can recycling system Applications

62 Results found
Only show results available in Virginia?
OK
  • Keyword: can recycling system ×

Crushing of cans with Mercodor crushing systems

by MERCODOR GmbH Sondermaschinenbau KG     based in Frankfurt am Main, GERMANY

The crushing of cans such as, for example, paint cans, food cans, oil cans or beverage cans serves, on the one hand, for recycling the raw materials and at the same time contributes to the protection of the environment, because part of the recycled raw materials can be reused, but also, on the other hand, for the volume reduction.

Waste recycling systems for co-mingled

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture and installation of Co-Mingled waste recycling systems. We can offer a bespoke recycling plant that is tailored to meet your unique Co-Mingled recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Co-Mingled recycling plant and its maximum productivity potential.

Waste recycling systems for top soil

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture and installation of Top Soil recycling systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Top Soil recycling plant and its maximum productivity potential.

e-scrap recycling System

by Jiangxi Mingxin Metallurgy Equipment Co.,Ltd.     based in Shicheng County, CHINA

PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

Tire shredding

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

SSI offers a wide variety of solutions for people who want to process tires for cars, trucks, aircraft, agricultural and OTR/Mining tires. Our focus has been to develop reliable, robust and easy-to-work-on equipment that will reduce whole tires down to chunks ranging in size from long “strips” to 1` or 2` (25-50mm) chips. We have systems that can process tires at rates ranging from 2 tons (200 car tires) to over 30 tons (3,000 car tires) per hour. Tires do not need to be debeaded in order to be shredded in our equipment.

Recycling Systems for the recovery of secondary materials

by Macpresse Europa S.R.L     based in Vernate, ITALY

The recovery and reclamation of recyclable materials in the waste stream is possible through various selection and separation processes.In the case of materials such as PP, PET, HDPE, plastic, paper, aluminium etc. can be put back into circulation creating new raw materials, the so called “secondary” raw materials, produced not by nature but by man.

Waste recycling systems for composting

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture, and installation of compost recycling systems that will be unique to your compost recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Composting recycling plant and its maximum productivity potential.

Recycling Equipment for Confidential Shredding Industry

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Confidential Archive Shredding Solutions; Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for ervery installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment. Significant savings can be achieved at many offices by freeing up valuable office space that is occupied by filling cabinets or boxes full of documents. However, when it comes to classified and confidential documents, out of sight doesn`t necessarily mean out of mind. That`s why at Bollegraaf we invest a lot of time into offering products and installations that meet the required legal standards for the destruction of such confidentail documents. The result of this effort: your peace of mind.

Waste recycling systems for wood waste processing

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture and installation of Wood Waste Processing systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Wood Waste Processing recycling plant and its maximum productivity potential.

Shredding of Tires and bumpers with Mercodor shredding systems

by MERCODOR GmbH Sondermaschinenbau KG     based in Frankfurt am Main, GERMANY

Mercodor shredding machines are versatile for shredding of auto parts such as tires but also for crushing bumpers. By crushing up raw materials these can better separate for recycling. The crushing of auto parts such as tires and bumpers not only has the advantage for volume reduction it also serves the economic advantage. Mercodor special engineering is your partner for professional shredding of auto parts such as tires and bumpers.

Waste recycling systems for commercial & industrial

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture and installation of Commercial and Industrial waste recycling systems. We can offer a bespoke recycling plant that is tailored to meet your unique C & I recycling specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your C&I recycling plant and its maximum productivity potential.

Recycling of Incinerator Slag

by AD REM N.V. (Valtech Group)     based in Menen, BELGIUM

Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

Waste recycling systems for refuse derived fuel (RDF)

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco can design, manufacture and install bespoke Refuse Derived Fuel recycling systems, which will be unique to your own waste recycling specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your RDF recycling plant and its maximum productivity potential.

Information security shredding & product destruction

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Helping Manufacturers Reduce Associated Losses and Liability Risks. Material Recovery: Waste materials (or defective products) can be shredded to allow recycling or re-use. Wastes generated in manufacturing process such as plastic, rubber, or fibers are ideal candidates for reprocessing. Packaged goods can be shredded to open containers. Contents such as detergent can be collected and separated for repackaging, while contents such as canned food can be separated and reprocessed into animal feed.

Industrial shredders system for metal shredding sector

by WEIMA     based in Ilsfeld, GERMANY

Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.

Systems for the paper recycling industry

by OBC Baling Equipment     based in Cleveland, OHIO (USA)

Business is done best in partnerships, and at OBC, we like to form partnerships with all our paper recycling customers. Not only can we provide the equipment you need to scale up your operation, we can also help your customers organize their recycling programs as well. As an OBC paper recycling partner,  we will add you as a broker resource for our customers that generate paper waste; we are frequently asked for our help in setting up buyer relationships for businesses who do not have experience finding, or are not satisfied with a paper buyer. In addition, we also offer commission for any new customers that are referred to OBC for equipping their recycling operations.

Systems for the product/material destruction industry

by OBC Baling Equipment     based in Cleveland, OHIO (USA)

Product destruction can be a tricky undertaking. Not only do you have a mixed material stream to manage, but you also need to extract and discard the contents of those materials before they can be recycled. Every operation really does require a custom solution that works best for your demands. From deliquifying bottles and cans, to destroying poor-quality or outdated products, OBC has the experience to help you determine the most efficient and effective process to achieve your goals. Keep your workplace environment clean and sanitary, and maximize profit by maximizing throughput.

Recycling Systems for Processing of agricultural waste

by Macpresse Europa S.R.L     based in Vernate, ITALY

Agricultural waste materials like wheat and rice straw, EFB, and bagasse etc. can be sold and used as animal feed, as fuel for kilns and small power plants. and for the production of ethanol. Unfortunately these materials are not easy to compact using traditional agricultural type balers. Macpresse balers have successfully been used in several countries, i.e. Japan, Korea, China, Sudan for transport and storage. Bale weights of up to 2 tons have been achieved.

Waste recycling systems for materials recovery facilities (MRF)

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture and installation of Materials Recovery Facilities that can be tailored to your unique specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your MRF recycling plant and its maximum productivity potential.

Removal of Ferrous Metals in the Recycling Industry

by Eriez Magnetics Europe Ltd     based in Bedwas, UNITED KINGDOM

Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

Need help finding the right suppliers?

Let the XPRTs do the work for you