area monitor Applications in Canada

Premium

SF6 Leak Detection

Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the ...

By Advanced Energy Industries, Inc. Distributor in ONTARIO (CANADA).

Premium

Gas monitoring instruments and systems for confined space monitoring sector

employees’ health and safety. Gasmet gives you peace of mind with a solution for confined space monitoring that simultaneously measures more than 50 hazardous gases with extremely low detection ...

By Gasmet Technologies Oy Office in Mississauga, ONTARIO (CANADA).

Premium

Visual inspection solutions for the aviation industries

The role of quality assurance in aerospace manufacture is becoming increasingly important. These inspections require the use of borescopes allowing engineers to properly and thoroughly assess different units of an aircraft: Turbines and engines, combustion chambers, low/high pressure compressors, wings, foils, cells ...

By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Premium

Flowing Waters - Flood Protection solutions for Seepage Measurement in Dam

Application: Dam wall 130 years old, approx. 500 m length, made of quarry stone with clay core. Gallery inside of dam wall to check seepage volumes. Seepage volumes ranging from ml/s to l/s. Currently seepage water volumes are manually determined once per ...

By NIVUS GmbH Distributor in Mississauga, ONTARIO (CANADA).

Premium

Continuous emissions monitoring for aluminium smelters

Process control and emissions monitoring in an aluminium smelter is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...

By OPSIS AB Distributor in Mississauga, ONTARIO (CANADA).

Premium

Visual inspection solutions for the borescopes for military and law enforcement

locked doors, be inserted into holes to see through walls, ceilings or floors. This allows tactical teams to monitor actions in places they don’t have access to, minimizing the danger in and allowing them to collect data before entering a room or opening a ...

By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Premium

Gas detection analyzers solutions for storage industry

material into the surrounding ...

By Control Instruments Corporation (CIC) Distributor in Winnipeg, MANITOBA (CANADA).

Premium

Emissions Monitoring for Tunnels

The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among ...

By OPSIS AB Distributor in Mississauga, ONTARIO (CANADA).

Premium

Air pollution, emission and process monitoring systems for agriculture

Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key ...

By ENVEA Distributor in Toronto, ONTARIO (CANADA).

Premium

Visual inspection solutions for the borescopes for turbine and turbine components inspection

Turbines and generators are important pieces of machinery that need to be properly maintained and repaired to ensure maximum service life and safety. Non destructive remote visual inspection of turbines with a video borescope is a cost effective and efficient way to inspect without having to disassemble a turbine. Steam and gas turbines run at extremely high pressures, and they need to be kept in good mechanical shape to efficiently do their jobs. Not only is efficiency a concern, no one wants to learn there is a ...

By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Premium

Hazardous Gas Monitoring throughout the Semiconductor Manufacturing Facility

Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous ...

By Control Instruments Corporation (CIC) Distributor in Winnipeg, MANITOBA (CANADA).

Premium

Process monitoring solutions for O2 oxygen monitoring

OPSIS EEx Zone 1 and 2 certified monitoring equipment meets the demands for monitoring in harsh areas with a high amount of corrosive gaseous compounds. OPSIS offers two monitoring solutions, TDL (Tuneable Laser Diode) technology with ER060L-EEx emitter and receiver set, for harsh installations, and OPSIS O2000 ...

By OPSIS AB Distributor in Mississauga, ONTARIO (CANADA).

Wireless monitoring in EX areas

The DX 99 battery operated remote IO unit allows to monitor sensors situated in EX areas (zone 0 and 20) whithout the need for costly and complicated cable runs. Thanks to elaborate power management, the radio unit can power the sensor from the battery (up to 19V for a warm up time of 1 ...

By Banner Engineering Corp. Distributor in Toronto, ONTARIO (CANADA).

Industrial monitoring solutions for the dust collectors areas

Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric ...

By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.

Industrial monitoring solutions for the gas analysers areas

Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these ...

By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.

Perimeter Monitoring and Area Monitoring

GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed ...

By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

Industrial monitoring solutions for the de-NOx plants areas

to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow the effectiveness of the reduction process to be assessed. It may also be beneficial to monitor NH3 slippage at this ...

By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.

Industrial monitoring solutions for the flue gas desulphurisation areas

Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much ...

By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.

Industrial monitoring solutions for the dust monitors areas

For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The ...

By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.

Industrial monitoring solutions for the flow monitoring areas

Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, ...

By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.