air sampling instrumentation Applications

15 Results found
Only show results available in Virginia?
OK
  • Keyword: air sampling instrumentation ×

Gas monitoring instruments and systems for process NOx measurement

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

Gas monitoring instruments and systems for engine emissions measurements

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

Air Quality Monitoring for the Aerosol Sampling Industry

by MSP Corporation     based in Shoreview, MINNESOTA (USA)

MSP’s aerosol instrument products include cascade impactors, virtual-impactor concentrators, personal PM samplers, micro-environmental PM Samplers, condensation particle counters, an asbestos fiber monitor, aerosol generators, electrical ionizers, differential mobility analyzers, laser particle counters and wide range particle spectrometers.

Air sampling & monitoring systems for energy/utilities industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

Air sampling & monitoring systems for universities, colleges & professional schools

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q realizes and supports the efforts of higher education with a variety of air sampling equipment, systems and accessories.  Many of instruments are used as teaching aids for future Health Physicists, Radiation Safety Officers, Industrial Hygienist, Environmental Engineers and other industrial disciplines.

Air sampling & monitoring systems for biomedical, chemical & pharmaceutical industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Product Company provides air sampling instrumentation & systems for several niche applications in a number of disciplines in the broad area of `Life Sciences`. In the Biomedical, Chemical, & Pharmaceutical industries, HI-Q has marketed instrumentation for certain applications for many years. Our ambient, in-door breathing level air samplers, commonly known in the industry as `Goose-Neck` or `Giraffe` air samplers have been instrumental in analyzing workplace exposure. HI-Q has also developed accurate pre & post heap filtration stack sampling systems to aid laboratories in inventory control & atmospheric exposure monitoring for chemicals such as Radio Iodine.

Mercury monitoring for manual analysis of air traps

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 2600 versatility is evident with the economical and convenient configuration for manual analysis of air samples collected on gold cartridges. Converting the instrument allows calibration by simple injection of gaseous Hg using the Tekran 2505. Once analyzed, the gold cartridges are immediately ready for redeployment.

Measurement of diacetyl in ambient air to monitor workplace exposure limits.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Diacetyl Analyzer provides direct measurement of Diacetyl in ambient air. This instrument is utilized for environmental monitoring and to monitor workplace exposure limits. The Series 8900 Analyzer for Diacetyl employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Diacetyl and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. The Diacetyl is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

Measurement of formaldehyde in ambient air for monitoring workplace exposure limits

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Formaldehyde Analyzer provides direct measurement of Formaldehyde in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Formaldehyde Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Formaldehyde and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Formaldehyde is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Measurement of acrylonitrile in ambient air for monitoring workplace exposure limits

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Acrylonitrile Analyzer provides direct measurement of Acrylonitrile in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Acrylonitrile Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Acrylonitrile and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Acrylonitrile is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Measurement of hydrogen sulfide & carbon disulfide in air for continous emission monitoring

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Hydrogen Sulfide and Carbon Disulfide Analyzer provides direct measurement of H2S and CS2 in ambient air. This instrument is utilized for continuous emission monitoring. The Series 8900 H2S and CS2 Analyzer employs a Photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the H2S, CS2, and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. H2S and CS2 are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

by Environnement S.A     based in Poissy, FRANCE

With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to fixe or mobile ambient air quality monitoring laboratories. The VOC72M is fitted with a PID detector new generation, much more sensitive, more stable and whose lamp does not need to be cleaned; the analyzer integrates flow control fittings a 3 levels security system built on and uses only one gas (nitrogen). This robust and low maintenance instrument performs all the functions (sampling, analysis and data management) in a simple and completely autonomous mode. It is a particular

Measurement of naphthalene in ambient air to monitor workplace exposure limits & at remediation & Superfund sites

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Naphthalene Analyzer provides direct measurement of Naphthalene in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits and at remediation and Superfund sites. The Series 8900 Naphthalene Analyzer employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Naphthalene and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Naphthalene is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

Related Terms for air sampling instrumentation

Need help finding the right suppliers?

Let the XPRTs do the work for you