Only show results available in Connecticut? Ok

breath carbon monoxide monitor Applications

  • Premium

    Gas monitoring instruments and systems for compressed breathing air

    Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas analyzers and monitoring systems for Aluminum production

    Gas Emissions to the Atmosphere; Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions to the atmosphere.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Carbon Monoxide (CO) monitoring

    Carbon monoxide poisoning is the most common type of fatal poisoning in many industrialized countries. Carbon monoxide is a colourless, odorless and tasteless gas caused by the incomplete combustion of hydrocarbon fuels. Carbon monoxide is a toxic gas to the human body, when inhaled it binds to hemoglobin, myoglobin, and mitochondrial cytochrome oxidase reducing oxygen storage, transport and respiration in these organelles.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Steelmaking process monitoring by Direct MS

    Steel, an alloy of iron and carbon (up to 2% of weight), is one of the most widely used construction materials. It is produced by Basic Oxygen Steelmaking (BOS) in a converter : oxygen is blown to form carbon monoxide (CO) and carbon dioxide (CO2) with the carbon excess of molten pig iron. Other chemical elements (such as nitrogen) that may decrease the efficiency of furnace are also removed. Finally, oxygen is replaced by an inert gas (Ar) to minimize the oxidation.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Gas detection solutions for the breathing air gas sensors industry

    If you use compressed breathing air it is essential to monitor for contaminants including carbon monoxide (CO), carbon dioxide (CO2) and volatile organic compounds (VOCs) as well as oil mist and water vapour. Some people spot-check their compressed air quarterly using colorimetric tubes, but it is safer to test the air continuously. If you are operating or servicing equipment containing fluorinated greenhouse gas (F gas) in refrigeration, air conditioning and fire protection systems you need to adhere to requireme...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic gas is a mixture of carbon monoxide, carbon dioxide, methane and other gases that is required for hardening or carburising of steel. By carefully controlling the amounts of each gas and the temperature in the treatment furnace, the steel surface can be hardened to provide long lasting components such as gears and tools.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Infrared Sources for Capnography

    Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

    By Axetris AG based in Kaegiswil, SWITZERLAND.

  • Air Monitoring

    The recent COP 21 meeting reexposed the need for global coordination to monitor Green House Gases (GHG) as well as emissions of ChloroFluoroCarbons (CFC). Networks of sensors have been deployed over the Earth to measure concentration of gases such as methane, carbon monoxide, ethane, carbon dioxide, nitrous oxide, nitrogen oxide and dioxide (NOx)… Such task requires instrument with not only ultra high accuracy but also ultra high precision. Our QCNose Instruments have been designed for such operations...

    By Aerovia based in Reims Cedex 2, FRANCE.

  • NDIR Carbon Dioxide (CO2) Monitoring

    Carbon dioxide has a wide range of commercial uses, from the production of lasers to the carbonation of soft drinks. This gas has become a topic of interest because it is classified among the greenhouse gases, gases which impact the Earth's environment when they reach high concentrations in the atmosphere. We propose solutions for medical diagnostics (out-breath control) and for ecological monitoring (control of carbon dioxide, exhaust gases in the atmosphere).

    By LED Microsensor NT based in Saint-Petersburg, RUSSIA.

  • Premium

    Carbon Dioxide Monitoring for Indoor Air Quality

    Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4...

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Indoor Air Quality Monitoring

    Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Gas detection solutions for the commercial diving industry

    We are proud to be the world leader in gas analysis provision to the amazing world of commercial diving. We created our first commercial diving monitor in the early 1980s, the Analox 100. We started to work with customers including Divex (now known as JFD), Advanced Marine and Amron... and the rest is history. Our life-supporting oxygen, carbon dioxide, carbon monoxide and hydrocarbon analysers can be found on almost every diving system in the world. Our vast range of products includes the SDA range which...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you