building monitoring Applications

24 Results found
Only show results available in Virginia?
OK
  • Keyword: building monitoring ×

Industrial solutions for energy efficiency in buildings

by Advantic Sistemas y Servicios S.L     based in Alcobendas, SPAIN

Nowadays, the new laws of protection and sustainability, increased energy prices and greater environmental awareness and drive increased largely rational use of energy, not only for end users but also large consumers and systems thereby improving efficiency in buildings.

Dust monitoring and Sand Storm Monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

Smoke generator device for leak testing & building envelope testing

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak. After Concept developed a bespoke system for their aircraft testing requirements, a spokesperson for the RAF commented: `The use of smoke as a means by which to detect cabin pressurisation leaks has been shown to be extremely effective and is unquestionably superior to any alternative detection method used to date!`

Monitoring Sewage Flow

by Solid Applied Technologies Ltd. (SolidAT)     based in Ashkelon, ISRAEL

Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

Flow & Energy Management Solutions for building automation

by Spire Metering Technology     based in Marlborough, MASSACHUSETTS (USA)

For comprehensive energy efficiency monitoring for both hot water systems and chilled water systems. Reduce energy bills by monitoring the usage. Conserve energy and go green.

Electronic Bulk/ Domestic Water Meter

by Energy Management System Co., Ltd.     based in Tainan City, TAIWAN

■■ EMS, Taiwan ■■ Intelligence Electronic Water Meter: - Class C Electronic Water Meter - Woltmann Electronic Water Meter - Multi-Jet Water Meter - Vortex Flow Meter - Magnetic Flow Meter - Ultrasonic Flow Meter - Gear Free - Magnet - Free - DMA (District Meter Areas) management - NRW (Non-revenue water) - AMR (Automatic Meter Reading) - MNF Log (Minimum night flow) - Monthly Water Consumption Log -Tamper-Proof Device - Water Leaking Detector - Bi-Directional Flow Indicator - ISO 4064:2005 / ISO 4064: 1993 - All Kinds of Transfer Interface (wired/ wireless) - Smart houses, smart building

Measurement solutions for naval

by Smart Testsolutions GmbH     based in Stuttgart, GERMANY

The importance of fuel cells and batteries is significantly on the increase in ship building. Here, our customers benefit from the extensive experience of SMART TESTSOLUTIONS. Here at SMART we have recognised the importance of high-performance energy storage systems and generators already at an early stage. Our competitive edge with regard to know-how refers most of all to the reliable monitoring of fuel cells and batteries. Our systems are by now being used in many countries around the world. Convince yourself of our high competence. Talk to us!

Laboratory Analytical - pH-Measurement Application

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The right System for the right Application. By choosing the right electrode, instrument and accessories customers can build a dedicated system for their application. A system capable of giving accurate and repeatable results time after time.

Air quality monitoring for health protection

by AQMesh     based in Stratford-upon-Avon, UNITED KINGDOM

Vertical pollution monitoring at different levels of a high rise building can reveal exposure of inhabitants to pollution and inform guidance about ventilation.

Online Monitoring for the Food & Beverage Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Several on-line monitoring technologies such as non-destructive types have become increasingly important due to the increasing automation and the incorporation of new and more efficient processes in the food industry. Food quality and safety of food are the main points of interest. AppliTek builds and supplies the necessary analytical tools that will allow for a high throughput and a short response time to increase process efficiency and reduce waste, with seamless integration in the existing infrastructure.

Waste water treatment plants Screening area: stripping

by Chromatotec Group     based in Val de Virvée, FRANCE

Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment works an H2S analyzer has been installed in the main building to complement the protection provided by individual monitors. Chromatographic measurements show that other sulfurous compounds including Methylmercaptans are present in the air in addition to H2S.

Industrial solutions for structural health monitoring

by Advantic Sistemas y Servicios S.L     based in Alcobendas, SPAIN

Real time monitoring of structures is an excellent field of application for wireless sensor networks. ADVANTICSYS has provided solutions for the monitoring of structure in different fields, from bridges, where the vibration has to be controlled both in the construction and operation phase, to cultural heritage buildings with their structural integrity under risk.

Aerosol and particle technology for aerosol generation industry

by Palas GmbH     based in Karlsruhe, GERMANY

For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and overpressure up to 10 bar.

Indoor Air Quality Monitoring

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. CO2 production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks. Excess CO2 levels can lead to tiredness and a lack of concentration and can contribute to the symptoms of Sick Building Syndrome such as headaches, eye, nose and throat irritation, itchy skin and nausea.

Noise and vibration monitoring for the construction site

by ACOEM     based in Limonest, FRANCE

By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to adopt a transparent approach to communication with local residents, in order to avoid resistance and instead gain their support for a given project. Providing the site manager with reliable and official data, should it be required. 01dB offers solutions for construction professionals to suit the requirements of each building site. It provides them with metrological systems (such as the certified DUO sound level meter, dB4 and MR2002) with 01dB WebMonitoring services to ensure optimal control of noise & vibration impact of the construction work, using as well communication tools intended for the general public.

Flow & Energy Management Solutions for HVAC & facility

by Spire Metering Technology     based in Marlborough, MASSACHUSETTS (USA)

Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

BREEAM Air Quality

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

The sustainability and environmental impact of a new build house is typically assessed using BREEAM. Part of the BREEAM assessment method is determining the air quality inside the house. Gradko can supply a range of products for qualified BREEAM assessors. We try to work with qualified BREEAM assessors to determine and meet their requirements. The products we normally supply are used for monitoring formaldehye and VOC levels in new build properties.

PTR-MS systems for indoor air quality monitoring

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

Room-air VOC detection and monitoring. Measurement of most common VOCs causing smells or health effects. Real-time monitoring of emissions related to the Sick Building Syndrome. Ozone induced reactions in aircraft cabins.

Carbon Dioxide Monitoring for Indoor Air Quality

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. Carbon dioxide production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks.

Marine envrionmental solutions for water sector

by Fugro EMU Limited     based in Portsmouth, UNITED KINGDOM

Fugro EMU Limited has an extensive history of supporting clients in the water sector, with over 20 years’ experience in this field. Building on our long established relationships with water sector clients, Fugro EMU offer an integrated approach to the project management and delivery of consent application, investigational studies, surveys, monitoring and reporting. Fugro EMU offers technical expertise and a complete understanding of the consent and legislative requirements that shape the needs of our water sector clients both within the UK and abroad.

Need help finding the right suppliers?

Let the XPRTs do the work for you