Only show results in Virginia? Ok

building water system Applications

  • Premium

    Ultraviolet disinfection systems for the water parks industry

    As water features, wave machines, flumes and splash pads raise the fun factor in swimming pools, traditional methods of disinfecting water, using chlorine, are causing problems for operators and customers alike. Higher water temperatures and increased turbulence in leisure pools requires increased dosages of chlorine, leading to pool users complaining of burning eyes, red or itchy skin and an over powering chlorine smell throughout the facility. In some extreme cases the fabric of the building has also been attacked through corrosive condensation.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Flow & Energy Management Solutions for building automation

    For comprehensive energy efficiency monitoring for both hot water systems and chilled water systems. Reduce energy bills by monitoring the usage. Conserve energy and go green.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Rainwater and stormwater system

    Upon recognizing a need for improved water conservation in both new and existing buildings, Watertronics developed SkyHarvester water conservation systems. SkyHarvester provides a single-source solution for every step of the water management cycle, from system design and manufacturing to installation supervision and long-term support.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Industrial water Ammonia & Arsenic removal from water

    Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin that has been saturated with Ammonia ions (and some calcium and magnesium ions)moves into a one-bed displacement zone with softened water to ensure hard water does not cause precipitation within the multi port valve.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Automated solutions for the power plant inlet water dredging

    Liquid Waste Technology’s dredging systems are used for power plant cooling water dredge applications. LWT’s dredges are designed to remove the sand, silt and sediment that build up in reception ponds and inlet channels to power plants. Each dredging system is custom built for the inlet water application, including the level of automation, removal rate and dredging depth required for each job.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Municipal and industrial pumping systems

    Watertronics provides cutting-edge pump systems to the Municipal market including cities, towns, and villages along with large government buildings, high-rises and skyscrapers.  We design custom pumping solutions to fit the broad spectrum of Municipal & Industrial needs, all with improved efficiencies designed to effectively reduce power and water consumption. From the small-horsepower modular booster designed to fit through a standard doorway to the high-horsepower water treatment facility with remote monitoring, Watertronics can provide the solution to most any Municipal water challenge.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Water treatment for legionella prevention and control

    Whether you find yourself in a hotel bath room, cruise ship cabin, hospital, office building, industrial plant, greenhouse, car wash facility or your own hot tub, the combination of certain temperature levels, stagnant water and the presence of biofilm in water systems is a potential recipe for disaster: an outbreak of Legionnaires’ disease. An outbreak of Legionnaires’ disease is often the result of negligence, having legal repercussions for responsible parties. Because of its chemical and biocidal characteristics, chlorine dioxide is ideal for maintaining good standards of water hygiene. Chlorine dioxide has consistently been demonstrating to be the best molecule for eradicating the causative organism of Legionnaires’ disease.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Gas infusion technology solutions for the water treatment industry

    Every municipality in the developed world has some form of water and wastewater treatment system. This varies from simple outfalls direct to the ocean to very sophisticated activated sludge plants with multiple unit processes dedicated to converting human waste, industrial effluents and storm runoff into clean water discharges and solids acceptable for some form of reuse. inVentures using its gas inFusion technology, has developed the gPRO system for the prevention and remediation of major algae blooms that negatively affect the water quality for millions of people. The company is currently working with several major water authorities on algae prevention programs by efficiently oxygenating specific regions of the water storage areas. Target Oxygenation prevents the build up of algal masses. Algal masses often require expensive treatment remedies and cause major taste and odor issues within drinking water supplies.

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • ElectroCoagulation Water Treatment Plant

    EnviroTech Limited, with distributors in Abu Dhabi, Dubai, Sharjah and Ajman in the United Arab Emirates specialise in a comprehensive range of air conditioning and refrigeration energy saving systems, grey water recycling systems and waste water treatment systems. Our Energy Management System target markets include:- Hotels, Offices, Leisure, Shopping Malls, Restaurants and Retail, Government Buildings, Schools and Universities, Factories, Cold Stores, Supermarkets Water Treatment and Energy Saving Systems EnviroTech Limited with Head Quarters in London, England and Masdar City, Abu Dhabi specialise in a comprehensive range of Air Conditioning Refrigeration Energy Saving Systems manufactured in England, UK and Grey Water Recycling Systems, Waste Water Treatment Systems generally Designed and Made in England in the UK. The water treatment and energy saving systems include ElectroCoagulation and ElectroChlorination systems which require low energy usage with no chemical requirement

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • Water treatment for food processing

    Most food processing facilities currently use a combination of different chemicals for all surface and machine disinfection. They periodically rotate the use of different sanitizers to prevent the harmful microorganisms from building a resistance to their killing properties. Unfortunately facilities are still experiencing pathogen outbreaks. Chlorine dioxide’s unique killing ability does not allow for the build up of resistance or mutation, and therefore eliminates the need for all of the other chemicals. Chlorine dioxide is effective for use in controlling microbiological growth in flume waters and other food processing water systems such as chill water systems and hydrocoolers.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water tower retrofit for repair/replacement

    Cities, Towns, Sub Divisions, Mobile Home Courts, High Rise Buildings, and many others can use the Cycle Stop Valve (CSV) to turn any Submersible, Turbine, or Centrifugal pump into a variable flow, constant pressure system. The CSV maintains a constant pressure on the water system throughout a wide range of flow. Eliminating line breaks and leaks, while precisely providing any amount of water required, the CSV can conserve water as well as energy.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

  • Circuits Protections; nozzles, Injectors, etc. for filtration.

    The installation of an AZUD System eliminates the risk of clogging of nozzles, injectors, tubes and other small openings by removing the larger particles from the liquid flow.  It also helps in decreasing scale build up in the system and the accumulation of solids settling in the collection sump.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Sludge dewatering and water recovery from sand and aggregate washing processes

    Bilfinger Water Technologies designs and builds complete water recovery and slurry dewatering systems for sand and aggregate washing plants. These high-performance systems minimize water usage and solid disposal problems.

    By Aqseptence Group based in Aarbergen, GERMANY.

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Pure drinking water solutions for high-security facilities

    In June 2002 an Al-Qaeda cell was captured in Rome just before they poisoned the water supply of the US Embassy. This event demonstrates the added risk that government buildings, military contractors, royal palaces and other high-security facilities can encounter. These facilities should not trust an outside company to deliver bottled water, but instead must stay in full control of their own water supply at all times. Our secure drinking water systems are in over 100 US Embassies around the world because they provide a consistent supply of fresh, distilled water, which is the highest level of protection against the full range of possible contaminants. We provide premium water distillers for these high-security facilities as well as small systems to protect the staff at home. We also provide risk assessment and water education services.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Vacuum excavation solutions for car wash pit clean out

    The Vac‐Tron trailer mounted vacuum system is the perfect tool for cleaning out car wash pits. By utilizing the vacuum portion of the system you can remove the oil, grease, chemical slick and garbage debris from the washout pits. Once all the debris is removed, you can utilize the high pressure water wand that offers 4 GPM at 4,000 psi to clean out the structure (i.e., walls, floor of the pits, grate overhead) leaving it clean and free of any build‐up. The Mini‐Combo Model is equipped with a jetter system which offers 15 GPM at 2200 psi. Use of this efficient tool will enable you to clean out the 4” lines that connect the washout pits so as to ensure proper drainage of contaminated water to the holding tank, if applicable.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Amphibious multipurpose dredger for maintaining and cleaning industrial ponds

    Maintenance is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities.

    Watermaster is easy to transport to the site on a trailer and from there the dredger simply walks into the pool by itself. In the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. It can pump the mass into another pool up to 1,5 kilometres away. By backhoe work it can build and repair the pool banks.

    Watermaster can also recover valuable materials from tailings ponds and drainage ponds.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • High performance separation system for ethylene industry

    Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Industrial wastewater treatment systems for oil and gas industry

    Ecolotron, Inc. manufactures the world’s best electrolytic equipment and systems used in a variety of water and wastewater treatment applications. Ecolotron, Inc. applies patented E – FLOC technology to design and build electrolytic wastewater systems for the treatment and beneficial reuse of frac, flow-back and other produced waters associated with oil and gas exploration and production activities. E-FLOC technology uses a low Voltage electric current to destabilize multiple contaminates simultaneously via a single unit process. Both dissolved and suspended contaminates are removed, emulsions are split and water soluble hydrocarbons (TPH / BTEX) are oxidized as bacteria is also destroyed. With over 20 year of success in the oil & gas and water treatment industries, Ecolotron, Inc. provides custom engineered, turn-key solutions for the construction of centralized, produced water treatment systems and facilities.

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you