Only show results in Virginia? Ok

can recycling Applications

  • Premium

    Crushing of cans with Mercodor crushing systems

    The crushing of cans such as, for example, paint cans, food cans, oil cans or beverage cans serves, on the one hand, for recycling the raw materials and at the same time contributes to the protection of the environment, because part of the recycled raw materials can be reused, but also, on the other hand, for the volume reduction.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Recycling equipments for tyre recycling

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants and cement ovens or for equestrian (i.e. rubber mixed with sand or sawdust used in the horse industry as ground in the stable or at the tracks). Rubber granulate is reused in e.g. sports fields, artificial turfs, rubber mats and moulded products. Rubber powder can be reused in rubber paved asphalt. The recovered steel can be smelted and reused just like non-recovered steel. Finally, the liberated textile has a very high effective burning value and can therefore be mixed with other materials in order to increase that material’s effective burning value. Read more: http://eldan-recycling.com/en/tyre-recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling of Incinerator Slag

    Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Recycling equipments for aluminium recycling

    Aluminium items are eminently suited to recycle. Did you know that aluminium can be recycled infinitely without losing quality? Recycling aluminium beverage cans saves 95% of the energy used making an aluminium can, compared to making it from raw bauxite. The energy saved from recycling one aluminium Coca Cola can will run a TV for three hours. If not recycled, it takes 80-100 years for an aluminium can to break down in a landfill.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Metal sorting for the metal recycling industry

    Metals can be identified according to the colour, nature of the metal and of elemental composition.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Recycling Systems for the recovery of secondary materials

    The recovery and reclamation of recyclable materials in the waste stream is possible through various selection and separation processes.In the case of materials such as PP, PET, HDPE, plastic, paper, aluminium etc. can be put back into circulation creating new raw materials, the so called “secondary” raw materials, produced not by nature but by man.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Waste sorting solutions for the single stream recycling

    Single stream recycling, otherwise known as dry commingled waste, comprises primarily of paper and cardboard, plastic packaging waste, textiles, cans and, in some cases, glass. The demand for these secondary resources continues to rise compared with that of primary resources.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Binding device for plastic recyclers

    We offer balers with great compression force and an additional binding device for cross-binding. It can bale PET packaging of up to 110 x 77 x 120–150 cm in size and weighing 400–500 kg. It will enable the loading of more than 22 tons into a 40`` container.

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Waste recycling systems for wood waste processing

    Kiverco specialise in the design, manufacture and installation of Wood Waste Processing systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Wood Waste Processing recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Recycling Equipment for Confidential Shredding Industry

    Confidential Archive Shredding Solutions; Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for ervery installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment. Significant savings can be achieved at many offices by freeing up valuable office space that is occupied by filling cabinets or boxes full of documents. However, when it comes to classified and confidential documents, out of sight doesn`t necessarily mean out of mind. That`s why at Bollegraaf we invest a lot of time into offering products and installations that meet the required legal standards for the destruction of such confidentail documents. The result of this effort: your peace of mind.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Premium

    Scrap Metal Recycling

    Recognized as an industry leader in shredder recycling, we operate 50 recycling facilities for metal, green waste, plastic, food waste, rubber, tires, RDF waste. Harden’s facilities are designed with safety and efficiency in mind for both employees and customers. Our equipment is maintained and updated regularly and our scales are calibrated quarterly. The properties of metals provide unique benefits and advantages for their recycling. Unlike other recycled materials, such as paper and plastic, metals can be repeatedly recycled without degradation of their properties. Metals from secondary sources are just as good as metals from the primary sources. The scrap metal recycling lines are extremely heavy duty systems designed for processing scrap steel, electronic waste, aluminum castings and profiles, ect. We offer both medium and high capacity plants which benefit from low maintenance & operational costs, and lower capital investment when compared with the traditional systems.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Rubber Tire Recycling

    As we known, the black pollution- tires cover all over the world and it is growing at one billion waste tire every year. It does damage to the environment. The traditional disposal method of waste tire is to burn or pile up outdoor for a long time, but whether burning or piling up, waste tire would take up a lot of land and cause new pollution during waste tires. So we need to recycle waste tires. Rubber tire recycling machine can crush waste rubber into chip. The finial rubber granules can be made into rubber pipe, conveyor belt, rubber floor tile. Tire Recycling line is adopting physical recycling method and is suitable for our company develop and produce a waste tire and rubber recycling equipment, mainly is suitable for the grinding, wire tire, steel wire ties and all sorts of waste rubber products. This waste tire recycling plant running in normal temperature, no need to add any other chemicals, no pollution to the environment.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Waste recycling systems for co-mingled

    Kiverco specialise in the design, manufacture and installation of Co-Mingled waste recycling systems. We can offer a bespoke recycling plant that is tailored to meet your unique Co-Mingled recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Co-Mingled recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Metal detection for in the Recycling Industry

    Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Eriez metal detectors have varied applications in large array of industries from aggregates to recycling, ceramic to food, mineral processing to glass, plastics and rubber to packaging. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Classification and identification of recyclable material

    This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics` state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling industry.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Waste recycling systems for top soil

    Kiverco specialise in the design, manufacture and installation of Top Soil recycling systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Top Soil recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you