Only show results available in Virginia? Ok

air pollution regulation Applications

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Air emissions testing for air regulations and compliance consulting

    There are many businesses that release emissions into the air due to their daily processes. Because there are regulations in place to minimize pollution, these businesses need the help of air testing companies to make sure they are in compliance with the regulations. We perform air emissions testing to let your business know whether it falls within the set guidelines, as well as emissions monitoring services to ensure you remain within the regulations. This will keep the environment around your plant healthy and ensure you don’t accrue fines for violations.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Premium

    Air Pollution Control Solution for the HCl, HF, and Halides

    The severity of these contaminants requires the most advanced removal and treatment technologies. Macrotek has extensive experience in designing systems that will meet and exceed customers` requirements and regulations. In addition, the corrosive nature of these gases requires specific consideration for material selection.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control solution for the particulate matter

    Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air pollution control solution for the NOx and CO2

    Specific industrial applications require wet end of pipe treatment for NOx or CO2. Macrotek offers absorbers utilizing various reagents for neutralization of NOx or CO2. NOx scrubbing is particularly suitable in situations where Nitric Acid can be utilized elsewhere in the plant, as it is a scrubbing product. As CO2 regulations become more stringent, methods for reducing emissions are continually being evaluated. Macrotek offers CO2 scrubbing technology which isolates CO2 in a contaminated stream to produce a pure CO2 product, making sequestration a more appealing option.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • SO2 Monitoring in Air

    SO2 (sulfur dioxide) is measured in a number of applications. SO2 is used as a food grade preservative and must be regulated in accordance with government-set criteria to be safe for consumers. It is also measured in fuel exhaust to control for environmental pollution and in cement plants for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Opacity monitoring for continuous emissions

    The history of air pollution regulation dates back as far as the 13th century when in 1273, Edward I (Longshanks) of England prohibited the burning of sea coal in London. The smoke produced by its combustion was considered detrimental to human health. By the late 19th and early 20th centuries, regulations were being passed that sought to control air pollution predominantly for smoke and odour control. Traditionally, regulators were concerned with the visual impact of the discharge from a stack or chimney. Therefore, emission limits were expressed in terms of colour or opacity. Modern methods for opacity measurement still use the darkness of the stack gases to measure the amount of smoke or dust emitted within the exhaust gases.

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Airport Environmental Monitoring

    Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential.

    Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. Installed at various locations around the airport, deployed with it’s own integrated anti-biofouling system, utilising the GSM network, the monitoring sites send data to a secure ftp site, where any internet enabled device can access the data. In this way the systems act as any early warning system allowing any hydrocarbon discharge to be detected in real-time.

    Optional environmental monitoring features include remote control to allow the user to turn equipment on and off, change the sample rate and detection range. There is also a facility to allow SMS text and email alarm notifications triggered by user-defined set-points together with customised web pages, data displays and automated data downloads via an ftp server.

    Airport runoff can contain high concentrations of various pollutants, in particular polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the environmental levels of which have to be monitored. An understanding of the magnitude of contamination due to airport runoff water is important for the effective management of airport infrastructure. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited to the airport environment.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Air monitoring equipments for workplace and personal exposure monitoring

    Many occupations involve the use of hazardous substances or processes, where pollutants may be ingested, inhaled or absorbed through the skin. General ambient pollutants can also have health implications in otherwise non-hazardous workplaces. Occupational exposure limits regulate many pollutants based on an eight-hour working day. Personal exposure assessments can be made over an eight-hour period (Time Weighted Average (TWA) exposure) using our simple to use monitoring equipment.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Industrial Solution for pulp & paper

    Stringent regulations all over the world, including the new Boiler MACT ruling, are being enforced on new and existing air pollution control systems. Many of the existing scrubbers are having a more difficult time meeting performance criteria. Macrotek has the innovative solutions to retrofit existing systems or replace with new systems to meet and exceed new targets.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Gravimetric analysis for soil consultancy

    There are many businesses that release emissions into the air due to their daily processes. Because there are regulations in place to minimize pollution, these businesses need the help of air testing companies to make sure they are in compliance with the regulations. We perform air emissions testing to let your business know whether it falls within the set guidelines, as well as emissions monitoring services to ensure you remain within the regulations. This will keep the environment around your plant healthy and ensure you don’t accrue fines for violations.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Marine emissions monitoring

    In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines for failing to meet these new requirements on the “polluter pays” principle.

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you