chemical process safety Applications
-
PremiumProcess Analytics - Chemical Processes
METTLER TOLEDO/INGOLD solutions cover a wide range of process conditions found in chemical processes. Our products master even most demanding chemical environments with high temperature and pressure - the industry proven design ensures high safety and reliability. Certificates as ATEX, FM, CSA, 3.1B are available with our products to comply with plant safety requirements. Our application solutions can be integrated into plant wide process control and asset management systems.
By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.
-
PremiumAutoChem - Process Safety
Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.
By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.
-
PremiumAir pollution control for the petroleum processing and petrochemical industries
The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
PremiumSolid/liquid separation for chemicals industry
ANDRITZ gives you access to a comprehensive range of technologies for solid/liquid separation, drying, and automation solutions for chemical processing applications. The systems are specifically designed to achieve product purity and plant safety in the most demanding applications.
By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA.
-
PremiumRecycling Solutions for the chemical and petrochemical industries
ANDRITZ gives you access to a comprehensive range of technologies for solid/liquid separation, drying, and automation solutions for chemical processing applications. The systems are specifically designed to achieve product purity and plant safety in the most demanding applications. The chemical and petrochemical industries require durable, safe, and efficient technology solutions which place unique demands on suppliers. Whether the application is for chemicals, petrochemicals, pharmaceuticals, coating pigments, or plant waste streams, ANDRITZ has products and solutions to improve production, efficiency, end product quality, and plant safety.
By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.
-
Gas Detection Solutions for Chemical Manufacturing
There is no one solution for gas detection for the Chemical Manufacture and Use industry. There are a wide variety of gases that need to be measured for personnel safety, environmental, and process control reasons. Boreal has a number of gas detection solutions tailor made for the Chemical Manufacture and Use industry. Boreal has experience working with most of the largest chemical companies in the world. With installations in over 45 different countries around the world Boreal is the clear choice in open-path, in-situ, and extractive gas detection measurements.
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
PremiumIndustrial air pollution control for the chemical and petrochemical industry
CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are often explosive mixtures, CTP systems have to be completed with special safety conduits and filters to help reduce hazards during continued operation.
By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.
-
PremiumWater treatment chemicals for the refinery and petrochemical industry
Highly complex processes in refinery and petrochemical plants demand the competent handling of operational facilities and products. Water and process treatment also have to meet these requirements in order to ensure plant and system safety. Kurita offers you precisely this security: with decades of experience, we advise and support you in the various fields of application. Take advantage of our know-how and our customer proximity.
By Kurita based in Tokyo, JAPAN.
-
PremiumAutoChem - Process Development and Scale-Up
Process Development in the chemical industry requires a profound and comprehensive knowledge of the processes involved and is governed by a triangular relationship between `Economy - Safety - Environment`.
By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.
-
Gas Detection Solutions for Hydrogen Fluoride (HF) Safety
Hydrogen Fluoride (HF) is a very useful chemical used in a variety of industries. However, HF is highly toxic with potential fatal consequences with exposure to humans, so facilities that make or use HF should exercise great care. Nevertheless, there is always the risk of leaks from process elements such as valves, pump seals and storage vessels. Tanker loading, transporting and unloading operations also provide opportunity for HF releases. Industrial processes that make or use HF typically have arrays of point sensors distributed throughout the unit. However, these sensors are maintenance intensive and have relatively slow response times. In addition, a point sensor will not detect an HF release unless it is located directly in the area of that release. Electrochemical HF sensors also respond to chlorine, ammonia, and sulfur dioxide, resulting in false alarms.
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
PremiumChemical Water Treatment for boiler water & heating systems
In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler system - feed water tank, boiler, steam and condensate system.
By Kurita based in Tokyo, JAPAN.
-
PremiumPTR-MS systems for petrochemical industry
Process monitoring in the petrochemical industry. Monitoring of syngas and other gas processes for safety, quality assurance and process optimization.
By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.
-
PremiumChemical water treatment for refinery
Deposits and corrosion as well as undesired emulsion, foam and toxic gases impact the operation and the occupational safety in refineries. Kurita provides tailored treatment concepts to increase the operational and the occupational safety. Our product lines and technologies are based on decades of experience in process treatment and they contribute to reduce your total operating costs.
By Kurita based in Tokyo, JAPAN.
-
PremiumLaboratory instruments solutions for pharmaceutical industry
Pharmaceutical analysis guarantees drug safety by providing information on the identity, content, quality, purity, and stability of pharmaceutical products using analytical chemistry. Metrohm offers you a broad range of instruments and applications for quality control and for monitoring and improving drug manufacturing. With myriads of pharmacopeia-compliant analysis methods, we are your qualified partner for all chemical-pharmaceutical analysis issues and analytical method validations. In accordance with international pharmacopeias and various guidelines, Metrohm offers you analysis for active pharmaceutical ingredients (APIs), excipients, impurities, pharmaceutical solutions as well as pharmaceutical starting materials, and finished pharmaceutical products (FPPs). Additionally, we provide numerous wet chemical methods for atline and online process control as well as inline monitoring methods for assuring cost-effective manufacturing processes that satisfy all regulatory demands.
By Metrohm AG based in Herisau, SWITZERLAND.
-
US Peroxide Rapid Response
By USP Technologies based in Atlanta, GEORGIA (US) (USA).
-
PremiumCompressed air, gas and vacuum solutions for process gas and coolant industry
The differences in compressor technologies can be found right where the demanding applications are. Where often highly critical processes gases and coolants are compressed. In the chemical, petrochemical, energy, food, or pharmaceutical industries. The demands on plant design, engineering, documentation and worldwide service in those industries are often just as high as the safety and environmental guidelines to be followed. For over 150 years, AERZEN has been developing a unique expertise for these industries. Beginning with Europe’s first rotary lobe compressor, which we developed in 1868. Our history has given rise to a unique knowledge pool of technological advances and know-how. And we have focused it primarily on our PGD centre – the AERZEN Process Gas Division.
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
PremiumAutoChem - Organic Synthesis
Today, pharmaceutical and fine chemical companies face major challenges posed by globalization, environmental regulation, and shortened product life cycle that affect all aspects of their business. The research and development of an optimized chemical synthesis route must be carried out in less time and with less chemical waste to ensure a robust and economic process that can be efficiently scaled to manufacturing while meeting constraints related to product yield and purity, process and worker safety, and environmental concerns.
By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.
-
Premium
VOCs gas leak detection
An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threat
By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.
-
Premium
VOCs Fugitive emissions detection
An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats
By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.
-
PremiumEDXRF spectrometers for cosmetics industry
During the manufacturing process, cosmetic products need to be chemically analyzed to ensure conforming to product specification and safety regulations, as well as achieving cost-effectiveness in the manufacturing process. Using ED-XRF allows measuring a wide range of elemental concentrations such as C(6)-Fm(100), without a need for sample preparations(heating or destroying the sample). Samples can be measured in the form of loose powders or powders pressed into pellets, and are made ready for measuring within seconds.
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you