Only show results in Texas? Ok

aluminum recycling Applications

  • Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Aluminum SWARFS

    The aluminum industry recovers much of the material required by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the waste.

    By SatrindTech Srl based in Arluno, ITALY.

  • Recycling and Washing Equipment for Aluminum Smelters

    Recognized worldwide for its expertise in electricity, the province of Quebec is also the birthplace of the top aluminum smelting operations on the planet.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Premium

    Scrap Metal Recycling

    Metal scrap processing requires slow speed shredders and hammer mills to densify scraps such as drums, door & window frames, white goods, and metal skeletons. Many metal recyclers around the world use HARDEN shredders to remove airspace, increase density, so as to reduce transportation costs and improve pricing. The shredding process also prepares materials for sorting, delacquering systems and furnaces. With our hardened knife tips design, HARDEN low speed shredders can be used to process ferrous metal,...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Recycling of Incinerator Slag

    Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Products for electric cables and radiators recycling

    Compact machines and lines for the recovery of copper and aluminum by milling and dry separation of the metal from the insulating part, from aluminum or copper (ex. radiators).

    By Guidetti Recycling Systems based in Renazzo (FE), ITALY.

  • metal scrap recycling

    metal scrap recycling is suitable for the steel plants,recycling companies ferrous non-ferrous metal smelting industry to compress metal scrap(steel paring,waste copper & aluminum, waste stainless steel, scrap from discarded automobiles)into acceptable furnace charges of cuboids, cylinders, octagons & other shapes, so as to reduce the cost of transportation & smelting, to speed up furnace charging.

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for white goods

    Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable metals.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Industrial shredders system for metal shredding sector

    Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.

    By WEIMA based in Ilsfeld, GERMANY.

  • Scrap Metal Baler

    1. Product Name: Y83-250 Scrap Metal Baler For Sale 2. Application: Y83-2500 Scrap Metal Baler For Sale is suitable for the steel plants, recycling companies, ferrous & non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper & aluminum, waste stainless steel, scrap from discarded automobiles) into acceptable furnace charges of cuboids, cylinders, octagons & other shapes, so as to reduce the cost of transportation & smelting, to speed up furnace charging. 3. Metal...

    By Jiangsu Wanshida Hydraulic Machinery Company based in Jiangyin, CHINA.

  • ANIS Automatic binding devices for Cardboard factories and cardboard packaging manufacturers

    The balers in this section are suitable for Printing offices, cardboard factories or cardboard packaging manufacturers, aluminum foils, hygiene paper. The balers are uppgraded to prevent affection by dust and small pieces. Ussually have custom made solution that includes a transport system from the origin of the waste to the baler.

    By Anis Trend d.o.o. based in Loški potok, SLOVENIA.

  • Shredding solutions for refrigerators industry

    SatrindTech shredders are used within the recycling lines of refrigerators. When treated properly, it is possible obtains a total of nearly 90% in different materials (among which iron, plastic, polyurethane, aluminum and copper) from these product. The two shaft shredders are used as primary crushers if used as the first step of the process as they are used for a volume reduction after the collecting cycle, while the three-shaft and four-shaft are used as secondary shredding as they allow a controlled size.

    By SatrindTech Srl based in Arluno, ITALY.

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have...

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Disposable soil headspace testing container

    The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA probes. • Lids snap together so all samples from one well/boring can be easily grouped together. • Reduced potential for injury to...

    By OVT Environmental Products based in Cape Coral, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you