Only show results available in Virginia? Ok

carbon dioxide gas monitor Applications

  • NDIR Carbon Dioxide (CO2) Monitoring

    Carbon dioxide has a wide range of commercial uses, from the production of lasers to the carbonation of soft drinks. This gas has become a topic of interest because it is classified among the greenhouse gases, gases which impact the Earth's environment when they reach high concentrations in the atmosphere. We propose solutions for medical diagnostics (out-breath control) and for ecological monitoring (control of carbon dioxide, exhaust gases in the atmosphere).

    By LED Microsensor NT based in Saint-Petersburg, RUSSIA.

  • Premium

    Industrial solutions for the carbon dioxide (CO2) lasers

    Carbon Dioxide (CO2) lasers are high power lasers, usually used for cutting of ferrous and non-ferrous metals. High-performance gas flow control is a key requirement for achieving high cutting performance with CO2 lasers. Gas flow control plays an important role for mixing key gases at a number of locations with a CO2 laser: Beam Generation: The gas mixture used as the emitting medium usually consists of CO2, He and N2. Most laser manufacturers specify a minimum required purity for the beam generation gas...

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Carbon dioxide mass flow meters flow solutions

    Thermal mass flowmeters are ideal for Carbon Dioxide metering and mass flow control. Sierra specializes in accurate mass flow measurement and/or control of CO2 gas. Applications range from general industrial process control across numerous industries to Green House Gas monitoring requirements and general research.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY.

  • Gas detection solutions for the breathing air gas sensors industry

    If you use compressed breathing air it is essential to monitor for contaminants including carbon monoxide (CO), carbon dioxide (CO2) and volatile organic compounds (VOCs) as well as oil mist and water vapour. Some people spot-check their compressed air quarterly using colorimetric tubes, but it is safer to test the air continuously. If you are operating or servicing equipment containing fluorinated greenhouse gas (F gas) in refrigeration, air conditioning and fire protection systems you need to adhere to requireme...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for compressed breathing air

    Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Gas analysis & monitoring systems for biogas analysis

    “Biogas” means a mixture of various types of gas (mostly methane) produced by bacterial fermentation in anaerobic conditions(absence of oxygen) of organic residues from waste, decaying plant, carcasses in putrescence. The analyzers of biogas by Infrared cells carry out the continuous analysis of CH4, O2, CO2, H2S and NH3. The whole process sees the decomposition of organic material by some types of bacteria, producing carbon dioxide, molecular hydrogen and methane(methane conversion of organic compounds...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic gas is a mixture of carbon monoxide, carbon dioxide, methane and other gases that is required for hardening or carburising of steel. By carefully controlling the amounts of each gas and the temperature in the treatment furnace, the steel surface can be hardened to provide long lasting components such as gears and tools.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Gas detection solutions for the commercial diving industry

    We are proud to be the world leader in gas analysis provision to the amazing world of commercial diving. We created our first commercial diving monitor in the early 1980s, the Analox 100. We started to work with customers including Divex (now known as JFD), Advanced Marine and Amron... and the rest is history. Our life-supporting oxygen, carbon dioxide, carbon monoxide and hydrocarbon analysers can be found on almost every diving system in the world. Our vast range of products includes the SDA range which...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Gas detection solutions for the laboratories industry

    Fixed & Portable Gas Detectors for Laboratories: A wide variety of gases are used in labs such as carbon dioxide, argon, helium, nitrogen and oxygen. These gases pose a serious risk should they leak, this risk can occur from fixed piped gas systems or individual cylinders of gases. Analox offer a range of fixed & portable gas detectors suitable for various laboratory processes which use gas and are ideal for detecting gas leaks. From portable oxygen monitors, such as our Aspida, to fixed monitors such as...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Premium

    Oxygen monitoring from aerobic and anaerobic for biodegradation tests

    Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.

    By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).

  • Premium

    Measurement of acetaldehyde, methanol, & benzene in CO2 applications for gas manufacturers & food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Methanol, and Benzene (AMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages. The BevAlert Model 8900 employs a photoionization detector (PID). The AMB in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of vinyl chloride, acetaldehyde, methanol, and benzene in CO2 applicaitons for gas manufacturer & food and beverage industry

    The BevAlert Model 8900 provides direct measurement of Vinyl Chloride, Acetaldehyde, Methanol, and Benzene (VCAMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Fluoride emissions monitoring in aluminum smelters

    Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions during the electrolytic process phase to the atmosphere. The gas emissions need to be monitored. Typically the smelters have emission limit values (ELVs) for sulfur dioxide and hydrogen fluoride emissions. These emissions should be measured accurately and with good precision, to ensure the smelter does not exceed its emission limit values. In...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Portable and fixed gas analysers for incubator verification

    Geotech manufactures and supplies portable carbon dioxide monitors for use in incubator laboratories to verify CO2 in IVF and stem cell research applications.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    High quality gas sensor solutions for horticulture

    Ensuring reliable and accurate carbon dioxide measurement. With accurate and reliable carbon dioxide monitoring being an important part of horticultural climate control, Edinburgh Sensor’s Guardian range includes dual wavelength non-dispersive infrared sensor technology with built-in temperature correction. This ensures reliable and accurate carbon dioxide measurement together with long term stability.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Gas detection solutions for the hospitality industry

    Several gases are used in the hospitality industry, mainly carbon dioxide (CO2) and nitrogen (N2). These gases pose a serious risk should they leak, this risk can occur from fixed piped gas systems or individual cylinders of gases. Analox offer a range of fixed & portable gas detectors suitable for various applications which use gas, including beverage dispensers, and are ideal for detecting gas leaks. From portable oxygen monitors, such as our Aspida, to fixed monitors including our Ax60+ and O2NE+, our full...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you