Only show results available in Virginia? Ok

air purifying Applications

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Demolition and Construction Projects

    Demolition and construction projects release a combination of dust and bio-contaminants which are irritating and potentially harmful. The dust generated during these projects must be contained and captured. Depending on the risk assessment, HEPA air scrubbers can be used to purify air at a work area or negative pressure containment. HEPA negative air machines can be used to prevent the spread of dust and other contaminates to the outside area. The air filtration equipment, pressure monitors, and purifiers for bio-contaminants are briefly described below with interactive links to more detailed information.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Mold Control

    Controlling mold spores and bio-contaminants is a challenge for indoor gardeners that requires attention to detail and specialized equipment. An average cubic foot of air has around 100,000 mold spores. When sufficient moisture is available, mold grows. AgriAir Purifiers control and eliminate Aspergillus and many other types of spores, mildew, odors, and VOC as well as sanitize the air and hard surfaces from biological contaminants generated by organic decay during the entire growing process. AgriAir Purifiers generate ionized-hydro-peroxides, which result in a proactive method of indoor air sanitation and promote organic garden production. This purification method eliminates the need for the use of additional chemicals or biocides that generally contain toxic compounds. AgriAir products can safely be used in occupied spaces throughout the entire grow cycle all while effectively destroying mold spores and other harmful bio-contaminants.

    By AgriAir Equipment based in Mukilteo, WASHINGTON (USA).

  • Odor Control

    AgriAir purifiers will rid the air of volatile organic substances that may be associated with indoor growing operations. Our line of air purifiers is designed to remove odors and sanitize the air by destroying contaminants at the source, not masking them. Available in a variety of models that are designed to suit any commercial operation. Large or small-scale grow, AgriAir has a purifier designed to meet your garden’s demands.Indoor cultivation always gives the grower the upper hand. In indoor growing, you have the full control of the environment for your plants. Light, water, nutrients, temperature and humidity can all be controlled. However, you also need to control the odor of plants growing indoors.

    By AgriAir Equipment based in Mukilteo, WASHINGTON (USA).

  • Bio-Contaminant Control

    Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to protect potentially vulnerable patients from dangerous microbes. In this new era of exponentially expanding plant pathogens affecting indoor crops, Hydroperoxide generators built into the AgriAir system are the answer to concerns that the airborne environment stays as sterile as possible. IHP technology destroys microbes, pathogens, and virus by changing their molecular structure and rendering them harmless.

    By AgriAir Equipment based in Mukilteo, WASHINGTON (USA).

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Healthcare and Lab Equipment

    Omnitec Design is concerned with providing the highest levels of protection for hospital workers and patients. After hospital cleaning staff carry out infectious disease control cleanup procedures (the removal of all physical items) in the infected areas, the room can then be put back in service faster if the air is purified and sterilized using an OmniAire PAC Portable Air Cleaner with high output PEROx air purifier module.xide plasma generator. This results in minimal room shut down and disruption which is a major concern for all hospital administrations. To create a clean room environment for hyper-sensitive patients, the room can be positively pressurized with clean, sterile air to prevent bio-contaminants to migrate into the room. This protective environment is recommended for HIV patients, bone marrow transplant, ICU rooms, diabetes patients, cancer patients, stem cell transplants and other high risk patients.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Disaster and Epidemic Response

    Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities. To comply with CDC guidelines to prevent the spread of disease and contamination of sensitive areas, OmniAire HEPA air filtration machines are commonly used to: -Create a negative air pressure in isolation containment -Supply purified air for required air changes (ACH) -Sanitize airflow in operating and patient’s rooms -Purify air in waiting rooms and public areas -Prevent contamination in compounding pharmacies

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Air pollution control (APC) equipments for metal industry

    In the production of metals from ore or recycled products there are many processes where pollutants form. Smelters require high amount of energy and depending on the source of this energy and where production takes place, energy consumption can also contribute to the amount of pollution in your flue gas. In processes for metals, the metal should be purified from unwanted materials. It is inevitable that these materials as well as small amounts of the metals end up in the flue gas. Our technology is unique in its approach. It does not matter if your pollution is particulate matter, even if they are the smallest possible fraction of PM2.5, or if they are aerosols. Our patented technology handles them all. Because of the cost of production disruptions, the reliability and the high availability of our solutions provide benefits that further enhance the benefits of our technology solutions.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Atmospheric Water Generators

    WaterMicronWorld, Ltd. is engaged in the research and development, manufacturing, marketing, and worldwide distribution of atmospheric water generators, filtration, ionization, and purification devices and chemicals. The Company’s various products include Atmospheric Water Generators, the WaterMicronWorld™ (AWG-30H/O Home or Office machine) and an extensive line of C-Series industrial grade Atmospheric Water Generators capable of producing 200,250, 500, 1000, 3000, and up to 5000 liters per day of pure fresh drinking water. For more information on WaterMicronWorld, Ltd., please visit our website at: www.watermicronworld.com WaterMicronWorld, Ltd utilizes a revolutionary AWG (Atmospheric Water Generation) technology to produce safe and drinkable water. AWG refers to the technology of extracting and producing purified drinking water from the humidity present in the air. To produce pure water, it requires no plumbing or any type of external water source.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you