The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis.
The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determine...
Digital Pathology is an image-based information environment enabled by virtual microscopy. This involves imaging glass slides and saving and distributing their digital images for analysis, archiving and storage.
The virtual microscopy slides are:
•Scanned — using a microscope based scanning device that takes images of the whole slide via large scanning or stitching of smaller scans. This involves a motorized stage to scan the whole slide. Light source stability is important for scanning in order to prevent...
The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet...
Protea can supply fixed workplace monitoring systems that can measure single or multi-points about the workplace. Specifically designed analytical systems can ensure detection limits down to ppb levels can be achieved for multiple gases with a single instrument. Controlling software can run automatically, providing instantaneous or time-weighted average readings.
The purpose of determining ethylene in the chlorination process is to minimize ethylene losses by feedback control of C2H4 / Cl2 ratio in the chlorination reactor. The on-line analyzer system uses selective C2H4 measurement by means of multi-wavelength infrared with automatic optical span possibility. For all other analytical solutions in the chlorination process.
OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH...
The recorded death of fish in the river that flows out of the industrial zone of Scarlino has created the need of the installation of a biological alarm system. The decision was made to work with an automatic system, iTOXcontrol created by microLAN-The Netherlands represented in Italy by Ecotox Lds, which uses marine bacteria. The system compares the values of the light emission from these organisms at the entrance and exit of the canal, generating alarms in the presence of toxic substances.
ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a...
From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these measurements.
Determining levels of CO and CO2 and their respective ratio in the oxychlorination reactor contributes to overall process efficiency. The on-line analyzer system uses a selective CO/CO2 measurement by means of multi-wavelength infrared with automatic optical span possibility.
Urban pollution is a problem that concerns more and more people in charge of public health. In large cities, car emissions are an important source of atmospheric pollution. This problem is growing as the traffic keeps on increasing. BTEX compounds are present in car emissions. It is therefore important to be able to analyze them with short analysis cycle duration and on a continuous and automatic way.
The purpose of determining ethylene in the oxychlorination process is to minimize ethylene losses by feedback control of C2H4 / Cl2 ratio in the oxychlorination reactor. The on-line analyzer system uses a selective C2H4 measurement by means of multi-wavelength infrared with automatic optical span possibility.
■■ EMS, Taiwan ■■ Intelligence Electronic Water Meter:
- Class C Electronic Water Meter
- Woltmann Electronic Water Meter
- Multi-Jet Water Meter
- Vortex Flow Meter
- Magnetic Flow Meter
- Ultrasonic Flow Meter
- Gear Free
- Magnet - Free
- DMA (District Meter Areas) management
- NRW (Non-revenue water)
- AMR (Automatic Meter Reading)
- MNF Log (Minimum night flow)
- Monthly Water Consumption Log
- Water Leaking Detector
- Bi-Directional Flow Indicator
- ISO 4064:2005 / ISO 4064: 1993
Environics® Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency requirements.
Diffuse irradiance measurements: Diffuse Horizontal Irradiance measurements are performed with a thermopile sensor called Pyranometer mounted on a Sun tracker or shading ring. When the pyranometer is installed on an automatic sun tracker, the diffuse radiation can be measured in two different ways. Measuring Diffuse irradiance requires an accurate pyranometer with low offset properties. Duirng clear sky conditions the DHI irradiance (W/m2) is less than 20% of the total irradiance. Zero offsets lead to underestimat...
Weighing delicate tubular samples such as sticks, springs, tungsten wires or stents require highest weighing precision but unfortunately are difficult to handle. Our Automatic-S Microbalances are the best solution for weighing such delicate samples.
Simply connect one or multiple balances to the LabX balance PC software, define duration and frequency of your measurements and LabX takes care of automatic data collection. All weighings can be activated from the balance touch screen, executed according to your SOP and recorded automatically. LabX captures all data and stores it in a central SQL-database. From you office, you gain access to all data immediately and enjoy powerful data management functionalities. Data can also be exported manually or automatically...
Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment. Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations. Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and...
With predefined formulas or concentration tables the density meter converts the measured density value automatically into the desired concentration unit. The density meters from Mettler Toledo have already built in formulas and concentration tables for the most common applications.