Only show results available in Virginia? Ok

analytical spectroscopy Applications

  • Premium

    Analytical instruments for atomic spectroscopy

    Besides Mass Spectrometry, a further variety of analysis techniques are categorized as atomic spectroscopy. Analysis techniques which use inductively coupled plasma (ICP), such as ICP-OES and ICP-MS, are among these. With increasing environmental awareness backed by regulations, an increasingly important use of atomic spectroscopy techniques is in mercury analysis. Achieving a high mass flow control performance, e.g. high repeatability or an excellent turn-down ratio, is a prerequisite to achieve a high analyzer performance. For this, a number of Axetris customers rely on our products while designing such systems.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Mass flow devices for analytical instrumentation

    Axetris mass flow devices are used in a variety of analytical applications: Gas Chromatography, Mass Spectrometry, Atomic Spectroscopy, Elemental Analysis, Thermal Analysis, Bioreactor and Fermentor.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Analytical instruments for mass spectrometry

    A variety of MS techniques – such as Quadrupole MS, Time-of-Flight (TOF) MS, Ion Mobility Spectroscopy (IMS), etc. have been developed in the past decades, providing new tools for materials analyses. Flow control for mass spectrometry (MS) requires high repeatability and small temperature- and pressure dependency. This is important to achieve a high resolution and instrument resolution. Depending on the size and electrical interface requirements, the Axetris MFC modules or MFC standalone types are the ideal choices for MS applications.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Rapid Analysis of Mining Samples Using Laser Induced Breakdown Spectroscopy (LIBS)

    Laser-induced breakdown spectroscopy (LIBS) offers many attractive analytical advantages with respect to other techniques for the mining industry. LIBS can detect elements from H – Pu, which includes non-metals, such as H, N, F, and O, along with high sensitivity for lighter elements (B, Li, C, K, Ca, Mg, Al, Si, etc.) Please see our website to request this application note: appliedspectra.com

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Premium

    DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical solution for EN 14078:2014 implementation using FTIR spectrometer InfraLUM FT-08 and powerful SpectraLUM software package. The method is based on measuring the transmission spectra of a sample of diesel fuel in the mid-IR spectral range. Consequent calculation of the FAME concentration is performed by InfraLUM software automatically by comparison of peak height against a calibration curve.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Percent Aromatics in Gasoline #3008

    The aromatic content of gasoline determines many of its combustion properties. Since it also impacts the environmental characteristics of the fuel it is desirable to have accurate measurements of this parameter. The traditional analytical method for measuring aromatics is either gas chromatography (GC) or an older method entitled fluorescent indicator adsorption (FIA), both of which are time and labor intensive. This note will discuss the use of Guided Wave hardware and software tools for the measurement of % aromatics in fuel products using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR can be applied in real time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods. Request Application Note #3008

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you