Only show results available in Virginia? Ok

biological monitoring Applications

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Oxygen Monitoring from Aerobic and Anaerobic for determination of biodegradation kinetics by respirometry

    Intrinsic kinetic tests involve adding relatively high concentrations of organic substrate to small concentration of acclimated microorganisms so that the COD/VSS ratio typically is greater than 10. Kinetic parameters are then determined by non-linear modeling using well-known relationships between biological growth and oxygen uptake.

    By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).

  • Premium

    Seawater Biotoxicity monitoring to protect the coastal waters of Italy

    The recorded death of fish in the river that flows out of the industrial zone of Scarlino has created the need of the installation of a biological alarm system. The decision was made to work with an automatic system, iTOXcontrol created by microLAN-The Netherlands represented in Italy by Ecotox Lds, which uses marine bacteria. The system compares the values of the light emission from these organisms at the entrance and exit of the canal, generating alarms in the presence of toxic substances.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Premium

    Air sampling & monitoring systems for fire & police service

    Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real.  Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Air sampling & monitoring systems for defense/military sector

    From portable hand held battery operated to rugged field deployable, military organizations worldwide rely of HI-Q air sampling systems & accessories during research, development, test and evaluation (RDT&E) and for reliable protection of personnel from Nuclear Biological Chemical Threats. HI-Q’s emergency response air sampling kits have offered the Defense & Military Industries a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Specialty Cleaners and Lubricants for Laboratory Industry

    We manufacture and supply high quality laboratory cleaners. Whether you need to remove biological debris, fingerprints, protein, starch, or dye, our products provide consistent results. Our laboratory cleaners are excellent for use on flasks, pipettes, slides, stainless steel, plastic, and other laboratory equipment and surfaces. When rinsed properly, our cleaners leave absolutely no residue. Validation information is available. For most applications a 0.5% - 2.0% solution is effective. Charlie Troxel, Product Manager at LI-COR Biosciences includes a sample of Micro-90 with each DNA sequencer the company ships: `We have found your Micro-90 Concentrated Cleaning Solution to be unsurpassed in removing gel debris and fluorescent residue from our sequencing plates. Since clean gel plates are so critical to high quality sequence data…we feel that introducing our customers to Micro-90 will help them maximize the performance of their DNA Sequencer.`

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Gas analysis & monitoring system for medical imaging

    The molecules can be deliberately labeled with stable isotopes, in one or more positions, and since they are minimally discriminated in metabolic processes, may be used as a tracer in chemical and biological studies.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for food traceability

    Recognition of raw materials: The analysis of stable isotopes is very important especially in studies of authenticity of the food. It, on the basis of different isotopic ratio, allows to recognize molecules, present in foods, having the same chemical structure but coming from different raw materials or processed by different processes, for example for biological synthesis or industrial.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Environmental Monitoring - Water Screening for Pollutants - Pesticide Screening

    Water screening for the detection of pollutants owning to large classes of chemical compounds such as triazine, fenylurea, diazine and phenolic pesticides can be performed. The presence of environmental pollutants can be determined utilizing biological materials such as photosynthetic biomediators (Plants, Algae, Cyanobacteria) and enzymes (e.g. Laccase or Tyrosinase). AMPBIO-ITO Light provides amperometric measurements performed on electro-active biological material suspended, deposited or grown on an Indium Tin Oxide (ITO) electrode, before and after the injection of the analyte under test. OPTICBIO-Multicell Survival optical is based on multicell arrays for biological material survival/storage and fluorescence measurement for the control of the physiological activity.

    By Biosensor based in Formello, ITALY.

  • Premium

    Water quality monitoring for food & beverage industry

    Wastes that are rich in starch such as those that occur in potato processing industries require a balanced addition of other macronutrients such as nitrogen and phosphorus. In order to optimize the dosing of these nutrients it is essential to have a good idea about the organic load entering the biological treatment reactor. Measurement of colour can help with quality control and flavour consistency.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Air sampling & monitoring systems for emergency response & first responsder`s team

    From portable hand held battery operated to rugged field deployable air sampling systems, Emergency Response and First Responder Team’s worldwide rely of HI-Q air sampling systems & accessories during emergency response situations for reliable protection of personnel from Nuclear Biological Chemical Threats. HI-Q’s emergency response air sampling kits have offered First Responders and other Emergency Response teams a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane hydrocarbons that are of primary concern.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • TOC Correlation to BOD or COD

    Challenge: Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) are traditional parameters analyzed in the laboratory to determine organic matter in water and wastewater. Wastewater facility operators need to have constant data to monitor their discharges and optimize treatment processes (biological treatment, chemical dosing, etc). The requirements of BOD and COD analysis prevent them from being implemented as control parameters, however. The BOD five-day analysis time requirement does not allow an operator to use the data for process optimization and. although COD requires less time than the BOD, its analysis includes the use of hazardous chemicals and has no constant analysis capability.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Integrated real-time gas analysis solution for chemical decontamination industry

    The threat of terror in the form of chemical and biological warfare agents has been a reality globally since March 1995, when the Aum Shinrikyo sect killed 12 people and injured nearly 6,000 by releasing sarin nerve gas in the Tokyo subway system. More recently, the 2001 anthrax attacks in the USA was a wake-up call that the threat is real. Recent outbreaks of H1N1 and SARS posed threats of worldwide epidemics because air travel provides a means for these diseases to spread globally in less than 24 hours. A major concern of several US government agencies, such as the Department of Defense, Homeland Security, and the Centers for Disease Control and Prevention is not only the detection of hazardous chemical and biological warfare agents (CBWA) or bacteria or viruses that pose an epidemic threat, but the timely decontamination of those agents to a level where they no longer pose a threat to human health and life. The solution requires a means to monitor the effectiveness of the decontaminating reactant or reactants to an endpoint that has been reliably shown to be more than 99% effective in rendering the targeted agents harmless under controlled conditions.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you