air pollution equipment Applications

24 Results found
Only show results available in Virginia?
OK
  • Keyword: air pollution equipment ×

Air Quality Monitoring Equipment for Industry

by Signal Group Ltd     based in Camberley, UNITED KINGDOM

Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.

Iron and Steel

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

Cement

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

Metallurgical

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

Ethanol and Biofuels

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

Coating and Laminating

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

Air pollution control for the energy recovery industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy conscious designs available today. We recommend analyzing these systems periodically to determine energy reduction opportunities. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

Chemical and Pharmaceutical Solutions

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

The application of VOC emission control equipment for the chemical and pharmaceutical industries requires a thorough knowledge and understanding of the customer's process and requirements, and having the ability to offer custom solutions. MEGTEC has years of experience in finding solutions to support the chemical industries worldwide. with our range of solutions including scrubbers and wet electrostatic precipitators, carbon adsorption systems for solvent recovery, distillation and purification equipment, and thermal oxidation systems.

Air monitoring equipments for outdoor & indoor air quality

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

Gradko’s ambient air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range.

Air pollution control for the remediation industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Thermal and catalytic oxidizers are one of the primary vapor treatment technologies used in purifying harmful compounds from contaminated groundwater or soil.  Global Technologies is the remediation division of Anguil Environmental Systems focused on treating emissions that are extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

Applications and Air Pollutants Removed in the Energy (Power) Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing line emissions. Removal of fine metallic particulate including tars from smelters and sinter plants as well as particulate emissions from blast, reverberatory and other furnaces. 

Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

Air monitoring equipments for laboratory analysis

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

Our purpose built environmental laboratory provides accurate and efficient analysis, specialising in the determination of gaseous pollutant concentrations. Other processes can also be performed to meet the specific needs of our customers.

Air monitoring equipments for workplace and personal exposure monitoring

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

Many occupations involve the use of hazardous substances or processes, where pollutants may be ingested, inhaled or absorbed through the skin. General ambient pollutants can also have health implications in otherwise non-hazardous workplaces. Occupational exposure limits regulate many pollutants based on an eight-hour working day. Personal exposure assessments can be made over an eight-hour period (Time Weighted Average (TWA) exposure) using our simple to use monitoring equipment.

Pollutant monitoring for the manufacturing industries

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ormantine`s air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA`s many solutions have applications from personal exposure monitoring to long term fence line monitoring studies.

Shredders for Electric and Electronic Equipment (WEEE) and Refrigerators

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials they are made of, such as copper, iron, steel, aluminum, glass, silver, thus avoiding a waste of resources that can be reused to build new equipment in addition to the environmental sustainability.

Air Quality & Emission Management Issues

by PP `Tehnologia O`     based in Vinnytsia, UKRAINE

• Development of documents substantiating the volumes of emissions of pollutants into the air from stationary sources for enterprises, organizations and private entrepreneurs; • Inventory of air pollutants emissions from stationary sources; • Preparing, maintenance support of documentation for receiving a Permit for Emissions of Pollutants into the Air from Stationary Sources (PEPASS) *, issued by the Departments of Environment and Natural Resources of the regional state administrations of Ukraine; • Development and registration of dust and gas cleaning equipment passports; • Monitoring of the dust and gas cleaning equipment effectiveness; • Quality control of the implementation of projects of Maximum Permissible Emissions (MPE); • Calculation of fees for environmental pollution (environmental tax) on the basis of amount of emission of pollutants into the air.

Airport Environmental Monitoring

by Chelsea Technologies Group     based in West Molesey, UNITED KINGDOM

Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential.

Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. Installed at various locations around the airport, deployed with it’s own integrated anti-biofouling system, utilising the GSM network, the monitoring sites send data to a secure ftp site, where any internet enabled device can access the data. In this way the systems act as any early warning system allowing any hydrocarbon discharge to be detected in real-time.

Optional environmental monitoring features include remote control to allow the user to turn equipment on and off, change the sample rate and detection range. There is also a facility to allow SMS text and email alarm notifications triggered by user-defined set-points together with customised web pages, data displays and automated data downloads via an ftp server.

Airport runoff can contain high concentrations of various pollutants, in particular polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the environmental levels of which have to be monitored. An understanding of the magnitude of contamination due to airport runoff water is important for the effective management of airport infrastructure. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited to the airport environment.

Air sampling & monitoring systems for energy/utilities industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

Related Terms for air pollution equipment

Need help finding the right suppliers?

Let the XPRTs do the work for you