Only show results available in Virginia? Ok

alternative energy Applications

  • Alternative Fuel Production

    Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most anything in between.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Premium

    Processing of Alternative Fuels for the energy industry

    RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Automated monitoring for the alternative fuel sector

    Automated monitoring for the alternative fuel sector.

    By Rel-Tek Corporation based in Monroeville, PENNSYLVANIA (USA).

  • SRF

    SRF Manufacture is an alternative fuel produced by shredding and dehydrating solid waste, typically consisting of combustible components of solid waste, including paper, card, wood, textiles and plastic. It can be produced to a range of specifications to meet customer requirements. Solid Recovered Fuel Manufacture The materials used to produce Solid Recovered Fuel pass through a series of shredders, screens, air classifiers/density separators and magnets. Inert materials, recyclable plastics and metals are extracted from the shredded material, leaving a mix of mainly non-recyclable paper, card, wood, textiles and plastic. Although a small proportion of these materials can be recycled the quality of these materials is compromised once they enter the residual waste stream and recovering energy from these materials is currently the best environmental option. For More information: https://the-mkgroup.com/portfolio/srf-manufacture/

    By MK Group based in Galbally, IRELAND.

  • Premium

    Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI has been designing and manufacturing size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuel. SSI has supplied hundreds of systems worldwide for generating energy from many different waste materials—from industrial, municipal, and hazardous wastes to tires, mill waste, wood and other organic materials.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Premium

    Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

    By WEIMA based in Ilsfeld, GERMANY.

  • Production of Biofuels from Microalgae

    Production of biofuels from certain microalgae and cyanobacteria would appear to be the most promising alternative to current methods, since its yield is very high, sustainable, uses either wastewater, brackish or seawater, does not require the use of agricultural land, does not compete with human food and the cultivation process consumes the CO2noxious gas.

    ALGAENERGY is responsibly paving the way towards making microalgal-based biofuels industrially profitable.  The R&D projects assigned to this task include work on selection and genetic engineering of different microalgae to produce substantial lipid-carriers, some of them patented, as well as the establishment of a suitable and scalable production process.

    By AlgaEnergy, S.A. based in Alcobendas, SPAIN.

  • Premium

    Recycling Systems for the engineered fuel, biomass / RDF

    Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Recycling equipments for municipal solid waste (MSW) recycling

    During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is important to reduce the waste volume into a homogeneous fraction size of e.g.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Mined Landfill

    Mining landfill is an innovative practice, which is a paradigm shift in waste management, where landfills can be considered storage of feedstock for waste to energy plants such as Gasplasma®. It works by: Extracting buried waste / Recovering valuable recyclates: glass, metals, hard plastics / Returning land for alternative uses / Eliminating greenhouse gas emissions caused by decomposing wastes

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Wind or solar powered sewage treatment plants

    Use natural air currents for aerobic sewage treatment via venting pipes. Alternatively, they can be solar powered using a very low energy 12 Volt fan. The FILTERPOD requires no electricity for the treatment process. They finally allow modern, high quality sewage treatment for all regions of the world, even for off-grid locations.

    By Water Technology Engineering Ltd. (WTE) based in Bolton, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you