Only show results available in Virginia? Ok

analytical system Applications

  • Premium

    Laboratory Analytical - pH-Measurement Application

    The right System for the right Application. By choosing the right electrode, instrument and accessories customers can build a dedicated system for their application. A system capable of giving accurate and repeatable results time after time.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Flow meters for analytical flow solutions

    Gas mass flow controllers are widely used in gas chromatographs in order to control carrier gases and to precision purge these instruments. Our instruments also find use in custom gas mixing and blending systems for environmental research.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Process instrumentation and analytics solutions for engineering

    Siemens brings a wealth of engineering expertise together with expansive portfolio of products and services.  We offer a broad array of offerings such as Front-End Engineering Design (FEED), System Integration, Process optimization and training.  Leverage Siemens` know-how to meet your process control challenges.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • OneRainware™ - Radar rainfall for real-time and analytical applications.

    Accurate estimation of the spatial distribution of rainfall is critical to successfully model hydrologic processes. OneRain has worked with engineering firms and those with responsibilities in Stormwater and Wastewater Management across the U.S. to provide radar rainfall data to help characterize storm events or flow problems in collection systems and as a basis for both real-time and design-oriented modeling. OneRainware products and services offer: *Real-time gauge-adjusted radar rainfall (GARR) data *Real-time area-average rainfall *Real-time forecast rainfall *End-of-month archive quality gauge-adjusted radar rainfall data *Historical and post-event analysis using archived rainfall estimates *Web-delivered calibrated radar-rainfall data *StormProperties™ Analysis. GARR data are used in flood warning, runoff modeling, basin modeling, I/I studies, litigation, real-time control, design storms, and National Pollutant Discharge Elimination System (NPDES) compliance activities.

    By OneRain Incorporated based in Longmont, COLORADO (USA).

  • Premium

    Process instrumentation and analytics solutions for water and wastewater industry

    As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Process instrumentation and analytics solutions for HVAC-R industry

    Siemens is a trusted partner for single-source solutions that bring your Heating, Ventilation, air conditioning and refrigeration systems (HVAC/R) installations to a whole new level of energy efficiency. From cogeneration energy production, district heating and cooling systems to compressed air and steam applications, we maximize your energy conservation and optimize the cost effectiveness of every process.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Analytical and measuring instruments of chemical and petrochemical

    In the chemical field, ICP-AES is used for a broad range of analysis in order to manage trace amounts of hazardous metals in the manufacturing process, manage additive elements essential to the functionality of a product, and manage the environment of the entire factory. Therefore, it is desirable to have a robust, highly stable system able to reliably accept the injection of a broad variety of samples, regardless of the type of solvent (aqueous/organic) or the presence of matrices. It is also important to simplify processes and reduce costs, which enhances the productivity of daily quality control work.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Substitute fuel sampling system

    A critical eye for every sample! Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Chromatography systems for food industries

    Food samples exhibit a challenge to analytical chemists to determine pesticide residues to meet food safety regulations in USA and EU. Therefore, more careful sample preparation is needed to successfully identify and quantify these compounds in food. Dikma offers SPE columns with different absorbent phases and QuEChERS method for sample pre-treament.

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA).

  • Chromatography systems for environmental monitoring

    With the growth of contamination generated from agricultural and industrial production, it causes a threat to the enviroment including drinking water, atmosphere and soil. The chemists have always seeked out the effective analytical methods to detect and identify chemical contaminants. Dikma provides innovative products and application solutions according to government regulations and industry standards, for air and water quality monitoring, gas detection.

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B Performance Specification 15. Gasmet™ Gas Analyzers and Calcmet™ software have been designed to take the requirements of the performance specification into account.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is constructed of glass and stainless steel. The calibration standard is injected by a syringe through a replaceable septum in the center of the injection glassware, which is heated. After enough time has elapsed, typically less than five minutes, the tube is removed from the ATIS and analyzed using the appropriate analytical technique for that adsorbent tube.

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

  • Premium

    Flow meters for the general research flow solutions

    Our instruments are widely used by original equipment manufacturers of gas chromatographs, mixing and blending systems and other pieces of analytical equipment. The mulitple gas capability and wide choice of flow controlllers-for high pressure, very low flows and corrosive gases-offer customers excellent application flexibility.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically monitored include; EtO Sources - gas storage areas, sterilizer doors, aeration doors, and the General Work Area - decontamination, packaging and preparation and sterile product storage areas.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    EDXRF spectrometers for food & beverage industry

    The Food & Beverage industry is a wide-scale and versatile industry, which is enforced by strict standards and regulations that makes it an ideal potential for the ED-XRF analytical systems. Using ED-XRF allows measuring a wide range of elements C (6)-Fm (100), at different concentration in almost all matrices - solids, powders and liquids.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Water Analyzing for the Mining Industry

    As a primary industry, the mining industry faces the needs for optimizing the management of its resources. Exploration and excavation activities should be as efficient as possible. Companies also aim to maintain water resources while at the same time controlling the environmental impact of their activities. As pioneers in exotic mining analytics, AppliTek can help you with a selection of application-oriented analyzers, from portable XRF systems to on-line analyzers for water and process applications.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Analyse Impurities in many Matrix Gases

    AGC Instruments provide the complete analytical solutions to analyse impurities in many Matrix Gases. With a wide range of successful installations world wide, we can design a system that will meet your exact needs and guarantee top class performance.

    By AGC Instruments Ltd. based in Shannon, IRELAND.

  • Measurement solution for ambient air workplace monitoring

    Protea can supply fixed workplace monitoring systems that can measure single or multi-points about the workplace. Specifically designed analytical systems can ensure detection limits down to ppb levels can be achieved for multiple gases with a single instrument. Controlling software can run automatically, providing instantaneous or time-weighted average readings.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Measurement solution for CFC analyser

    CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to abatement systems can be monitored using the one analyser.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Catalysis

    Hiden's modular CATLAB offers a wide range of experimental tools for catalyst researchers, from rapid dynamic screening to fully automated precise investigations of active surface chemistry & optimisation of catalytic activity. The CATLAB performs analysis using temperature programmed methods such as TPR/TPO/TPD. Pulse chemisorption is also available with the CATLAB-PCS. The integrated QGA mass spectrometer system provides for quantification of the adsorbed/desorbed species. Physical analyses such as metal surface area, catalyst dispersion and surface acidity/basicity are provided. All CATLAB & mass spectrometer sampling wetted surfaces are designed to have the widest possible compatibility for use with aggressive species. Hiden Analytical’s HPR-20 QIC mass spectrometer is available for coupling to existing catalyst reactors with integral analysis software available for TPD/TPR/TPO quantification. A range of specialized connectors & couplings optimise integration with reactor vessel

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you