Only show results available in Virginia? Ok

alternative fuel Applications

  • Alternative Fuel Production

    Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most anything in between.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Automated monitoring for the alternative fuel sector

    Automated monitoring for the alternative fuel sector.

    By Rel-Tek Corporation based in Monroeville, PENNSYLVANIA (USA).

  • Processing of Alternative Fuels for the energy industry

    RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your expectations.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Shredding Technology for Refuse Derived Fuels (RDF) - Energy

    RDF raw material is a mixture of many different materials, so it has a strict request on machine long-term performance stability and blade anti-corrosion characteristics to shred both hard and soft materials such as plastic etc. Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Recycling Systems for the engineered fuel, biomass / RDF

    Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Measurement solution for hydrogen fuel cell testing

    As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above these thresholds are present in the H2 fuel then there is a risk of not only making the cell inefficient, but also unrecoverable back to its peak operating voltage as the fuel cell electrode becomes poisoned.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Cetane Number of Diesel Fuels #3010

    The Cetane number of a diesel fuel is a measure of the ignition properties and is an important specification that must be met during fuel production. The traditional laboratory method for Cetane number determination is the knock engine method in which the fuel is burned and its combustion characteristics compared to known standards. This method is time and labor intensive, and provides no ability for real time control of production. This note discusses the use of Guided Wave hardware and software tools for the measurement of Cetane number in diesel fuel using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR is applied in real-time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods.

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Sustainable solutions for transportation & logistics industry

    Innovative fuel and process alternatives are urgently needed in this energy-intensive sector. Our unrivalled sustainability data and software technology help you create a more sustainable balance.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Recycling equipments for municipal solid waste (MSW) recycling

    During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is important to reduce the waste volume into a homogeneous fraction size of e.g.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Premium

    Shredding systems for solid & bulky waste

    SSI offers a variety of low-speed, high-torque shredders for size reduction and recycling of solid, bulky waste of nearly all sizes and materials. SSI reducers and shredders are widely used to downsize commingled bulky waste as well as commercial and residential waste streams for volume reduction, to liberate and reclaim recyclables, for composting applications, and to create alternative fuel sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

    By WEIMA based in Ilsfeld, GERMANY.

  • Percent Aromatics in Gasoline #3008

    The aromatic content of gasoline determines many of its combustion properties. Since it also impacts the environmental characteristics of the fuel it is desirable to have accurate measurements of this parameter. The traditional analytical method for measuring aromatics is either gas chromatography (GC) or an older method entitled fluorescent indicator adsorption (FIA), both of which are time and labor intensive. This note will discuss the use of Guided Wave hardware and software tools for the measurement of % aromatics in fuel products using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR can be applied in real time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods. Request Application Note #3008

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • SRF

    SRF Manufacture is an alternative fuel produced by shredding and dehydrating solid waste, typically consisting of combustible components of solid waste, including paper, card, wood, textiles and plastic. It can be produced to a range of specifications to meet customer requirements. Solid Recovered Fuel Manufacture The materials used to produce Solid Recovered Fuel pass through a series of shredders, screens, air classifiers/density separators and magnets. Inert materials, recyclable plastics and metals are extracted from the shredded material, leaving a mix of mainly non-recyclable paper, card, wood, textiles and plastic. Although a small proportion of these materials can be recycled the quality of these materials is compromised once they enter the residual waste stream and recovering energy from these materials is currently the best environmental option. For More information: https://the-mkgroup.com/portfolio/srf-manufacture/

    By MK Group based in Galbally, IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you