Only show results in Virginia? Ok

can separator Applications

  • Separation and reinforcement for roads & railways

    Use of geotextiles in Roads & Railways is one of the most common applications of geotextiles. The pumping effect generated by traffic passing can cause a fast deterioration of the ballast and granular support of those to sleepers and asphalt or concrete. High strength nonwoven or woven geotextiles can offer an excellent solution to avoid these failures.

    By Mattex Geosynthetics based in Dubai, UNITED ARAB EMIRATES.

  • Oil skimmers for API separators industry

    Ambar’s belt mop oil skimmer is ideal for the API separators because the mop can cover the entire width of the API thus giving the oil no place to hide. The recovered oil can gravity drain from the oil skimmer or it can be pumped to a near by oil storage container. The end result is recycled oil, improved efficiency and lower operating costs.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Erosion control and separation for hydraulic works

    Tidal fluctuations and wave action can cause major damage to coastlines and off-shore construction projects. Nonwoven and specialty woven geotextiles can be used as a filter under layer beneath stone/ rock armour. Also riprap or synthetic erosion control mats are used to control erosion by disallowing the sub grade soil particles to erode. The geotextiles prevent erosion carried off by runoff water or other erosive waters, such as waves, stream flow, etc.

    By Mattex Geosynthetics based in Dubai, UNITED ARAB EMIRATES.

  • Separation and filtration for urban areas

    In urban areas can geotextiles be found in most diverse applications. The geotextiles are being used in access and paved roads, sport fields, riverbed protection, drainage trenches and pond liner protection. The geotextiles are also being used in vertical drainage applications. Groundwater and excess rainwater can be controlled well when geotextiles are properly used. More and more floods cause serious damage to urban areas.

    By Mattex Geosynthetics based in Dubai, UNITED ARAB EMIRATES.

  • Premium

    Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Filtration technology for Rainwater harvesting industry

    AQQA can produce drinking water quality from rainwater. THE AQQA TECHNOLOGY IS USED IN RAINWATER SYSTEMS TO: remove all particles and sand. remove bacteria and virus. remove parts of plants.

    By Weise Water GmbH based in Hennigsdorf, GERMANY.

  • Premium

    Prefiltration for Reverse Osmosis desalination systems

    AQQA is the ideal system to act as a prefiltration for Reverse Osmosis desalination systems. It is installed directly after the intake from the ocean. By taking out particles > 0,1 µm, the sensitive R.O. membranes can be protected and work much more reliable with a higher output.

    By Weise Water GmbH based in Hennigsdorf, GERMANY.

  • Premium

    Ultrafiltration system for Small communities and villages

    While the AQQA -bag provides drinking water in emergency situations, the AQQA-system is made for sustainable solutions, that are installed permanently and provide drinking water for a community for many years. E.g.: One AQQA80 filter can supply enough water for a small village of up to 1600 persons. It is simply submerged into a tank, that is build locally. The raw water runs through the filter just by gravity. In a second treatment step the water is treated with the AQQA-net using the photocatalytic effect.

    By Weise Water GmbH based in Hennigsdorf, GERMANY.

  • High performance filtration & separation system for amine

    There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the feed stream, or generated within it as a result of the chemistry of the system. These contaminants are typically addressed by means of particle filters and carbon adsorption.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Oil Water Separation / Water Treatment - Chemical Reduction

    Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

    By Hudson Industries based in Vienna, OHIO (USA).

  • High performance separation system for coating industry

    Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online life.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Premium

    Water treatment solutions for the mobile units industry

    Nowadays, drinking water is still not available for all the population. The development of mobile units makes possible the supply of drinking water to remote areas. We can design sand filtration systems adapted to specific demands for containerized water treatment plants

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Industrial water Ammonia & Arsenic removal from water

    Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin that has been saturated with Ammonia ions (and some calcium and magnesium ions)moves into a one-bed displacement zone with softened water to ensure hard water does not cause precipitation within the multi port valve.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • High performance separation system for fuel gas streams

    Fuel Gas Streams are frequently contaminated with liquid aerosols. The liquid exists as a stable and persistent “smoke” in the gas stream. The liquid contaminant can enter the gas stream through any one of a variety of events including – phase separation and condensation, compressor lube-oils from compression, chemical addition to pipelines (including corrosion inhibitors), and entrainment from overheads of contact towers.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Natural gas gathering system for inlet gas separation

    Natural gas gathering systems deliver large volumes of gas via pipleline to the central inlet of the gas processing facility. Removal of solid contaminants and free liquids present in the inlet gas is critical to the downstream process. Iron oxides, iron sulfides, dirt and other deformable particles can flow into the processing system. Effective removal of these contaminants is needed to prevent fouling. Pentair Porous Media technologies will help with a clean, natural gas feed, reducing upsets and associated downtime and increase productivity, lowering capital costs with fewer change-outs.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Industrial and commercial water filtration for reverse osmosis plants

    Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be stopped until the system is repaired.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial and commercial water filtration for canal/river/sea water filtration

    When considering filtration methods, many industries use alternative water sources such as river, borehole, canal or sea-water extraction as a low cost solution for cooling water and various other operations on-site. Although water extraction is a low cost option the water can be of low quality and can cause problems and damage to the system, meaning more resources, time and expense in fixing the problem.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial water TOC and Color removal from water

    All surface waters contain varying amounts of naturally occurring organic acids. The most commonly encountered being tannic and humic. These substances have varying molecular weights and varying amounts of carboxylic functionality. There has been much interest in the removal of these substances from drinking water supplies due to their tendency to form THM`s when chlorinated. They can be removed effectively by use of anion exchange resins operated in the chloride cycle. Because the organics can be removed by regeneration with brine, this technology is far most economical.

    By PuriTech Ltd based in Herentals, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you