Only show results available in Virginia? Ok

air quality monitoring equipment Applications

  • Air Quality Monitoring Equipment for Industry

    Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Air Quality Monitoring Equipment for Sample Handling Industry

    Within the field of gas analysis much time is spent looking at the accuracy and uncertainty in the detection technique. However, without appropriate sample handling, what you are measuring could potentially bear little or no relation to your original sample.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Air Quality Monitoring Equipment for Automotive Industry

    Engine and vehicle emissions testing involves complex routines and audit regimes to meet with exacting modern legislation.  The methods for measuring gases are also prescribed by the relevant authority and so you might imagine that the equipment for emissions testing is all the same.  Signal take a different approach to our competitors. By designing bespoke systems from a selection of standard modules, we supply all the equipment and features you require, but nothing that you don`t.  This makes our systems the most cost effective solution, particularly when upgrading or for non-standard combination testing

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Air monitoring for laboratories

    Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels.

    Common air monitoring applications include:

    • Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination.
    • Asbestos sampling and analysis

    By GE Healthcare UK Limited based in Little Chalfont, UNITED KINGDOM.

  • Air monitoring equipments for outdoor & indoor air quality

    Gradko’s ambient air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Air Quality & Emission Management Issues

    • Development of documents substantiating the volumes of emissions of pollutants into the air from stationary sources for enterprises, organizations and private entrepreneurs; • Inventory of air pollutants emissions from stationary sources; • Preparing, maintenance support of documentation for receiving a Permit for Emissions of Pollutants into the Air from Stationary Sources (PEPASS) *, issued by the Departments of Environment and Natural Resources of the regional state administrations of Ukraine; • Development and registration of dust and gas cleaning equipment passports; • Monitoring of the dust and gas cleaning equipment effectiveness; • Quality control of the implementation of projects of Maximum Permissible Emissions (MPE); • Calculation of fees for environmental pollution (environmental tax) on the basis of amount of emission of pollutants into the air.

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Premium

    Air sampling & monitoring systems for commercial nuclear industry

    Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B Performance Specification 15. Gasmet™ Gas Analyzers and Calcmet™ software have been designed to take the requirements of the performance specification into account.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    High quality gas sensor solutions for mining

    Fast, accurate and reliable measurement of CH4. The extraction of coal releases methane gas, which can mix with the air in a mine to form a hazard due to its flammability. Ventilation with fresh air from the surface is used to dilute the methane and reduce the risk of explosion. Monitoring of the methane content of the stale air exiting the mine allows the amount of ventilation to be controlled. Although our sensors are not ATEX approved for use in potentially explosive atmospheres they are suitable for monitoring air containing methane concentrations below the lower explosive limit. Our OEM products can be built into equipment which is approved for use in the monitoring of mine exhaust gas and similar applications.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Pollutant monitoring for the manufacturing industries

    Ormantine`s air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA`s many solutions have applications from personal exposure monitoring to long term fence line monitoring studies.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Integrated real-time gas analysis solution for semi-gases industry

    CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time response.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you