CODEL`s road tunnel monitors are designed exclusively for road tunnel applications. It offers a family of tunnel sensors that provide all the essential measurements necessary to monitor the tunnel atmosphere.
Some of the hundreds of locations where you`ll find Micro Pulse LiDAR instruments at work. A rooftop at NASA Goddard Space Flight Center a Himalayan base camp the sky over the Sierra Nevadas the deck of an icebreaker in the fleet of the Korean Polar Research Institute the Port of Newcastle, Australia Bariloche Airport in Argentina.
VOCS are volatile organic compounds, according to their chemical structure it can be divided into alkanes, aromatic hydrocarbons, esters, aldehydes, etc. The most common type of gas composition are benzene, toluene, xylene, styrene, trichloroethylene, chloroform, trichloroethane, diisocyanate (TDI), two different cyanide methyl ester, etc. the gas is discharged in industries such as the spray paint, petrochemical, chemical, shoes, printing, electronics, clothing dry cleaning, oil, construction, etc. VOCS has big...
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane C2F6.
HI-Q Environmental Product Company provides air sampling instrumentation & systems for several niche applications in a number of disciplines in the broad area of `Life Sciences`. In the Biomedical, Chemical, & Pharmaceutical industries, HI-Q has marketed instrumentation for certain applications for many years. Our ambient, in-door breathing level air samplers, commonly known in the industry as `Goose-Neck` or `Giraffe` air samplers have been instrumental in analyzing workplace exposure. HI-Q has also...
In some countries they do not allow tunnel atmosphere monitors to be mounted on the tunnel wall; also, where there is a single bore it is very difficult to gain access for maintenance purposes. The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. This allows maintenance to take place without affecting tunnel traffic flow.
Since beginning operations in 2002, Raymetrics core clients has been the atmospheric research community. The company has since maintained close ties with academia over the years in order to continue developing high-innovation products suitable for top quality research.
Oil wells almost always produce natural gas (“associated gas”) along with the petroleum. In many cases, it is uneconomical to process due to heavy contamination. As a consequence, this gas is combusted, “flared” or simply vented as-is during upset conditions in the process. Newly updated EPA regulations like 40 CFR Part 60 Subpart OOOO (also known as Quad O) as well as the new RSR MACT rule for refineries, requires oil & gas companies to report the flare gas emitted to our atmosphere....
With the application of air quality PM2.5 standards, people have a clear understanding and attention on ambient air quality, countries also present clear requirements and control objectives. Due to the speeding up of development process of cities construction in recent years, unceasing expands of the urban area and population scale, sustained growth of energy demand, motor vehicle ownership, various construction projects, the situation of urban air quality improvement work is more severe.
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic product.
Syngas or synthesis gas is produced from the gasification, reforming or pyrolysis of carbon-based materials. These include; coal, biomass, plastics or other domestic waste. During production, these materials are subjected to high temperatures under a controlled atmosphere. The synthetic gas that is produced is rich in carbon monoxide and hydrogen, with small amounts of carbon dioxide and methane present. It can be used in the production of chemicals or as a fuel source. Due to syngas being produced from waste...
The Environnement S.A Laser Gas Monitor Extractive version can monitor trace level gas concentrations (ppb resolution) at 1 Hz or faster. The LAS 300 RK is designed to deliver high performance in applications where rapid, accurate measurements are essential; CEMS, process control, atmospheric and environmental monitoring, and the protection of personnel.
A large pharmaceutical plant runs a Thermal Oxidiser on plant to incinerate their solvent-containing gas streams before emission. When the oxidiser is offline, then the plant must monitor the release of solvent to the atmosphere. A ProtIR 204C fixed monitoring system was installed that continually measures 24 plant solvents, including Acetone, Cyclohexane, DCM, DMF, IPA, MIBK, Toluene and THF. Given the high levels that are possible, the system has an active dilution system, reducing the concentration of the...
The radiello ammonia sampler impregnated with phosphoric acid represents a low-cost, reliable and simple tool for assessing the atmospheric deposition of ammonia at parts per billion (ppb) concentration levels.
SoDAR provides critical information on several fronts for airports as well. This information is both weather related and plane related. Since lives are at risk, timeliness of information is of the utmost importance.
Carbon dioxide has a wide range of commercial uses, from the production of lasers to the carbonation of soft drinks. This gas has become a topic of interest because it is classified among the greenhouse gases, gases which impact the Earth's environment when they reach high concentrations in the atmosphere.
We propose solutions for medical diagnostics (out-breath control) and for ecological monitoring (control of carbon dioxide, exhaust gases in the atmosphere).
According to US EPA IO - 3.3 standard method of heavy metals, PMMS – 5000 uses XRF nondestructive testing technology and atmospheric automatic enrichment technology to realize the accurate measurement of atmosphere heavy metals such as lead, mercury, cadmium, chromium, arsenic, etc. It is widely used in environmental air quality monitoring places such as industrial pollution area, residential area, city, etc.
The principle cause of regional and urban haze, or visibility impairment, is light extinction caused by fine particles, sulfates, organic and elemental carbon, nitrates and crustal matter. Particles between 0.1 and one micrometers in size are most effective at scattering light, in addition to being of greatest concern for human health.
The TunnelTech 200 series are primarily gas monitors with optional Visibility capability. Most use Infra-red absorption technology to monitor gaseous pollutants and those with a visibility channel use optical attenuation for that application. All TunnelTech 200 analysers except the TunnelTech 205 use the same rugged corrosion resistant enclosures and have an optional Data Display unit. As there is only one moving part so reliability levels are very high and maintenance levels very low.