Only show results available in Michigan? Ok

can shredder Applications

  • Premium

    Shredding machineries for hard drive shredding

    Hard Drive Destruction is one of the fastest growing segments in the Information Destruction Industry. The ST-5 Portable Plug-In Hard Drive Shredder and our ST-5 Stationary Hard Drive Shredder Systems can destroy a hard drive in just 5 seconds. Both shredding systems are also electronically interlocked for safe and easy operation.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for metals shredding & recycling

    Shred-Tech®’s high torque Industrial Shredders can found in many of the world’s largest primary and secondary metal recycling and processing facilities. Shred-Tech®’s applications range from high volume magnesium sprue & runner reduction at over 60 TPH to one of the toughest applications known, the reduction of titanium plate and sheet stock. These slow speed shear shredders reduce shred materials such as baled aluminum, bailed radiators, ACSR cable, industrial, military and consumer...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Scrap Metal Recycling

    Metal scrap processing requires slow speed shredders and hammer mills to densify scraps such as drums, door & window frames, white goods, and metal skeletons. Many metal recyclers around the world use HARDEN shredders to remove airspace, increase density, so as to reduce transportation costs and improve pricing. The shredding process also prepares materials for sorting, delacquering systems and furnaces. With our hardened knife tips design, HARDEN low speed shredders can be used to process ferrous metal,...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Shredders and crushers for casting components

    Many light and non-ferrous metal foundries are faced with the difficult hurdle of dealing with bulky waste consisting of punching burrs or rejects, which are a hindrance to optimal processing. Casting machines which involve the investment of many millions of euros cannot be used to their full capacity because production waste cannot be removed quickly enough. But it does not have to be that way!

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Shredding solutions for drums and cubitainers

    The drums (from 5 to 220 lt) and the IBCs in HDPE are used for the transport and storage of liquids in countless industrial fields, alimentary and not. The shredders proposed by SatrindTech for this application are two-shaft type in the case of a simple volume reduction, used for achieving an optimization of the logistic processes (resulting in significantly reduce transport costs and material storage once shredded) and single-shaft, three- and four-shaft if the goal is to recycle material discarded from the...

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Reliable Shredding Technology for Wood shredding

    The recycling of wood has a very important role in the reuse of the same for industrial purposes or use for the production of renewable energy. In both cases the quality of the grinding and the purity of the material is fundamental, which must be free of metals and other contaminants. The possibility to use shredders, grinders or granulators to deal with individual necessities allows Forrec to develop solutions that are suitable for all types of wood: •Production waste •Waferboards •Logs •Branches •Pallets •Oversiz...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling equipments for white goods

    Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable metals.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Recycling equipment for shredding electronic scrap (E-scrap)

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Shredders and crushers for barrels and containers (IBCs)

    Acids, alkalis, solvents, isocyanates - Anyone dealing with hazardous substances and transporting them in containers is always faced with the problem of proper disposal of the containers in the end. For a long time, the common practice of reconditioners was to dismantle used and non-reusable containers after cleaning and either recycle or dispose of each substance separately. The plastic inner containers were collected and transported by truck to the waste incineration plant. However, this method caused very high...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Recycling equipments for shredding industrial plastics

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipment for industrial paper & wood shredding

    Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of documents.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Shredding solutions for OTR (off-the-road) tyres

    For shredding OTR (Off-The-Road) tyres up to 51″, SatrindTech proposes two-shaft shredders, suitable to a volume reduction of the material. Before proceeding with the shredding phase, it is essential, however, to remove the two central rings of the tyre with a hydraulic debeader and, subsequently, to slice the tire with a hydraulic shrear so to get pieces with a proper size for being introduced in the shredder hopper. After using a two-shaft shredder to get a first reduction of the material, four-shaft...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for pallets, dry wood in general and green wood industry

    The treatment of this material is mainly for a reuse of this material for energy purpose: with wood shredding we refer to pallet and dry wood shredding while with green wood we consider the crashing of the gardening or agricultural waste. Depending on the desired final size, with dry wood different types of shredders can be used: a crusher or a shredder with T-blades can be used for a mere volume reduction of the material or single-, three- and four- shaft shredders if the purpose is getting a size controlled....

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng. based in San Donà di Piave, ITALY.

  • Shredding solutions for on board (marpol)

    The restricted operating spaces on board of a boat make essential the use of compact shredders for optimizing it. These shredders must ensure the required performance in terms of shredding capacity. SatrindTech proposes three models: one at 3hp, one at 10hp and one at 15hp. SatrindTech’s shredders at 3hp are MARPOL 73/78 – Annex V, approved. The other two models available, the 10 and the 15hp models can use special blade sets that can grant the same performances of the certified shredder. The goal to...

    By SatrindTech Srl based in Arluno, ITALY.

  • Industrial shredders system for wood inddustry

    It’s more than just wood! It is an invaluable sustainable resource which can be utilised down to the last splinter. With WEIMA wood shredders there are no limits. Woodchips can be used directly for energy generation or for briquetting. Valuable space can be saved for more productive uses. WEIMA has the know-how covering all the relevant factors for a most efficient and homogenous wood shredding solution.

    By WEIMA based in Fort Mill, SOUTH CAROLINA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you