Only show results in Connecticut? Ok

boiler water Applications

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the food & beverage industry

    The food and beverage industry is suffering from severe economic pressure. Efficient and continuous production processes are therefore business critical. By choosing Kurita concepts for your cooling water, boiler water and waste water plants as well as your reverse osmosis systems and autoclaves – all of which are specially adapted to your needs – you opt for economic and ecological treatment, leading to more productivity and cost-efficiency.

    By Kurita based in Tokyo, JAPAN.

  • Measurement and control systems for the Boiler water monitoring

    In ongoing operation, the substances suspended in the boiler water are concentrated. In order to avoid the negative consequences (foaming, deposits) of excessive salt content in the boiler water, specified limit values must not be exceeded. With the aid of a desalination control valve, boiler water with concentrated content is constantly removed and replaced with clean water. If the limit values are exceeded, the conductivity limitation ensures prompt switching off of the burner(s). Foreign substances that have...

    By IGEMA GmbH based in Münster, GERMANY.

  • Premium

    Hand-Held & process control water testing instrument for Boilers and cooling towers

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water treatment solutions for food and beverage industry

    Food and beverage processing companies have unique challenges requiring advanced food and beverage water treatment and wastewater treatment solutions. These challenges include optimizing water efficiency and meeting regulatory compliance standards. There are typically four main water processes involved in food and beverage processing. These processes are cooling water, process water, boiler feed water and process wastewater. The typical allocation of water used in each process varies by industry, from about...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation...

    By Kurita based in Tokyo, JAPAN.

  • Water and wastewater treatment solutions for boiler water sector

    Boiler rooms large and small, whether in industry, healthcare or housing: in any of them, unsuitable water can cause significant damage. We make sure that doesn’t happen.

    By Aquarex WATERPROFIT s.r.o. based in Uherské Hradište, CZECH REPUBLIC.

  • Industrial solutions for boiler feedwater impurities

    Problem: Poor water quality can result in significant operational problems and possible shut down of boiler systems. To limit the potential for scaling, deposition and corrosion, most boiler water is treated physically or chemically to remove impurities and improve efficiency in the system.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Water treatment solutions for the power generation industry

    Power generation industry is one of the greatest consumers of water, whether this is for cooling water applications or boiler feed (demineralized water). Lenntech can provide complete water treatment solutions in for the power generation industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Reverse Osmosis for the power & energy industry

    Pure Aqua, Inc.’s core business is water treatment and has a number of products for the Power and Energy industry. Whether that is condensate polishing, cooling water treatment systems, or boiler feed water treatment. As a complete system integrator, Pure Aqua has a wide range of solutions for the varied sources of water and different types of contaminants associated with boiler feed water.

    By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Advanced water purification technologies for power generation sector

    SnowPure provides EDI modules for power generation market, since 2002. Power plants around the globe utilize our Electropure electrodeionization (EDI) including plants in the United States, China, Europe, and the Middle East. With our high capacity EXL EDI product we are able to serve a greater share of the boiler feedwater high purity water market.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Gel type strong acid cation exchange resin for boiler water softener

    Strong acid cation exchange resin sodium form crosslinking 7% DVB styrene-DVB copolymer. Application:water softening Matrix:ST-DVB Type: Gel Functional group:sulphonic acid Appearance:amber Spherical beads

  • Premium

    Fibalon professional hotbox - Filtering of heating water in closed pipe systems

    FIBALON® tool has a highly durable special fiber. For the treatment of cooling lubricants, drilling fluids and abrasives, FIBALON® tool represents an innovative alternative compared to conventional systems such as cen-trifuges or belt filter systems. Heating water is water, which is located in a closed system. This flows through the boiler, where it is heated and finally reaches by means of pumps or gravity the radiator. The cooled heating water flows back to the boiler and the cycle begins again.The...

    By FIBALON GmbH based in Neumarkt/OPf., GERMANY.

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning...

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Premium

    Water treatment chemicals for the refinery and petrochemical industry

    Highly complex processes in refinery and petrochemical plants demand the competent handling of operational facilities and products. Water and process treatment also have to meet these requirements in order to ensure plant and system safety. Kurita offers you precisely this security: with decades of experience, we advise and support you in the various fields of application. Take advantage of our know-how and our customer proximity.

    By Kurita based in Tokyo, JAPAN.

  • Sialex for the OEMs Application

    Our products are installed on many industrial areas and in the private household.We have also experience with fluids other than water, which will receive more attention in the future. Sialex is a production process employed in the manufacture of a range of fluid treatment devices. The initial product Sialex®Ring is an “After-sales” device. It is added to existing products (water pipes, in front of heat exchangers, water boilers etc.). Our devices are installed after the original device has been...

    By Phoenix Ring Manufaktur UG based in Erbach, GERMANY.

  • Premium

    Water treatment chemicals for the automotive industry

    Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the chemical and pharmaceutical industry

    Resource consumption in the chemical industry is enormous. Although the industry has already succeeded in significantly reducing its energy demands, it remains challenged by high energy costs, high water consumption and increasingly stringent regulations. Energy efficiency, increased production and plant availability are therefore important factors contributing to a competitive advantage. We would be glad to support you. Kurita offers a broad spectrum of resource-saving solutions as well as solutions for improving...

    By Kurita based in Tokyo, JAPAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you