ambient air Applications

42 Results found
Only show results available in Virginia?
OK
  • Keyword: ambient air ×

Perimeter Ambient Air Monitoring

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling hardware

Ambient air quality monitoring for governments

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

SO2 monitoring for the US NCore network, a multi pollutant network to measure  particles, pollutant gases and meteorology.

Ambient Stations for Ambient Air Quality Monitoring

by Opsis AB     based in Furulund, SWEDEN

Ambient air monitoring involves the measurement of `representative` air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background monitoring.

Measurement of diacetyl in ambient air to monitor workplace exposure limits.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Diacetyl Analyzer provides direct measurement of Diacetyl in ambient air. This instrument is utilized for environmental monitoring and to monitor workplace exposure limits. The Series 8900 Analyzer for Diacetyl employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Diacetyl and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. The Diacetyl is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Ambient air quality monitoring at airports

by Opsis AB     based in Furulund, SWEDEN

To measure the ambient air quality at airports is a challenge. The monitoring site needs to be representative for background levels and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability. The OPSIS DOAS system provides the user with a fast system that gives high availability at low cost. The impact of aircraft take-offs and landings can easily be followed on-line. The OPSIS system can also monitor fugitive emissions from other sources at the airport.

Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

Measurement of formaldehyde in ambient air for monitoring workplace exposure limits

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Formaldehyde Analyzer provides direct measurement of Formaldehyde in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Formaldehyde Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Formaldehyde and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Formaldehyde is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Measurement of acrylonitrile in ambient air for monitoring workplace exposure limits

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Acrylonitrile Analyzer provides direct measurement of Acrylonitrile in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Acrylonitrile Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Acrylonitrile and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Acrylonitrile is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Ambient air and emissions monitoring of Polycyclic Aromatic Hydrocarbons – airmoC10-C20+

by Chromatotec Group     based in Val de Virvée, FRANCE

Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants.

Ambient air monitoring by FID detection – airmoVOC BTEX

by Chromatotec Group     based in Val de Virvée, FRANCE

Urban pollution is a problem that concerns more and more people in charge of public health. In large cities, car emissions are an important source of atmospheric pollution. This problem is growing as the traffic keeps on increasing. BTEX compounds are present in car emissions. It is therefore important to be able to analyze them with short analysis cycle duration and on a continuous and automatic way.

Open Path Ambient Air Quality Monitoring

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring.

Measurement solution for ambient air workplace monitoring

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea can supply fixed workplace monitoring systems that can measure single or multi-points about the workplace. Specifically designed analytical systems can ensure detection limits down to ppb levels can be achieved for multiple gases with a single instrument. Controlling software can run automatically, providing instantaneous or time-weighted average readings.

Measurement solution for accurate continuous formaldehyde measurement formaldehyde in emissions and ambient air applications

by Protea Limited     based in Middlewich, UNITED KINGDOM

Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human health.

Ambient Monitor Gas Calibration with Ozone Generators

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Environics® Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency requirements.

Measurement of naphthalene in ambient air to monitor workplace exposure limits & at remediation & Superfund sites

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Naphthalene Analyzer provides direct measurement of Naphthalene in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits and at remediation and Superfund sites. The Series 8900 Naphthalene Analyzer employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Naphthalene and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Naphthalene is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

Urban air quality monitoring

by Opsis AB     based in Furulund, SWEDEN

To measure air quality in the ambient air is a challenge. The monitoring site needs to be representative and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability.

Air monitoring equipments for outdoor & indoor air quality

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

Gradko’s ambient air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range.

Measurement of methane and non-methane hydrocarbons for environmental air quality.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane hydrocarbons that are of primary concern.

Need help finding the right suppliers?

Let the XPRTs do the work for you