Only show results in Virginia? Ok

chemical hazard Applications

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact. Water technology suppliers have the opportunity to tap into a market worth $768 billion.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the drinking-water application of MANTECH’s novel PeCOD® COD-testing system — does what no other technology has done before. It quickly and safely measures oxygen demand and the associated oxidative changes in organic matter in raw and treated drinking water, at low concentrations and without the use of hazardous chemicals.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges.  For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    GHS compliance

    Transition swiftly and seamlessly from your region`s SDS to the Globally Harmonized (GHS) system for classification of chemicals. Our easy-to-use, webbased GHS Wizard makes it simple for your SDS author to ensure labels and data sheets support safe handling and use of hazardous substances.

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Air sampling & monitoring systems for fire & police service

    Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real. Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Regulatory compliance for retail supply chains

    WERCSmart (Supplier, Merchandiser And Retailer Technologies) is an industry-leading retail program developed specifically to give retailers quick and easy access to accurate regulatory compliance and sustainability data. The program gives suppliers a secure, intuitive way to submit critical product and chemical composition data needed to compile a complete set of hazard communications data.

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) to US legislation on conflict minerals. The depth and amount of information that suppliers must access, evaluate, compile, integrate and disclose is growing exponentially.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Shredding solutions for hospital waste industry

    This category includes various products and materials collected in hospitals: hazardous waste (eg catheters, disposable gloves, test tubes, disposable gowns, material for dressing, etc.). lab hazardous waste as a result of the carrying out of research activities and bacteriological diagnostics (for example: land plates, contaminated culture, etc.). cutting waste (for example: needles, syringes, scalpels, etc.). unrecognizable organs and body parts empty containers (for example: of medicines, of disinfectants, of vaccines, food, beverage and infusion solutions) expired or unusable medicines, other cytotoxic and cytostatic chemical waste substances.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Filtration systems & solutions for nuclear industry

    Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable problems.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Air pollution control for soil remediation

    Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA).

  • Precision moisture analysis instruments for mercury detection for first responders

    Working on a hazardous materials team means being prepared for the unexpected, from toxic chemicals to unidentified powders to overturned trucks. Should “the unexpected” ever include mercury and mercury vapor contamination incident response, trust Jerome mercury vapor analyzers to keep your team and your community safe.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • AIR PURIFICATION

    Citto Activated Carbon 'Air Series' offers a range of standard, impregnated, and specialized activated carbon products for a wide spectrum of air purification applications. The dynamic product array of the Citto Activated Carbon 'Air Series' is developed to meet stringent emission control regulations as well as safety standards for emerging respiratory technologies effectively removing nuisance odors, volatile organics, and hazardous chemicals from air and gas streams.

    By Citto Corporation based in TORONTO, ONTARIO (CANADA).

  • Secondary disinfection treatment for commercial & institutional

    Waterborne illness from microbial growth in water distribution systems is a real threat to water safety. MIOX’s patented Mixed Oxidant Solution (MOS) chemistry for secondary disinfection can help eradicate biofilm that can harbor Legionella and other microorganisms without the use of Chlorine Dioxide. MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining steady disinfection residuals.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Hydrogen sulfide removal treatment for oil and gas industry

    The chemicals used for treating for H2S in the oil and gas industry can sometimes be just as hazardous as the H2S itself. MIOX wants to eliminate these hazardous chemicals and let oil & gas companies create their own safe chemistry on-demand as they need it. Whether it is high volume treatment, or low volume treatments in the middle of nowhere with no resources, we have a solution for your need.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Water Disinfection for Food and Beverage Water Treatment

    MIOX provides advanced chemical solutions to the food, beverage and farming industries for all water treatment applications including source water treatment, surface or groundwater, process water treatment, cooling towers on the facility, bottle and surface disinfection, and clean in place (CIP) for syrups and raw sugars. Our team designs custom solutions to deliver safe, effective, and economically attractive alternatives to minimize or eliminate the use of expensive and hazardous delivered chemicals.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you