

Air pollution control solution for the Ammonia and odour

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Control of emissions is often required due to the hazardous nature of the contaminant. Often, control or removal is necessary due to offensive odours. Ammonia, sulfur and other related compounds fall in these categories. Macrotek offers many control technologies to capture ammonia and other odour causing contaminants. Reagents are often used to neutralize and stabilize the by-product.

Air Pollution Control Solution for the Hydrogen Sulfide (H2S)

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Hydrogen Sulfide is lethal if released. Macrotek is a leader in developing advanced technologies for optimum removal and treatment. Our experience includes many installations using caustic, oxidizing reagents, catalytic and forced oxidation combination, and biofilters. Each application is unique and requires custom solutions.

Air pollution control solution for the particulate matter

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

Metallurgical

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

Air pollution control for the remediation industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Thermal and catalytic oxidizers are one of the primary vapor treatment technologies used in purifying harmful compounds from contaminated groundwater or soil.  Global Technologies is the remediation division of Anguil Environmental Systems focused on treating emissions that are extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

Air pollution control for the chemical processing industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

Air pollution control for the electronics and semiconductor industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

Air pollution control for the pharmaceutical industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

Bio-Contaminant Control

by AgriAir Equipment     based in Mukilteo, WASHINGTON (USA)

Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to protect potentially vulnerable patients from dangerous microbes. In this new era of exponentially expanding plant pathogens affecting indoor crops, Hydroperoxide generators built into the AgriAir system are the answer to concerns that the airborne environment stays as sterile as possible. IHP technology destroys microbes, pathogens, and virus by changing their molecular structure and rendering them harmless.

Industrial air pollution control for the building materials, cement and lime

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

One of the oldest industry sectors, the construction materials industry has developed a broad range of products that is constantly adapting to the state of technology and architecture: Concrete, thermal and moisture protection, masonry, plastics, composite materials and finishes, are all used in the erection of buildings and structures, and also as auxiliary materials on construction sites.

Applications and Air Pollutants Removed in the Biomass Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

Odor control for the fish feed production industry

by Aerox B.V.     based in Vleuten, NETHERLANDS

In the Fish feed process the product is usually conducted to the dryer through pneumatic transport, after which it falls out from the dryer into the cooler. Odour sources in this process are the flash- off of the extruder, transport air, dryer air and possibly also air from the cooler.

The amount of air per line that is emitted and should be deodorized depends amongst others of the type of dryers/coolers (vertical or horizontal), but also whether air is recycled from cooler to the dryer.

One compact Aerox-Injector can treat the total amount of air coming from a complete production line at all times. In many cases it is even possible to treat combined airflows of multiple production lines with one Aerox-Injector!

We are happy to advise you what (cost) technically will be the best solution. The Aerox-Injection technology prevents pollution of the Aerox-Injector by dust or greasy air in this process. This will guarantee the performance and will keep your neighbours really satisfied.

Need help finding the right suppliers?

Let the XPRTs do the work for you