Only show results available in Connecticut? Ok

benzene monitoring Applications

  • Premium

    Benzene Monitoring

    Cerex Monitoring Solutions manufactures UVDOAS analyzers for a variety of Benzene monitoring applications. As benzene specific single gas or multi-gas analyzers, our instruments are available with application specific detection ranges and fully configurable alarm functionality.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Moisture Monitoring for Liquid Benzene Feed Stock

    Moisture needs to be measured in feed stock gases in the manufacture of polymers . For example, pre-dried benzene is fed in to a reactor containing hydrochloric acid – if the dryers are not operating properly moisture in the benzene promotes acid corrosion of the reactor and process lines. Several processes require water concentrations of specific values to optimise efficiency and yield; in such cases more sophisticated instruments are required.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Premium

    Measurement of vinyl chloride, acetaldehyde, methanol, and benzene in CO2 applicaitons for gas manufacturer & food and beverage industry

    The BevAlert Model 8900 provides direct measurement of Vinyl Chloride, Acetaldehyde, Methanol, and Benzene (VCAMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • EPA 325 Benzene Fenceline monitoring

    EPA Method 325 Fenceline Monitoring Golden provides analytical products and services for compliance with fenceline monitoring requirements In addition to our analytical services to support source testing and other environmental projects, Golden Specialty, Inc. provides high quality analytical and consulting services and products to support our clients needs for compliance with the new EPA Method 325 fenceline monitoring requirements. We have been supporting clients with their EPA 325 needs since 2015 and are...

    By Golden Specialty, Inc. based in Friendswood, TEXAS (USA).

  • Premium

    Ambient air quality monitoring solutions for benzene fence-line monitoring

    To monitor benzene emissions can be a challenge, but OPSIS makes it easy. Benzene is an aromatic hydrocarbon liquid that evaporates quickly if exposed to ambient air. It is one of the most commonly used substances in the chemical industry and it is known to cause cancer. For this reason, refineries in the United States must start monitoring fugitive emissions of benzene from January 30, 2018. This is part of the 2015 U.S. EPA Petroleum Refinery rule. In case a yearly rolling average of benzene concentrations...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Industrial hygiene - personnel safety gas analyzers for industrial air monitoring

    Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration range,…).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Measurement of acetaldehyde, methanol, & benzene in CO2 applications for gas manufacturers & food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Methanol, and Benzene (AMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages. The BevAlert Model 8900 employs a photoionization detector (PID). The AMB in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of acetaldehyde, benzene, toluene, ethylbenzene, & xylenes in CO2 applications for food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Benzene, Toluene, Ethylbenzene, and Xylenes (ABTEX) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace volatile organic compounds in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    BTEX and VOC gas analyzers for ambient air monitoring

    This market is driven by law and legislations made in Europe and/or USA (US EPA). It deals with ambient air monitoring : analysis / calibration / automatic zero air in continuous 7 days a week. Ambient air monitoring: in France this service is controlled by associations that calculate the ATMO index. CHROMATOTEC instruments such as the BTX ,the Sulfur and the VOC analyzers can be a good complement of their analyzers such as O3, CO2, DUST… in the analysis of ambient air.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    BTEX in Ambient Air Application using a High-Sensitivity PID

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas analyzers for the food and beverage industry

    Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, mercaptans...).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Determination of benzene in gasoline

    Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Emissions Monitoring for Tunnels

    The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among others.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Emissions Monitoring for Airports

    Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution sources.

    By Opsis AB based in Furulund, SWEDEN.

  • Online benzene and BTEX analyzers solutions for emission of toxic hydrocarbons sector

    Gas chromatograph for monitoring of emissions from industry: toxic hydrocarbons in air, water and soil.

    By Synspec BV based in Groningen, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you