chemical workplace hazard Applications in Europe

  • Water Disinfection for Industrial Water Treatment

    MIOX’s patented Mixed Oxidant Solution (MOS) or Hypochlorite (HYPO)chemistries for cooling tower and cooling loop water disinfection improves safety, lowers general corrosion rates, increases performance, and saves money. The unique qualities of MOS lowers corrosion rates by 80% in copper and 50% in steel, resulting in a reduction of downtime, maintenance, and expense. Additionally, MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining...

  • Secondary disinfection treatment for commercial & institutional

    Waterborne illness from microbial growth in water distribution systems is a real threat to water safety. MIOX’s patented Mixed Oxidant Solution (MOS) chemistry for secondary disinfection can help eradicate biofilm that can harbor Legionella and other microorganisms without the use of Chlorine Dioxide. MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining steady disinfection residuals.

  • Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company Distributor in UNITED KINGDOM.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Leak detectors for Oil & gas industry

    The Oil and Gas industry pose many potential risks to workforce, workplace and the environment. Hazardous gas emissions are prevalent during production and processing operations with exposure to benzene being a significant concern.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Hose and tube pumps for Chemicals industry

    Seal-less chemical transfer and metering pumps; When pumping hazardous chemicals it is important to use a leak free pump that resists the chemical’s corrosive effects.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration,...

    By Verisk 3E Office in Copenhagen, DENMARK.

  • Premium

    Gas analyzers and monitoring systems for First response

    Accidents involving chemicals and other hazardous materials (HAZMAT) require fast and accurate gas measurements as part of the first response. Accidents are by nature unexpected and unpredictable, so the equipment used for the first response in these situations should be flexible enough to work in a wide variety of different scenarios. CBRN Units that are tasked with protecting the public from chemical, biological, radiological and nuclear threats also need similar solutions for identifying and mitigating...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Oil Mist and VOC Collection

    Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory...

    By Diversitech Distributor in Bishops Waltham, UNITED KINGDOM.

  • Premium

    Measurement of methyl ethyl ketone, chloroform & carbon tetrachloride in air for remediation & super fund sites

    The Series 8900 Analyzer provides direct measurement of Methyl Ethyl Ketone, Chloroform and Carbon Tetrachloride in ambient air. This instrument is utilized for remediation and Super Fund sites and to monitor workplace exposure limits.

    By AMETEK MOCON - Baseline Distributor in Essen, GERMANY.

  • Measurement solutions for hospital workplace exposure monitoring

    In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Soil Remediation Plants for Soil and Groundwater Industry

    Contaminated soil and building-rubble can be efficiently treated with VacuDry technology, including a diverse range of toxic and hazardous substances. VacuDry units also have low emissions and low power consumption, making on-site treatment with our mobile units both economically and environmentally sound.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Environmental solutions for the waste incineration industry

    Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...

    By Dürr MEGTEC, LLC Office in Leicestershire, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you