Only show results available in Virginia? Ok

breathing air gas monitor Applications

  • Premium

    Gas monitoring instruments and systems for compressed breathing air

    Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Gas detection solutions for the breathing air gas sensors industry

    If you use compressed breathing air it is essential to monitor for contaminants including carbon monoxide (CO), carbon dioxide (CO2) and volatile organic compounds (VOCs) as well as oil mist and water vapour. Some people spot-check their compressed air quarterly using colorimetric tubes, but it is safer to test the air continuously. If you are operating or servicing equipment containing fluorinated greenhouse gas (F gas) in refrigeration, air conditioning and fire protection systems you need to adhere to requireme...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Premium

    Air quality and industrial gas monitoring systems for Semiconductor

    Production of semiconductor materials require extremely clean air supply that help ensure the quality of the materials being manufactured as well as specialized gases to enable production to occur smoothly and efficiently. Teledyne API carries a complete line of Industrial gas process instruments including those that both produce and measure gases in these unique applications. Teledyne API also provides specialty gas instruments designed to help reduce or eliminate Airborne Molecular Contamination (AMC) in the...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Ambient air monitoring

    Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Portable and fixed gas analysers for CO2 monitoring

    Monitoring industrial processes, CO2 gas quality control and indoor air quality can all be achieved using Geotech`s wide ranging CO2 analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Air quality and industrial gas monitoring systems for Road side air monitoring

    Motor vehicle emissions are a major source of air pollution in urban areas and impact the lives of billions of people every day around the world. Motor vehicle exhaust contains toxic chemicals that are harmful to people’s health when exposed at certain levels. These toxic fumes cause smog in the atmosphere, which can affect very broad regional air sheds and contribute to the formation of cancer. Teledyne API has several products specifically designed to meet the challenging demands of near-roadside air...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Air quality and industrial gas monitoring systems for CEMS - Stack air monitoring

    Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the world.

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Gas analyzers and monitoring systems for Compliance measurements

    Continuous Monitoring Required; Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Benzene Monitoring

    Cerex Monitoring Solutions manufactures UVDOAS analyzers for a variety of Benzene monitoring applications. As benzene specific single gas or multi-gas analyzers, our instruments are available with application specific detection ranges and fully configurable alarm functionality.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Solutions for fence-line and perimeter ambient air monitoring

    Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling hardware.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Gas analyzers and monitoring systems for Industrial hygiene

    Indoor air quality can be affected by many factors, such as gases, particulates and microbial contaminants. These factors can have serious health impacts and influence on the comfort of building occupants. Therefore, monitoring and analysis of indoor air is important for assessing potential health impact. One objective of the assessment is to ensure that the concentrations in the working environment do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Atmospheric VOC online monitoring solution

    VOCS are volatile organic compounds, according to their chemical structure it can be divided into alkanes, aromatic hydrocarbons, esters, aldehydes, etc. The most common type of gas composition are benzene, toluene, xylene, styrene, trichloroethylene, chloroform, trichloroethane, diisocyanate (TDI), two different cyanide methyl ester, etc. the gas is discharged in industries such as the spray paint, petrochemical, chemical, shoes, printing, electronics, clothing dry cleaning, oil, construction, etc. VOCS has big...

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Industrial monitoring solutions for the gas analysers areas

    Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these gases plus moisture, pressure and temperature. The analyser can be configured for single channel operation to monitor any of these gases plus CH4 and HCl.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Gas Detection for the Gas Industry for the Indoor Air Industry

    Sewerin manufacture a wide range of gas warning detectors suitable for many different gas monitoring, detection and warning applications.Sewerin gas detectors are used to monitor and warn of the dangers from explosive, toxic and asphyxiating gases.

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Open path ambient air quality monitoring

    Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you