Only show results in Texas? Ok

aluminium recycling Applications

  • Premium

    Recycling equipments for aluminium recycling

    Aluminium items are eminently suited to recycle. Did you know that aluminium can be recycled infinitely without losing quality? Recycling aluminium beverage cans saves 95% of the energy used making an aluminium can, compared to making it from raw bauxite. The energy saved from recycling one aluminium Coca Cola can will run a TV for three hours. If not recycled, it takes 80-100 years for an aluminium can to break down in a landfill.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Hydrocarbons and carbon monoxide

    Example: Aluminium recycling. Similar tasks: Recycling of copper, lead, cink.

  • Premium

    Recycling of Used Beverage Cans (UBC)

    The Eldan Recycling System for UBC (Used Beverage Cans) is designed for processing loose or baled aluminium cans to be used as an alternative to virgin aluminium. Aluminium is used in many modern products like pots and pans, building materials and beverage cans. By recycling the aluminium in the UBC, up to 95% of the energy used in production can be reduced compared to production with virgin aluminium, proving aluminium recycling a profitable business! To ensure the product is pure, the cans can be downsized with...

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Special plants for recycling of aluminium

    FORREC pays attention to new technologies and regulations protecting against environmental pollution. The result is the production of customised high-performance machines and systems, which allow the treatment of aluminium profiles in order to obtain materials for recycling that can be used in other industrial sectors. FORREC`s plants are intended to reduce the volume of aluminium and select materials for appropriate re-use. Forrec provides systems for the treatment of aluminium waste either loose or in bales....

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    High-end baling and waste compacting solutions for aluminium/tin cans sector

    Cans made of aluminium or steel are often used to store food, drinks, chemicals and other goods. Both aluminium and steel are valuable materials and are easy to recycle.

    By Presona AB based in Tomelilla, SWEDEN.

  • Premium

    Recycling equipments for cable recycling

    Eldan Recycling has been active within cable recycling close to 60 years. What started with cable cutters, has expanded into including cable strippers, alligator shears and ACSR shears as well as machines and complete plants for processing of cables. Since copper and aluminium is 100% recyclable without loss of quality recycling of cable has always been a popular field.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Monitors and analysers for Aluminium industry

    AMETEK Land makes integrated thermometer systems designed solely for the temperature measurement of aluminium. Our products meet the highest standards of quality and reliability to ensure accurate performance under plant operating conditions.

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Recycling and Washing Equipment for Aluminum Smelters

    Recognized worldwide for its expertise in electricity, the province of Quebec is also the birthplace of the top aluminum smelting operations on the planet.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Shredding solutions for Aluminum SWARFS

    The aluminum industry recovers much of the material required by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the waste.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Air pollution, emission and process monitoring systems for metals

    ENVEA’s extensive range of ambient, emission and process monitoring systems are particularly suitable for use in the often harsh, high temperature and dusty environments found in the Metals Industry. A wide range of measurement technologies are available for monitoring process parameters such as the moisture content of fuels (coal), blast furnace efficiency, the continuous monitoring of sinter dust transfer and silo level indication. In addition, instruments to monitor and identify potential faults in dust...

    By ENVEA based in Poissy, FRANCE.

  • Industrial water treatment products for primary metals

    Water treatment programs within the metal processing industries are integral to the successful manufacturing of quality products. Our water management programs incorporate a complete and in-depth understanding of the mechanical operation of each system being treated.

    By ChemTreat, Inc. - a subsidiary of Danaher Corporation based in Glen Allen, VIRGINIA (USA).

  • Disposable soil headspace testing container

    The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA probes. • Lids snap together so all samples from one well/boring can be easily grouped together. • Reduced potential for injury to...

    By OVT Environmental Products based in Fort Myers, FLORIDA (USA).

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have...

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Metal recycling equipment for Aluminum processing industry

    Jiangyin Hydraulic devoted to offer solution for the biggest apple aluminium products manufacturer, FOxcnn for over 8 years. And designed various systems to help collect every drop of values from Aluminium wastes. In 2016 ,Jiangyin Hydraulic built another production line with functions of waste lifting, crushing, spin-drying, briqutting,liquid collecting system and win Foxcnn’s another admiration. We design and build this system in only 55 days and make the system fully integrated into a 4mx5m area...

    By Jiangyin Metallurgy Hydraulic Machinery Factory based in Jiangyin City, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you