Only show results available in Virginia? Ok

air Pollution monitor Applications

  • Air Quality Monitoring Equipment for Industry

    Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • UFP Monitoring System for Children Exposure to Air Pollution in Rural Bhutan

    Traditionally exposure assessment studies in developing countries have been bases on fixed-site monitoring. This study followed school children in three sites and quatified daily personal exposure to UFP with real time monitoring NanoTracer devices. Diaries were kept to correlate exposure levels to activity and the relevant micro-environment. The highest UFP exposures resulted from cooking and eating (64% of daily exposure, due to cooking on traditional wood-fired mud cookstoves). The lowest UFP exposures were...

    By Oxility BV based in Best, NETHERLANDS.

  • Particulate monitoring for continuous emissions

    With the advent of specific process emission limits being defined, continuous particulate monitoring has become a regulatory requirement for many industries. smoke stack #1Particulate monitoring requires the measurement of the mass concentration of particulate matter in stack emissions to atmosphere. There is no known method of continuously measuring particulate concentration by direct measurement and therefore, all continuous particulate measurement methods are inferential. Each method involves the measurement...

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Continuous emissions monitoring for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Ambient air monitoring

    Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Road side air monitoring

    Motor vehicle emissions are a major source of air pollution in urban areas and impact the lives of billions of people every day around the world. Motor vehicle exhaust contains toxic chemicals that are harmful to people’s health when exposed at certain levels. These toxic fumes cause smog in the atmosphere, which can affect very broad regional air sheds and contribute to the formation of cancer. Teledyne API has several products specifically designed to meet the challenging demands of near-roadside air...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Air quality and industrial gas monitoring systems for CEMS - Stack air monitoring

    Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the world.

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • SO2 Monitoring in Air

    SO2 (sulfur dioxide) is measured in a number of applications. SO2 is used as a food grade preservative and must be regulated in accordance with government-set criteria to be safe for consumers. It is also measured in fuel exhaust to control for environmental pollution and in cement plants for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • O2 Monitoring in Air

    Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified gas.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Analytical instrumentation for the emission monitoring industry

    Analytical instrumentation for the emission monitoring industry. Criteria emission monitoring, explosion area emission monitoring, incineration emission monitoring.

    By Focused Photonics Inc. (FPI) based in Hangzhou, CHINA.

  • Gas analysis & monitoring systems for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Ambient air monitoring by FID detection – airmoVOC BTEX

    Urban pollution is a problem that concerns more and more people in charge of public health. In large cities, car emissions are an important source of atmospheric pollution. This problem is growing as the traffic keeps on increasing. BTEX compounds are present in car emissions. It is therefore important to be able to analyze them with short analysis cycle duration and on a continuous and automatic way.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Ambient Stations for Ambient Air Quality Monitoring

    Ambient air monitoring involves the measurement of `representative` air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Industrial solutions for air quality monitoring

    To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our customers.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Premium

    Industrial monitoring solutions for the flow monitoring areas

    Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental`s Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Opacity monitoring for continuous emissions

    The history of air pollution regulation dates back as far as the 13th century when in 1273, Edward I (Longshanks) of England prohibited the burning of sea coal in London. The smoke produced by its combustion was considered detrimental to human health. By the late 19th and early 20th centuries, regulations were being passed that sought to control air pollution predominantly for smoke and odour control. Traditionally, regulators were concerned with the visual impact of the discharge from a stack or chimney. Therefore...

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Premium

    Meteorological sensors for dust monitoring

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you