Only show results in Connecticut? Ok

anesthetic gas monitoring Applications

  • Premium

    Gas monitoring instruments and systems for anesthetic gases

    The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane,...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Gas analysis & monitoring systems for medical gases monitoring

    The measurement of occupational exposure to pollutants in the operating room is an essential tool for the detection of chemical, linked not only to the occurrence of infections and various diseases, but also to reduced alertness and performance of staff. To meet the above requirements, ETG proposes the use of ‘INFRARUN, thanks to the high sensitivity and stability and the very wide dynamic range, INFRARUN is the ideal tool to make a continuous sampling in the short and long-term gaseous contaminants in the...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Environmental protection

    Laser Gas measurements Flue gas emissions, HCl, HF, CO, CO2, O2, NH3, NO, NO2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Gas analyzers and monitoring systems for Container monitoring

    Cargo containers and wooden packing materials are fumigated to control the spread of pests and micro-organisms. However, fumigant gases are toxic and present a danger to human health even at low concentrations. Additionally, products shipped in containers may release VOCs from the solvents, coatings and glues used in manufacturing processes, and the concentrations of these vapors may be significant in the confined space of the container. Gas measurements are required to protect the health of any workers involved...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Air quality and industrial gas monitoring systems for Semiconductor

    Production of semiconductor materials require extremely clean air supply that help ensure the quality of the materials being manufactured as well as specialized gases to enable production to occur smoothly and efficiently. Teledyne API carries a complete line of Industrial gas process instruments including those that both produce and measure gases in these unique applications. Teledyne API also provides specialty gas instruments designed to help reduce or eliminate Airborne Molecular Contamination (AMC) in the...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Flue gas heavy metals on-line continuous monitoring solutions

    According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, etc.

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Stack emissions monitoring

    Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone instruments.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for medical gas monitoring

    Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Gas analyzers and monitoring systems for Compliance measurements

    Continuous Monitoring Required; Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Portable and fixed gas analysers for CO2 monitoring

    Monitoring industrial processes, CO2 gas quality control and indoor air quality can all be achieved using Geotech`s wide ranging CO2 analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Gas monitoring and dust monitoring

    Laser gas instruments Pulverized coal bunker, Exit of preheater, Main emission chimney, Cooler,exhaust emission chimney, O2, CO, CO2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Gas analyzers and monitoring systems for Raw gas measurements

    Real-time and Accurate Process Data; Process measurements are a standard tool in following different process variables and gaining important knowledge about your process. With real-time and accurate process data, understanding your process in detail becomes easier and quality of process control increases.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Metallurgical industry online monitoring solutions

    Poorly controlled the concentration of gases such as CO, CO2, CH4 in the metallurgical industry cause poisoning, explosions and other accidents, and pose a serious threat to the safety in production. So it is essential to check the content of these gases for energy conservation, increase productivity, reduce energy consumption and protect the safety of life and product. The company`s gas analysis technology can accurately and reliably measure various industrial gas content, to provide a complete.

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Volumetric flow meters for water treatment facility support

    Maintaining the health of your water treatment facility requires instrumentation you can rely on. Sierra offers turnkey solutions for a variety of gas, liquid, and steam applications. From tracking and allocating natural gas, to measuring compressed air, to aeration basins and digester gas measurements, our thermal mass flow meters are ideal: high turndown, direct mass flow and the highest accuracy in the market—+/- 0.75% of reading.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Online Gas monitoring

    Laser Gas analyzer Technical control of CO, CO2 , 0-100%/0-50% Safety Supervision of O2, 0-5%/0-21% Explosion-proof The front/back of recycling forced-draught fan The front/back of gasometer

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you