Only show results available in Connecticut? Ok

air quality monitoring solution Applications

  • Premium

    Ambient air quality monitoring solutions for street-level monitoring

    To measure the air quality in a city is a challenge. A large number of gaseous components need to be measured with high accuracy. The monitoring site needs to be representative for the city and the system has to be easy to maintain and calibrate. The OPSIS open-path monitoring systems provide a flexible solution, giving the average concentration for an area. A single OPSIS system can measure all relevant gaseous components set by the authorities, such as NO, NO2, SO2, O3, BTX, NH3.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for tunnel monitoring

    Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels decreases.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for remote sensing of ship emissions

    New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be measured.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for fence-line monitoring

    The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB based in Furulund, SWEDEN.

  • Air quality monitoring solutions for oil and gas facilities industry

    Monitoring the potential escape of pollutant gases from industrial sites can be difficult to achieve due to changing weather conditions, which may require a large number of monitoring stations downwind of the escapes. Due to changing wind speed and direction, plus the large size of many of these sites, the number of monitoring points required to ensure detection of an escape can become cost prohibitive. AQMesh provides a much lower cost solution, allowing many monitoring points to be located around the facility...

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Premium

    Ambient air quality monitoring solutions for urban air quality monitoring

    To measure air quality in the ambient air is a challenge. The monitoring site needs to be representative and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for benzene fence-line monitoring

    To monitor benzene emissions can be a challenge, but OPSIS makes it easy. Benzene is an aromatic hydrocarbon liquid that evaporates quickly if exposed to ambient air. It is one of the most commonly used substances in the chemical industry and it is known to cause cancer. For this reason, refineries in the United States must start monitoring fugitive emissions of benzene from January 30, 2018. This is part of the 2015 U.S. EPA Petroleum Refinery rule. In case a yearly rolling average of benzene concentrations...

    By Opsis AB based in Furulund, SWEDEN.

  • Air quality monitoring solutions for urban sector

    Urban air pollution is typically a variety of pollutants mixing at different rates depending on their source and local weather conditions within bust, built-up areas. Many small air quality sensors are often limited by the impact of these fluctuating temperatures and levels of humidity, but AQMesh has been carefully developed to withstand and compensate for the effects of complex environmental conditions.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Air quality monitoring solutions for smart cities sector

    Many urban areas are using a range of Internet of Things (IoT) devices to collect data that can be used to help manage resources efficiently. These ‘smart cities’ are often incorporating environmental sensor technology into their networks to better understand air pollution and its impact on the people living and working in the city. Cities and towns typically have one or two traditional monitoring stations, meaning many neighbourhoods do not have access to regular, localised air quality information...

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Premium

    Solutions for fence-line and perimeter ambient air monitoring

    Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling hardware.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Forklift & Small Engine Exhaust Gas Analyzer for Critical Monitoring of Forklift Emissions and Warehouse Ambient Air Quality

    E Instruments International’s gas monitoring specialists performed a forklift exhaust gas analysis and an ambient air quality analysis at a Pennsylvania warehouse in which a fleet of propane forklift trucks is operated on a daily basis. The main objectives of these tests were to investigate:

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Particle measurement and sampling equipment for Air quality

    Dekati® Solutions for air quality particle measurements include both air quality monitoring and atmospheric aerosol research instruments. Our aerosol measurement solutions have been successfully used in various ambient aerosol research and monitoring areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of airborne particles

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Indoor Air Quality Monitor for Why Energy Auditors Need to Measure CO2 (IAQ)

    An increasingly dangerous trend in home and building Energy Audits focus solely on the “Energy Efficiency” of the building while ignoring the potential risks of sealing “IN” CO2 emissions and moisture in the home causing serious health and comfort concerns. By sealing your home to be “Air Tight” for the purpose of decreasing gas and electric bills, you could also be making our buildings TOO TIGHT. In many cases, the benefits associated with a drop of energy usage carry a heavy...

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Environmental monitoring solution for sulfuric acid plants

    Measurement of SO2, sulfuric acid mist and greenhouse gas emissions from sulfuric acid plants requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA.

  • Industrial solutions for air quality monitoring

    To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our customers.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you