Only show results in Virginia? Ok

boiler energy Applications

  • Premium

    Gas monitoring and dust monitoring for the boilers

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small space. The automatic zero pressure measurement is ideal to monitor flow or draft induction. With a pitot tube you can quickly measure velocity and determine mass flow even during long term testing. The Testo 350 makes reporting in lbs/hour easy!

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Measurement and control systems for the Boiler water monitoring

    In ongoing operation, the substances suspended in the boiler water are concentrated. In order to avoid the negative consequences (foaming, deposits) of excessive salt content in the boiler water, specified limit values must not be exceeded. With the aid of a desalination control valve, boiler water with concentrated content is constantly removed and replaced with clean water. If the limit values are exceeded, the conductivity limitation ensures prompt switching off of the burner(s). Foreign substances that have sunk to the bottom of the boiler are removed by briefly opening a drainage valve.

    By IGEMA GmbH based in Münster, GERMANY.

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be determined by the Ryznar or Langlier indices and correlated to a conductivity or TDS range. Most people recognize problems associated with corrosion. Effects from scale deposits, however, are equally important. For example, as little as 1/8` of scale can reduce the efficiency of a boiler by 18% or a cooling tower heat exchanger by 40%!

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Wood pellet stove, wood pellet boiler

    Ceramic igniter for wood pellet stove ignition

    By FKK Corporation based in Kyoto, JAPAN.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Pellet Classification for the Energy Industry

    Schenck Process provide systems that deal with wood pellets and chips feed solutions in the safest manner by using variable concepts and offering a range of conveying methods to deal with the differing feedstock characteristics. Alternative fuels are either discharged directly from trailers with “walking floors” or are delivered in tipping containers via road or rail. Schenck Process automated extraction screws, chain conveyor or pneumatic conveyors can be used to deliver the appropriate amount of fuel via a weighing check system for boiler feed regulation.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Reverse Osmosis for the power & energy industry

    Pure Aqua, Inc.’s core business is water treatment and has a number of products for the Power and Energy industry.  Whether that is condensate polishing, cooling water treatment systems, or boiler feed water treatment.  As a complete system integrator, Pure Aqua has a wide range of solutions for the varied sources of water and different types of contaminants associated with boiler feed water.

    By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Premium

    Industrial valves solutions for the energy industry

    Quality and reliability are the most important facts when plant engineers have to choose the components for power stations. Not matter if nuclear or fossil-fuelled, or when used in plants for renewable energy – shut-off and control valves by EBRO are first choice when quality and life cycle costing are the selection criteria. Different type series ensure that there is always a fitting solution for every application. If it is boiler feed water, condensate, cooling water or coolants – EBRO offers a reliable valve to fully meet the demands.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Biogas Treatment & Utilization

    ADI Systems offers treatment of biogas for H2S removal using both biological and chemical-based scrubber technologies. ADI Systems can provide biogas utilization packages in the following applications: Internal Combustion Engines Gen-sets Microturbines Fuel Cells Boiler and Steam Generating Systems Sludge Dryers Contact ADI Systems to learn how we can help your facility reclaim energy from waste.

    By ADI Systems based in Fredericton, NEW BRUNSWICK (CANADA).

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Premium

    Harden Shredding Technology for Pulper Ropes

    Harden Shredding Technology for Pulper RopesHarden Industries Ltd. designs and manufactures a variety of high-capacity shredding solutions specially suited for paper shredding and pulp mill materials processing. With Harden’s low-speed, high-torque technologies, pulp and paper mills are able to increase overall mill efficiency by reducing waste volume and lowering fuel, storage and transportation/disposal costs. Paper & Pulp Mill Materials Processed Rag rope Baled corrugated (old corrugated containers) or old newsprint. Pulper waste Paper rolls/fiber cores Wire Slabs Pallets Packaging materials (shrink wrap, banding, etc.) Scrap raw fibers and wood Typical Shredding Applications 1. Pre-Incineration Shredding Shredded paper is easier to handle and meter-feed into an incinerator and burns more thoroughly and rapidly. 2. Fuel Preparation Shred in-plant waste into cost-effective boiler fuel 3. Bale Breaking or Preprocessing Shredding bales prior to pulping delivers consistently sized

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Alternative Fuel Production

    Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most anything in between.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Continuous process waste tyre to oil recycling

    Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

  • Plastic bag to fuel oil machine

    Plastic bag is a most important source of plastic waste, which is called white trash. So we must come up with a method to recycle plastic waste to improve the environment. As a leader in the field of recycling plastic waste, Doing group has a special machine that aims at plastic bag recycling. This plastic bag recycling machine can produce fuel oil from waste plastic bags. The oil has many applications. It can be widely used as fuel oil in industries such as steel, iron and boiler factories, ceramics, power or chemical industries or hotels, restaurants etc. or used for generators to get electricity. It also can be refined to diesel by pyrolysis oil distillation plant, which can be used in the low speed engine, such as digging machine, road roller, loading machine etc. or sold directly at a higher price. The Plastic bag to fuel oil machine also has two other end- products, carbon black and a little combustible gas. Contact: Ms Bonnie www.wastetireoil.com Phone: +86 15893800169

  • Measurement and control systems for the Indicating the level - mechanically

    Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring station because of their special design and the intense LED illumination. With indirect level gauges, the water level is transmitted by a magnetic system to a display panel on the outside of a pipe.

    By IGEMA GmbH based in Münster, GERMANY.

  • Applications and Air Pollutants Removed in the Energy (Power) Industry

    Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Waste tyre pyrolysis plant cost

    How to convert waste tyres to useful resources? Now, it is no longer a problem. With 18 years' experience in the field of tyre pyrolysis, and continuous research, development and improvement, Doing group provides the latest waste tyre pyrolysis plant which has reached a high level in technology. The Waste tyre pyrolysis plant adopts the new green pyrolysis technology. Through the use of the tire pyrolysis oil plant, waste tyres can be effectively converted to fuel oil, carbon black and steel wire. The oil from tyres plant can be widely used as fuel oil in industries such as steel and iron and boiler factories, ceramics, power or chemical industries etc. And it can be used for generators to get electricity. Carbon black can be used for making construction bricks with clay, and also can be used as fuel. Steel wire can be recycled into smelting plant. Phone: +86 15893800169 Contact: Ms Bonnie www.wastetireoil.com Skype: bonniezhao2 Email: oilmachine@doinggroup.com

  • Moisture Monitoring for Nuclear Reactors

    The Advanced Gas Cooled Reactor uses carbon dioxide gas to transfer heat from the nuclear fission core to the water boiler for steam generation. The moisture content needs to be monitored to avoid corrosion damage, and continuous moisture monitoring acts as a boiler leak detector or bulk moisture meter.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you