-
Keyword: air quality system ×
Air Quality Monitoring Stations
by Opsis AB based in Furulund, SWEDENOpsis provides complete AQM stations, used for street-level, urban trend and background applications. The monitoring systems have been approved by the German TÜV and the U.S. EPA among others.
Air quality monitoring for regulatory purposes
by Ecotech Pty Ltd based in Knoxfield, AUSTRALIAAir quality monitoring for regulatory purposes requires instrumentation, systems and procedures that meet international standards such as those described by the USEPA, MCERTS or the European Union. Ecotech offers solutions that meet this criteria.
Air Quality Monitoring Equipment for Industry
by Signal Group Ltd based in Camberley, UNITED KINGDOMSignal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.
PTR-MS systems for indoor air quality monitoring
by Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIARoom-air VOC detection and monitoring. Measurement of most common VOCs causing smells or health effects. Real-time monitoring of emissions related to the Sick Building Syndrome. Ozone induced reactions in aircraft cabins.
Air quality monitoring for traffic
by AQMesh based in Stratford-upon-Avon, UNITED KINGDOMModern intelligent traffic systems are designed to move traffic in an efficient manner as well as reduce the environmental impact of traffic on nearby populations. This includes the effects of noise, particle pollution and gases.
Ambient air quality monitoring at airports
by Opsis AB based in Furulund, SWEDENTo measure the ambient air quality at airports is a challenge. The monitoring site needs to be representative for background levels and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability. The OPSIS DOAS system provides the user with a fast system that gives high availability at low cost. The impact of aircraft take-offs and landings can easily be followed on-line. The OPSIS system can also monitor fugitive emissions from other sources at the airport.
Disinfection of air-conditioning systems
by Dimtech S.A based in Keratsini, GREECEThe good condition of an air-conditioning system in terms of hygiene is a key element in maintaining at a high level the quality of indoor air. In this way an important factor in human health is ensured. The basic steps related to the hygiene of an air-conditioning installation are: Mechanical cleaning of vents. Chemical cleaning and disinfection.
Air Quality Monitoring Equipment for Automotive Industry
by Signal Group Ltd based in Camberley, UNITED KINGDOMEngine and vehicle emissions testing involves complex routines and audit regimes to meet with exacting modern legislation. The methods for measuring gases are also prescribed by the relevant authority and so you might imagine that the equipment for emissions testing is all the same. Signal take a different approach to our competitors. By designing bespoke systems from a selection of standard modules, we supply all the equipment and features you require, but nothing that you don`t. This makes our systems the most cost effective solution, particularly when upgrading or for non-standard combination testing
Air cleaning system for the gaming
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Casino operators were some of the first to be able to put a price tag on indoor air quality and to realize the impact that IAQ has on customer traffic. As a result, you’ll find more Dynamic Air Cleaners in casinos than any other high efficiency air cleaners. Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone.
Air cleaning system for the government buildings
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Dynamic Air Quality Solutions has been part of many high profile Government projects including the Securities and Exchange Commission headquarters and the anthrax clean-up effort at the Brentwood Post Office in Washington D.C. Since 2005, Dynamic Air Cleaners have been installed in over 200 government projects in the U.S. and Canada, including state & local and military sectors.
Air cleaning system for the museums
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Indoor air quality has become as important as temperature and humidity when it comes to the preservation of valuable collections in modern metropolitan galleries, archives, libraries and museums. From the San Francisco Museum of Modern Art to Philadelphia’s Barnes Foundation, designers have used air cleaning technology from Dynamic Air Quality Solutions to provide clean, contaminant-free air to some of the most valuable collections in the world. Coast to coast and around the world, Dynamic has successfully removed airborne contaminants from indoor air as well as outdoor ventilation air at needs of museums, art galleries, visual and performing arts centers, aquariums, and maritime centers.
Air cleaning system for the healthcare industry
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Indoor Air Quality and advanced environmental control strategies are playing a growing role in patient safety as hospitals and medical care facilities strive to improve wellness metrics and provide the best in healing environments. Three key factors make attention to indoor air quality particularly important in health care settings.
Air cleaning system for the transportation
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Dynamic Polarized-Media Air Cleaners have been installed in mobile refrigeration units and have significantly improved indoor air quality in buses and trains. In refrigerated transports, improved air quality translates to longer stock life for perishable produce, which means big savings and reduced spoilage.
Air cleaning system for the green buildings (LEED)
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Dynamic Air Quality Solutions is proud to be a member of the U.S. Green Building Council (USGBC). The Leadership in Energy and Environmental Design (LEED) Green Building Rating System is the benchmark for the design, construction, and operation of high performance green buildings. LEED gives building owners and operators the tools they need to have an immediate and measurable impact on the environment and their buildings` performance.
Air cleaning systems solution for clean rooms
by GGE srl based in Rio Saliceto, ITALYA “white room” is a room where aeration, ventilation, air filtration, building materials and operating procedures are prescribed in order to control the concentration and quality of the particles which are present in the air and to meet adequate cleaning standards.
Power Generation
by Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA)MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.
Gas monitoring instruments and systems for stack testing
by Gasmet Technologies Oy based in Helsinki, FINLANDSeveral EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.
Air sampling & monitoring systems for commercial nuclear industry
by HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA)Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.
Air cleaning system for the higher education areas
by Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA)Dynamic Air Cleaners are an ideal indoor air quality solution for schools, colleges and universities. Without sacrificing budgets, higher education institutions can utilize these highly-versatile air cleaners to lower energy costs and establish greener, healthier learning environments for teachers and students. A report from The American Institute of Architects, The Redford Center, ICLEI USA – Local Governments for Sustainability and the U.S. Green Building Council (USGBC) estimates inefficiency costs the average school $100,000 each year. The report also states 14 million students attend schools considered below standard or dangerous, with more than 15,000 schools having air deemed unsafe to breathe. Generating a return on investment in three to five years, Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss, including odors, smoke, bacteria, allergens, fine dust, mold and pollen, without producing any harmful ozone.
Aerospace
by PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLICOur Auxiliary Power Unit (PEJ/APU) and Environmental Control Systems (ECS) are used by aeroplane and helicopter manufacturers all over the world. The successful products of the company also include the range of Main Power Units – turbine, turboprop and turboshaft engines for small manned and unmanned airplanes and helicopters. We provide also subdeliveries for the aerospace industry, for example electroplating, precision casting of guide wheels and blades of gas combustion turbines for aircraft engines, or precision machining. The testing laboratory, where final products are tested, is an important part of the aerospace programme. The production process is controlled by the quality system according to AS 9100, ISO 14 001 and ISO 9001.
