Only show results available in Connecticut? Ok

biocide water cooling Applications

  • Premium

    Water treatment solutions for cooling water treatment

    Efficiency is everything in the cooling water circuit. Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Chemical water solutions for the comfort cooling water sector

    AMSA BCP products keep comfort cooling water systems working efficiently. BCP 1000 and 2000 Series liquid products work within a complete chemical treatment program to maintain clean comfort cooling water systems that operate at peak cooling efficiency. Used in conjunction with a registered biocide, AMSA BCP chemistry controls microbial biofilms and minimizes the risk of the presence of pathogens in cooling systems.

    By AMSA, Inc. based in Auburn, MICHIGAN (USA).

  • Water treatment for cooling towers

    Controlling and preventing the growth of microorganisms in a cooling tower is extremely important and required to keep the system running at optimal levels. The presence of microorganisms will cause the system to breakdown and decreases the efficiency of the heat transfer. Typically oxidizing biocides such as chlorine and bromine have been used to treat cooling water. Unfortunately these chemicals are highly reactive with other chemicals and microbiological species found in the water. Chlorine dioxide however is...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Industrial solutions for cooling water contamination

    Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Chlorine dioxide for industrial water treatment

    Chlorine dioxide is used as a biocide in many industrial water treatment applications including cooling towers, process water and mill water. Its selective oxidative properties usually results in lower dosages of ClO2 while also achieving improved microbial performance.

    By DuPont Chlorine Dioxide based in North Kingstown,, RHODE ISLAND (USA).

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically...

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Environmental solutions for the iron and steel industry

    Precise and reliable evaporative gas cooling systems and air pollution control solutions for the iron and steel industry. Evaporative Gas Cooling and Conditioning: The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By...

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Chemical solutions for the legionella control areas

    Effective Legionella Control Requires an Effective Biofilm Control Program. AMSA BCP chemistry when used with an oxidizing biocide provides a Legionella Control Program. Outbreaks in Legionnaires’ Disease such as the one in the South Bronx in August 2015 highlights the importance of having an effective Legionella Control Program. Legionella bacteria grow in biofilms in building water systems, where they are protected from the disinfecting action of oxidizing and non-oxidizing biocides.

    By AMSA, Inc. based in Auburn, MICHIGAN (USA).

  • Premium

    Chemical Water Treatment for cooling and processing water

    Kurita offers a comprehensive line of products which prevent the formation of scale and fouling, provides corrosion protection and controls microbiological growth. The primary objective of all of Kurita cooling water treatment programs is to offer a comprehensive solution for the customer which maximizes the heat transfer of the system. Employing many of our unique technologies, your Kurita team will develop solutions which meet all performance requirements. Globally, Kurita continues to develop innovative and...

    By Kurita based in Tokyo, JAPAN.

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    UV fluorescence technology for Monitoring of phenol in water

    A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Chemical water solutions for the process cooling water sector

    Large or Small Process Cooling Water Applications are Perfect for AMSA BCP Chemistry. oth open loop and closed loop process industrial cooling systems will have cleaner surfaces, allowing more efficient heat exchange and cooling when AMSA BCP chemistry is included in the chemical treatment program.

    By AMSA, Inc. based in Auburn, MICHIGAN (USA).

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Ultraviolet water treatment for industrial water treatment

    Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing processes.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for machine tools industry

    HITEMA with its range of product solutions is able to grant an energy and water saving maintaining a precise an stable temperature control for the operations of welding machines, for precision machine tools, metal cleaning processes where the precise cutting oil and hydraulic fluid temperature permit high speed operations and low maintenance costs, it permits also to increase the productivity and the lifetime of the machining center.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Chemical water solutions for the BCP™ chemistry

    AMSA BCP™ chemistry brings numerous benefits to industrial water cooling systems.

    By AMSA, Inc. based in Auburn, MICHIGAN (USA).

  • Premium

    Water treatment solutions for industrial water & wastewater treatment industry

    Cooling tower. RO System. Biofilm, Air Scrubbers, Air Washers. Gas Scrubbers for H2S.

    By Jenfitch, LLC based in Walnut Creek, CALIFORNIA (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks....

    By econ industries services GmbH based in Starnberg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you