Only show results available in Virginia? Ok

biomass energy industry Applications

  • Premium

    Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

    By WEIMA based in Ilsfeld, GERMANY.

  • Waste shredding for the biomass industry

    Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Premium

    Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Methane, methanol, and ethanol are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Energy and Fuels from Wood Wastes and Biomass

    Wood wastes include woods from forestry, railways – sleepers, telecoms – telephone poles, timber manufacturing processes and the construction industry. Many of these types of wood tend to be contaminated with chemicals and other materials. This contamination can make the waste wood difficult to use in traditional biomass to energy processes and potentially hazardous to the environment. Our Gasplasma® energy from waste technology is able to transform efficiently the organic biomass into a pure, hydrogen-rich synthesis gas and safely destroys any harmful or hazardous inorganic chemicals. All inorganic materials are made inert and vitrified into an environmentally benign product called Plasmarok® which can be sold as an aggregate for construction, generating a revenue stream.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Premium

    Applications and Air Pollutants Removed in the Energy (Power) Industry

    Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Process design & engineering services for bio-energy industry

    Bio-fuel: A Bio-fuel is a fuel that contains energy from geologically recent carbon fixation. These fuels are produced from living organisms. Bio-fuels are made by a biomass conversion from a wide range of natural and organic resources which includes solid biomass, liquid fuel and biogases. Bio-fuels have increased in popularity because of rising oil prices and the need for energy security. The two main bio-fuels are ethanol and bio-diesel; both type of fuel causes less pollution as compared to conventional diesel- powered engines and have the same performance as a regular diesel fuel.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Dosing pumps for anaerobic disgestion and biogas industry

    Biogas is a natural gas also known as biofuel or biomass and is produced by breaking down organic material such as household waste, manure and crops grown specifically for biofuel with temperature-sensitive microbes and capturing the by-products.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you