Hundreds of government agencies and companies have embraced the speed and detection capability of DART® mass spectrometry. The use of open air ionization simplifies analysis of even the most complex samples. Experiment modules can be used to increase the reliability of any method by permitting control of sample positioning. The result: a low cost of operation, easy-to-implement technology that improves your ability to get answers to pressing problems.
The inherent flexibility of Procal analysers enables the instruments to be configured to meet Customer’s specific requirements. Their capability to monitor gas concentrations at elevated pressures and temperatures make Procal products ideal for process applications in the Chemical Industry.
In a complex petrochemical facility there may be many thousands of potential leaks paths. Some may be leaking but most will not. Using an infrared Gas Detection camera allows the user to examine many potential leaks sources in a short time and from a distance. The EPA acknowledged gas imaging cameras, such as Opgal’s EyeCGas®, as an approved Leak Detection and Repair (LDAR) Method 21 alternate work practice (AWP).
The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg. The analyser can be supplied in both in situ and extractive configuration to suit customers’ requirements.
We are the home of the Next Generation Impactor™ (NGI™), a cascade impactor for testing Metered-Dose Inhalers, Dry-Powder Inhalers and other inhalable drug products. We also offer labor-saving, productivity-enhancing tools for recovering drug samples collected by a cascade impactor. We offer mensuration services for both the NGI and the Andersen Cascade Impactor and the full range of accessories for inhaler testing.
Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas and vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, and include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization....
The threat of terror in the form of chemical and biological warfare agents has been a reality globally since March 1995, when the Aum Shinrikyo sect killed 12 people and injured nearly 6,000 by releasing sarin nerve gas in the Tokyo subway system. More recently, the 2001 anthrax attacks in the USA was a wake-up call that the threat is real. Recent outbreaks of H1N1 and SARS posed threats of worldwide epidemics because air travel provides a means for these diseases to spread globally in less than 24 hours. A major...
If you make a living on chemical reactions, you know that accurate moisture, solids and ash content control is critical to a successful reaction. Whether your product is organic or inorganic, flammable or flame-retardant, exotic or commoditized, Computrac has an instrument that will help you make your process more productive, more reliable, and more profitable. The Computrac line of instruments can provide primary measurements for solids content, ash content, total volatile content, and water-specific moisture...
DART enables near effortless inspection of tablets, powder, and liquid formulations. Qualitative and quantitative analysis are completed by using commercially available LC/MS systems from all of the major mass spectrometry vendors. Rapid reaction monitoring is facilitated with the development of our Mobile DART-Acquity QDa platform which can move from laboratory to pilot plant in minutes enabling generation of high quality information in seconds to improve your decision making process.
The Spinsolve benchtop NMR spectrometer can be used to analyse crude oils, fuels and other petrochemical products. This can be used for chemometrics which is important for crude oil combinations and predicting product properties.
This technical note demonstrates the use of Laser Induced Breakdown Spectroscopy (LIBS) as an alternative technique for F analysis, which remains challenging for ICP based techniques.
Request this application note at http://appliedspectra.com/applications/application-notes.html
The nation has stockpiled thousands of cylinders and canisters of toxic and deadly chemical weapon agents, including mustard gas (HD), sarin (GB), tabun (GA), and V-agents. Most of these CWAs are stored at DOD facilities around the country and many have been in storage for years and years. As a consequence, DOD requirements specify that the stockpiles have to be monitored regularly for leakages to prevent release to the environment and exposure to personnel.
The highest purity of ammonia is a requisite chemical gas for the production of flat panel displays and for LEDs; the purity issue is one of achieving moisture levels at the ppb level, as in the case of epitaxial reactor applications. However, the problem requiring a solution derives in part from the fact that the FTIR spectra for moisture and ammonia overlap to the degree that the moisture peaks are masked by the ammonia peaks at high concentrations. As a result the moisture peaks cannot be used for quantitative...
Under pressure to do more with less budget? Your lab is not alone. Across the globe, analytical labs are being asked to provide better analysis and faster reporting in an increasingly budget-conscious business environment. ATL's LIMS is just the tool your lab needs to accomplish the impossible - produce quality, accurate analysis while keeping the corporate bean-counters happy.
For more information, see below and visit atlab.com/industries/chemical