area monitor Applications in Australasia

Premium

Gas monitoring instruments and systems for confined space monitoring sector

employees’ health and safety. Gasmet gives you peace of mind with a solution for confined space monitoring that simultaneously measures more than 50 hazardous gases with extremely low detection ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Emissions Monitoring for Tunnels

The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Continuous emissions monitoring for aluminium smelters

Process control and emissions monitoring in an aluminium smelter is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Process monitoring solutions for O2 oxygen monitoring

OPSIS EEx Zone 1 and 2 certified monitoring equipment meets the demands for monitoring in harsh areas with a high amount of corrosive gaseous compounds. OPSIS offers two monitoring solutions, TDL (Tuneable Laser Diode) technology with ER060L-EEx emitter and receiver set, for harsh installations, and OPSIS O2000 ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Flowing Waters - Flood Protection solutions for Seepage Measurement in Dam

Application: Dam wall 130 years old, approx. 500 m length, made of quarry stone with clay core. Gallery inside of dam wall to check seepage volumes. Seepage volumes ranging from ml/s to l/s. Currently seepage water volumes are manually determined once per ...

By NIVUS GmbH Distributor in Whitianga, NEW ZEALAND.

Premium

Hazardous Gas Monitoring throughout the Semiconductor Manufacturing Facility

Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous ...

By Control Instruments Corporation (CIC) Distributor in Nottinghill, AUSTRALIA.

Premium

Gas detection analyzers solutions for storage industry

material into the surrounding ...

By Control Instruments Corporation (CIC) Distributor in Nottinghill, AUSTRALIA.

Premium

Air pollution, emission and process monitoring systems for agriculture

Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key ...

By ENVEA Distributor in Arndell Park, AUSTRALIA.

Industrial monitoring solutions for the dust collectors areas

Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Industrial monitoring solutions for the gas analysers areas

Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Perimeter Monitoring and Area Monitoring

GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed ...

By Boreal Laser Inc. Distributor in AUSTRALIA.

Industrial monitoring solutions for the de-NOx plants areas

to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow the effectiveness of the reduction process to be assessed. It may also be beneficial to monitor NH3 slippage at this ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Industrial monitoring solutions for the flue gas desulphurisation areas

Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Industrial monitoring solutions for the dust monitors areas

For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Industrial monitoring solutions for the flow monitoring areas

Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Industrial monitoring solutions for the opacity and dust monitoring areas

There is a requirement for many small boiler operators to monitor Opacity to determine the smoke density emitted from the boiler. On small boilers we recommend the DCEM 1001 Opacity monitor; this simple, low cost monitor has high efficiency air purges use compressed air to ensure that optical surfaces are ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Fire detection solutions for the oil rigs areas

The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

Tunnel solutions for the visibility monitor areas

The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor ...

By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

High quality detection solutions for environment industry

People living in towns near plants worry about air quality. AIRSENSE offers the ability to monitor large areas and thus help you make the right decisions. Other applications in the environmental and laboratory sectors include food supervision, quality assurance and odor ...

By AIRSENSE Analytics GmbH Distributor in Melbourne, AUSTRALIA.

Sound level meters & Noise dosimeters for Environmental noise monitoring industry

Environmental Noise is one of the fastest growing areas of noise monitoring, mapping and control. The EU has introduced a number of Directives aimed at increasing the level of information about Environmental Noise across the EU. In 1996, data from the EU Green Paper on Future Noise Policy estimated that around ...

By Cirrus Research plc Distributor in AUSTRALIA.