Air Toxics Monitoring Applications

Portable Stack Monitoring

Many industries are required to measure stack emissions of toxic gases periodically, but not continuously. Extractive wet chemical methods currently used are slow, labor intensive and expensive. A single GasFinderFC can perform stack monitoring requirements for a specific gas, quickly, easily and accurately.

By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

Premium

Monitoring of mercury in ambient air

Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides di rect real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of me rcury concentration in ambient air.

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Measurement solution for accurate continuous formaldehyde measurement formaldehyde in emissions and ambient air applications

Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human health.

By Protea Limited based in Middlewich, UNITED KINGDOM.

Premium

Gas monitoring instruments and systems for compressed breathing air

Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line breathing (hard-helmet diving), respiratory equipment used on ground for escaping from toxic atmospheres and for working in contaminated atmospheres. It also covers breathing gas for hyperbaric operations and synthetic air. While EN 12021 does not cover aerospace applications, the British MOD publication DEF STAN 68-284 and its counterparts in other countries cover also the breathing gases used in aviation.

By Gasmet Technologies Oy based in Helsinki, FINLAND.

Premium

Waste water treatment plants Air quality control by TRS MEDOR

Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling and polluted air is captured and neutralised by a chemical cleaning process called ‘’Stripping’’. The correct amount of chemical products needed to neutralise the polluted air has to be calculated.

By Chromatotec Group based in Val de Virvée, FRANCE.

Premium

Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

By Chromatotec Group based in Val de Virvée, FRANCE.

Premium

Testing Fume Hood Flow Dynamics using SF6 as a Tracer Gas

A safe laboratory environment requires an effective method for clearing toxic material from fume hoods. Since all handling of toxic materials is completed in these hoods, it is critical to have a procedure to evaluate their operation to assure adequate protection for laboratory workers. The InfraRan Specific Vapor Analyzer, factory calibrated for SF6, is an ideal instrument for measuring fume hood efficiency in accordance with ASHRAE and other standards. Manufacturers identify the flow dynamics (factors that affect air flow in the hood and performance with air) using the ratings AM (as manufactured), AI (as installed), and AU (as used). A fume hood evaluation conducted under its operational environment is critical, as these tests will indicate any installation shortcomings as well as direct workers in proper laboratory hood techniques.

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Premium

Direct determination of mercury content in ambient air

Introduction

Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems.

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Waste water treatment plants Personnel Safety & H2S filter management

Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S and Methylmercaptan increased. Safety of employees on such working sites has therefore become of major problem. To fight this hazardous pollution, air filtering systems have been installed. For the station managers, personal safety coupled with the need for constant air quality control and filter change has been a heavy task.

By Chromatotec Group based in Val de Virvée, FRANCE.

Premium

Waste water treatment plants Screening area: stripping

Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment works an H2S analyzer has been installed in the main building to complement the protection provided by individual monitors. Chromatographic measurements show that other sulfurous compounds including Methylmercaptans are present in the air in addition to H2S.

By Chromatotec Group based in Val de Virvée, FRANCE.

Premium

Gas Detection for the Gas Industry for the Indoor Air Industry

Sewerin manufacture a wide range of gas warning detectors suitable for many different gas monitoring, detection and warning applications.
Sewerin gas detectors are used to monitor and warn of the dangers from explosive, toxic and asphyxiating gases.

By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

Premium

Mercury monitoring for on-site remediation

Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for multiplexing the Tekran2537 for real-time continuous on-site monitoring of mercury fugitive emissions.

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

Subscribe to our eBulletins

Add Supplier Profile