chemical oil-water separation Applications

19 Results found
Only show results in Virginia?
OK
  • Keyword: chemical oil-water separation ×

Oil Water Separation / Water Treatment - Chemical Reduction

by Hudson Industries     based in Vienna, OHIO (USA)

Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

Chemical Water Treatment for membrane treatments

by Kurita     based in Ludwigshafen, GERMANY

Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

Wilsa ElectroWaveTM Conditioning - Non-chemical water conditioning, break emulsions, enhance recovery

by Hudson Industries     based in Vienna, OHIO (USA)

Hudson Industries (a licensed partner) is now offering the patented Wilsa ElectroWaveTM Conditioner (EWC) for non-chemical water conditioning that provides enhanced oil recovery up to 99.999% with the power to break difficult emulsions. The Wilsa Effect is targeted at polar fluids, such as water. The Wilsa EWC directly targets the surface and interfacial tension of water molecules which breaks emulsions and forces the water to reject foreign matter such as oil and suspended solids. Furthermore viscosity is greatly reduced which allows the now coalesced oil to exit the water column with less friction, thus Stokes Law is fundamentally enhanced and retention time is greatly reduced. Combine the Wilsa EWC with your existing separation equipment or pair it with Hudson Coalescing Separator for maximum oil recovery/ removal. Contact us today for more information about Hudson Separators and Wilsa ElectroWaveTM Conditioning.

Industrial solutions for chemical and petroleum industry

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

With expertise in water and wastewater treatment, oil/water separation, liquid/liquid and liquid/solids separation, WesTech works closely with professionals in the petroleum and chemical industries. We are able to move fast to provide proven solutions and process infrastructure that keep production up and product flowing.

Oil skimmers for petro chemical industry

by Ambar Oil Skimmers     based in Westwego, LOUISIANA (USA)

The Mop type Oil Skimmer has many submissions in refinery plants. Some applications are comprised of cooling ponds, waste water, storage tanks etc. Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water applications.

High performance filtration & separation system for amine

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the feed stream, or generated within it as a result of the chemistry of the system. These contaminants are typically addressed by means of particle filters and carbon adsorption.

Chemical filtration in water for the wastewater industry

by atech innovations gmbh     based in Gladbeck, GERMANY

In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

High performance separation system for silicones industry

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone resin.

High performance separation system for ethylene industry

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

Filtration in waste water treatments. disinfection

by Sistema Azud, S.A.     based in Alcantarilla, SPAIN

The cost and efficiency of the waste water treatment is directly linked to the amount of suspended solids in the water.
The addition of an AZUD System allows:

  • Increased efficiency of the treatment equipment.
  • Decreases the quantity of chemicals used.
  • Avoids the “shadowing effect” created by larger particles in UV disinfection systems.

Cooling systems for filtration

by Sistema Azud, S.A.     based in Alcantarilla, SPAIN

The installation of AZUD filtration equipments allows the reduction of the total solids in suspension in the water, and:

  • Helps to maintain an optimal efficiency of energy in the heat interchange process.
  • Reduce the accumulation of particles in the components of the cooling systems.
  • Reduce the growing of microorganisms. The higher or lower proliferation of these microorganisms is directly linked to the
  • higher or lower availability of organic nutrients which favour the development of the same.
  • When reducing the total quantity of suspended solids it is improved the efficiency in the application of chemical products to the treatment of water.
  • Decrease the frequency of maintenance labours.

Salt Water Disposal - Operational improvements and savings

by Hudson Industries     based in Vienna, OHIO (USA)

Adding Wilsa ElectroWaveTM technology to existing separation equipment at Salt Water Disposal Wells (SWD) or Salt Water Injection Wells (SWIW) has a profound impact on the amount of oil can be recovered without using chemicals. Additionally there is a host of operational improvements and savings that result from the Wilsa Effect. Oil free solids settle out faster for cleaner, clearer brine for injection. Cleaner brine means less injection pressure and fewer acid jobs in the formation. Pump packings last longer by reducing solids and abrasive elements from the brine. More targeted solids settling allows for less tank clean outs. All of this adds up to significant operational savings.

Activated Carbon Filtration for the Water Filtration Industry

by General Carbon Corp.     based in Paterson, NEW JERSEY (USA)

General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.


High performance separation system for fuel gas streams

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Fuel Gas Streams are frequently contaminated with liquid aerosols. The liquid exists as a stable and persistent “smoke” in the gas stream. The liquid contaminant can enter the gas stream through any one of a variety of events including – phase separation and condensation, compressor lube-oils from compression, chemical addition to pipelines (including corrosion inhibitors), and entrainment from overheads of contact towers.

Industrial

by DESMI A/S     based in Noerresundby, DENMARK

We have a specialist range of skimmers and systems to suit the requirements of the industries, including in-tank skimming. The removal of oil and chemicals from water within the industrial environment is a key requirement – not only due to increased legislation but also because it is considered a dependable and cost effective way to achieve the desired level of water purity. It can also increase the efficiency of existing installations, such as large scale API oil-water or parallel plate separators, without the need for expensive capex expansions or new builds. The DESMI skimmers are typically manufactured from high nickel alloys to resist ‘sour’ applications and can be hydraulic, air or low voltage drive. In applications that require ATEX or equal qualification, we can satisfy this requirement.

Enhanced Oil Recovery - Produced/ Impaired/ Wastewater

by Hudson Industries     based in Vienna, OHIO (USA)

WILSA® technology improves the efficiency of existing separation equipment in produced/ impaired water. The non-chemical ElectoWave Conditioning system supercharges Stokes Law to break emulsions, enhance coalescing, reduce viscosity and retention time. This allows traditional/ existing separators to function more efficiently and to either reduce or eliminated chemical programs used to achieve separation.

Environmental technology for gas cleaning industry

by Körting Hannover AG     based in Hannover, GERMANY

For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

BOD and COD Removal

by USP Technologies     based in Atlanta, GEORGIA (US) (USA)

Hydrogen peroxide (H2O2) has been used to reduce the BOD and COD of industrial wastewaters for many years. While the cost of removing BOD / COD through chemical oxidation with hydrogen peroxide is typically greater than that through physical or biological means, there are nonetheless specific situations which justify the use of hydrogen peroxide. These include: Predigestion of wastewaters which contain moderate to high levels of compounds that are toxic, inhibitory, or recalcitrant to biological treatment (e.g., pesticides, plasticizers, resins, coolants, and dyestuffs); Pretreatment of high strength / low flow wastewaters – where biotreatment may not be practical – prior to discharge to a Publicly Owned Treatment Works (POTW);Enhanced separation of entrained organics by flotation and settling processes; and Supply of supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure. http://www.h2o2.com/industrial/applications.aspx?pid=104&name=BOD-COD-Removal

Waste water treatment / Sludge management

by PBS Velká Bíteš, a.s.     based in Velká Bíteš, CZECH REPUBLIC

PBS Velká Bíteš develops and manufactures machines for the separation of solid and suspended particles from liquids. The so-called "Decanter Centrifuges" can be used for a wide range of applications: from separation of municipal and industrial sludge in waste water treatment plants, through food and chemical industries up to agriculture. In the area of separation, we offer not only the decanter centrifuges themselves, but also the related services, including servicing of third-party equipment.

Need help finding the right suppliers?

Let the XPRTs do the work for you