building water Applications

44 Results found
Only show results in Virginia?
OK
  • Keyword: building water ×

Flow & Energy Management Solutions for building automation

by Spire Metering Technology     based in Marlborough, MASSACHUSETTS (USA)

For comprehensive energy efficiency monitoring for both hot water systems and chilled water systems. Reduce energy bills by monitoring the usage. Conserve energy and go green.

Chemical Water Treatment for drinking water

by Kurita     based in Ludwigshafen, GERMANY

Kurita specifically developed product ranges for drinking water treatment, in order to avoid any kind of problem that might occur with the preparation, transport or use of drinking water. Our technologies can be used for all kinds of conditions, from municipal water suppliers to private buildings (e.g. hotels, universities, hospitals and private homes).

Industrial water softening

by PuriTech Ltd     based in Herentals, BELGIUM

The presence of certain metal ions in water causes a variety of problems. These ions interfere with the action of soaps, lead to build up of limescale, which can foul plumbing, boilers, heating equipment. Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water extends the lifetime of plumbing and heating equipment. Softening of low TDS ( Total Dissolved Solids ) water is done commonly with a Strong Acid Cation ( SAC ) exchange resin operating in the sodium form and regenerated with brine. PuriTech`s latest development is a very performant continuous ion exchanger, based on PuriTech`s innovative ION-IX technology which is based on true counter-current ion exchange.

Water Storage for Drinking Water Plants

by Superior Tank Co., Inc.     based in Rancho Cucamonga, CALIFORNIA (USA)

Superior Tank Co., Inc. manufacturers bolted and welded steel storage tanks for potable water applications. Superior Tank Co., Inc. builds water storage tanks to meet AWWA and NSF 61 Standards. Our bolted steel water storage tanks are manufactured to be installed in 1/3 the time as other storage tanks, are easy to maintain, service and repair.

Industrial water Copper removal and recovery

by PuriTech Ltd     based in Herentals, BELGIUM

Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Recycling is a major source of copper in the modern world. A combination of economic and regulatory factors are now at work to make metal recycle and water reuse very attractive.

Marine envrionmental solutions for water sector

by Fugro EMU Limited     based in Portsmouth, UNITED KINGDOM

Fugro EMU Limited has an extensive history of supporting clients in the water sector, with over 20 years’ experience in this field. Building on our long established relationships with water sector clients, Fugro EMU offer an integrated approach to the project management and delivery of consent application, investigational studies, surveys, monitoring and reporting. Fugro EMU offers technical expertise and a complete understanding of the consent and legislative requirements that shape the needs of our water sector clients both within the UK and abroad.

Industrial water Ammonia & Arsenic removal from water

by PuriTech Ltd     based in Herentals, BELGIUM

Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin that has been saturated with Ammonia ions (and some calcium and magnesium ions)moves into a one-bed displacement zone with softened water to ensure hard water does not cause precipitation within the multi port valve.

Actuators for the marine industry

by Rotork     based in Bath, UNITED KINGDOM

Rotork specialise in producing actuators and related equipment for every part of the ship building industry. We have over 50 years` experience in serving ship builders and operators and we understand the challenges faced. Rotork valve actuators are widely recognised as being the most technically advanced, reliable, long life, watertight and user-friendly actuators in the business.

Electronic Bulk/ Domestic Water Meter

by Energy Management System Co., Ltd.     based in Tainan City, TAIWAN

■■ EMS, Taiwan ■■ Intelligence Electronic Water Meter: - Class C Electronic Water Meter - Woltmann Electronic Water Meter - Multi-Jet Water Meter - Vortex Flow Meter - Magnetic Flow Meter - Ultrasonic Flow Meter - Gear Free - Magnet - Free - DMA (District Meter Areas) management - NRW (Non-revenue water) - AMR (Automatic Meter Reading) - MNF Log (Minimum night flow) - Monthly Water Consumption Log -Tamper-Proof Device - Water Leaking Detector - Bi-Directional Flow Indicator - ISO 4064:2005 / ISO 4064: 1993 - All Kinds of Transfer Interface (wired/ wireless) - Smart houses, smart building

Water treatment for legionella prevention and control

by Applied Oxidation LLC     based in Chattanooga, TENNESSEE (USA)

Whether you find yourself in a hotel bath room, cruise ship cabin, hospital, office building, industrial plant, greenhouse, car wash facility or your own hot tub, the combination of certain temperature levels, stagnant water and the presence of biofilm in water systems is a potential recipe for disaster: an outbreak of Legionnaires’ disease. An outbreak of Legionnaires’ disease is often the result of negligence, having legal repercussions for responsible parties. Because of its chemical and biocidal characteristics, chlorine dioxide is ideal for maintaining good standards of water hygiene. Chlorine dioxide has consistently been demonstrating to be the best molecule for eradicating the causative organism of Legionnaires’ disease.

Biological wastewater processes for municipal treatment plants

by Biowater Technology     based in Cumberland, RHODE ISLAND (USA)

Biowater have knowledge and competence to help in designing and building new systems and upgrade existing infrastructure based on biotechnology as CFIC, MBBR and IFAS solutions.

The Company offers cost-effective solution that allows municipal plants to both increase their treatment capacity and upgrade the effluent quality with minimal civil works.

Automated solutions for the power plant inlet water dredging

by Liquid Waste Technology LLC (LWT LLC)     based in New Richmond, WISCONSIN (USA)

Liquid Waste Technology’s dredging systems are used for power plant cooling water dredge applications. LWT’s dredges are designed to remove the sand, silt and sediment that build up in reception ponds and inlet channels to power plants. Each dredging system is custom built for the inlet water application, including the level of automation, removal rate and dredging depth required for each job.

Water treatment for food processing

by Applied Oxidation LLC     based in Chattanooga, TENNESSEE (USA)

Most food processing facilities currently use a combination of different chemicals for all surface and machine disinfection. They periodically rotate the use of different sanitizers to prevent the harmful microorganisms from building a resistance to their killing properties. Unfortunately facilities are still experiencing pathogen outbreaks. Chlorine dioxide’s unique killing ability does not allow for the build up of resistance or mutation, and therefore eliminates the need for all of the other chemicals. Chlorine dioxide is effective for use in controlling microbiological growth in flume waters and other food processing water systems such as chill water systems and hydrocoolers.

Water tower retrofit for repair/replacement

by Cycle Stop Valves, Inc.     based in Lubbock, TEXAS (USA)

Cities, Towns, Sub Divisions, Mobile Home Courts, High Rise Buildings, and many others can use the Cycle Stop Valve (CSV) to turn any Submersible, Turbine, or Centrifugal pump into a variable flow, constant pressure system. The CSV maintains a constant pressure on the water system throughout a wide range of flow. Eliminating line breaks and leaks, while precisely providing any amount of water required, the CSV can conserve water as well as energy.

Waste water treatment plants Screening area: stripping

by Chromatotec Group     based in Val de Virvée, FRANCE

Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment works an H2S analyzer has been installed in the main building to complement the protection provided by individual monitors. Chromatographic measurements show that other sulfurous compounds including Methylmercaptans are present in the air in addition to H2S.

Rainwater and stormwater system

by Lindsay Corporation     based in Omaha, NEBRASKA (USA)

Upon recognizing a need for improved water conservation in both new and existing buildings, Watertronics developed SkyHarvester water conservation systems. SkyHarvester provides a single-source solution for every step of the water management cycle, from system design and manufacturing to installation supervision and long-term support.

Circuits Protections; nozzles, Injectors, etc. for filtration.

by Sistema Azud, S.A.     based in Alcantarilla, SPAIN

The installation of an AZUD System eliminates the risk of clogging of nozzles, injectors, tubes and other small openings by removing the larger particles from the liquid flow.  It also helps in decreasing scale build up in the system and the accumulation of solids settling in the collection sump.

Sludge dewatering and water recovery from sand and aggregate washing processes

by Bilfinger Water Technologies GmbH     based in Aarbergen, GERMANY

Bilfinger Water Technologies designs and builds complete water recovery and slurry dewatering systems for sand and aggregate washing plants. These high-performance systems minimize water usage and solid disposal problems.

ElectroCoagulation Water Treatment Plant

by EnviroTech Limited     based in Masdar City, UNITED ARAB EMIRATES

EnviroTech Limited, with distributors in Abu Dhabi, Dubai, Sharjah and Ajman in the United Arab Emirates specialise in a comprehensive range of air conditioning and refrigeration energy saving systems, grey water recycling systems and waste water treatment systems. Our Energy Management System target markets include:- Hotels, Offices, Leisure, Shopping Malls, Restaurants and Retail, Government Buildings, Schools and Universities, Factories, Cold Stores, Supermarkets Water Treatment and Energy Saving Systems EnviroTech Limited with Head Quarters in London, England and Masdar City, Abu Dhabi specialise in a comprehensive range of Air Conditioning Refrigeration Energy Saving Systems manufactured in England, UK and Grey Water Recycling Systems, Waste Water Treatment Systems generally Designed and Made in England in the UK. The water treatment and energy saving systems include ElectroCoagulation and ElectroChlorination systems which require low energy usage with no chemical requirement

Gravity Main Sulfide Odor Control with Hydrogen Peroxide

by USP Technologies     based in Atlanta, GEORGIA (US) (USA)

Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

Need help finding the right suppliers?

Let the XPRTs do the work for you