Only show results available in Virginia? Ok

chlorination system Applications

  • Premium

    Ultraviolet disinfection systems for the de-chlorination industry

    The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will usually specify an upper limit to ensure a suitable life of the membrane. As a result, it is usual to use a method of dechlorination upstream of the RO or EDI system.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Commercial uses of chlorine dioxide for agriculture

    Irrigation Systems: A common problem encountered in all irrigation systems is growth of micro-organisms in the irrigation pipes causing poor flow, blockages and the potential for the spread of disease-causing organisms throughout the irrigated area, particularly fungal diseases. The micro-organisms flourishing in irrigation pipes include bacteria and fungi and, if sufficient light is present, algae. Irrigation pipes provide an ideal environment for the establishment of biofilm on the inside of the pipes.

    By NW Solutions based in Perth, AUSTRALIA.

  • Legionella Control with Chlorine Dioxide

    Chlorine Dioxide has been shown to be extremely effective in the control of legionella bacteria and the prevention of Legionnaires’ Disease and Feedwater’s patented Activ-ox® system is the easiest and safest way to treat drinking, domestic and cooling water with chlorine dioxide.

    By Feedwater Ltd based in Moreton, UNITED KINGDOM.

  • Chlorine Level Measure Meter

    External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 jilina@sx-sk.com Cell: 0086 15809274235 Sonar Technology, External liquid indicator uses the principle of sonar ranging collecting the sonar signal by the special probe fixed outer wall of the tank. Pioneering the Two-Wire System, Overcoming various technical dilemmas, two-wire system External liquid level indicator has been successfully developed. Easily Installation Trial run and Maintenance, No effect on production, No need clean the tank when installing, trial running and Maintaining. Auto-diagnosed and collation, Accuracy is 0.1%

  • Ozone System for Agriculture, Food and Wine

    Since the early 1990s wineries have been experimenting with ozone as an alternative to sanitizers like chlorines and sulfur dioxide. This has provided added benefit of reducing water usage, power consumption, and chemical treatment.

    By Piper Environmental Group, Inc. based in Castroville, CALIFORNIA (USA).

  • Premium

    Ultraviolet disinfection systems for the process water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total Organic Carbon (TOC) from ultra pure rinse water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Water treatment for water distribution systems

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor control and will oxidize sulfides. Chlorine dioxide is also effective at oxidizing iron and manganese compounds.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Aerobic Septic System Ozone Disinfection Devices

    Our method is the use of Ozone generation. Ozone is a strong oxidizer that is up to 3000 times for effective than Chlorine. Ozone is not stored, Ozone is generated on site. With this method, this offers the homeowner a means of disinfection that is completely hands free. Ozone is very safe for the environment, with the only bi-product being Oxygen. Ozone is generated by bonding 3 atoms of Oxygen to form Ozone. Once the Ozone comes in contact with a virus or bacteria, the Ozone attacks the nucleus of the cell and destroys the bacteria or virus. Ozone will make this kill up to 3000 times faster than Chlorine. Once, the Ozone attacks the bacteria it reverts back to Oxygen. Ozone is not stored, Ozone has to generated on site.

    By Aerobic Guard, LLC based in Waxahachie, TEXAS (USA).

  • Premium

    Early Warning Systems for Drinking water

    Drinking water supply and distribution systems around the world (a critical and interdependent component of a nation’s infrastructure) are vulnerable to both intentional and accidental contamination. Unusual water quality may serve as a warning of potential contamination. The available physico-chemical sensors utilize general water quality parameters, such as free chlorine, oxidation reduction potential (ORP), total organic carbon (TOC), turbidity, pH, dissolved oxygen, chloride, ammonia, nitrate to detect the contamination. Generally, one or more of these water quality parameters will change due to the injection of a contaminant. However, no single chemical sensor responds to all possible contaminants nor can they give any indication of the potential toxicity of complex mixtures.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Ultraviolet disinfection systems for the swimming pools industry

    Ultraviolet disinfection is now an established method of water treatment for Swimming Pools, Spas, Hydro Pools, Splash Pads and Water Features, and has become the preferred treatment choice for a number of leading international leisure brands. atg UV`s range of treatment systems are proven to improve the swimming pool environment by improving water quality, air quality and safety, leading to increased customer satisfaction. UV systems not only provide disinfection against the 17 known chlorine resistant micro-organisms, such as Cryptosporidium and Giardia, which have a thick outer membrane making them highly resistant to traditional Chlorine disinfection, UV also destroys chloramines. Chloramines are formed when free chlorine reacts with organics, such as sweat, body fats and urine, brought into the pool environment by bathers.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Ultraviolet disinfection systems for the drinking water inspectorate

    With atg UV systems treating in excess of 2500 m3/hr daily, Ultraviolet disinfection is no longer an ‘emerging` technology.  A number of Water Treatment Works across the world are now investing heavily in Ultraviolet technology as the threat of chlorine resistant parasites, such as Cryptosporidium and Giardia, continue to pose a serious risk to water companies and their customers. To this end, in the UK, the DWI have issued their guidelines for UV operation and system selection to the UK water industry.  A key feature of their guidance is UV system validation.  Validation refers to a series of 3rd party testing to ensure the performance of an Ultraviolet system design under a range of operating environments.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Ultraviolet disinfection systems for the water parks industry

    As water features, wave machines, flumes and splash pads raise the fun factor in swimming pools, traditional methods of disinfecting water, using chlorine, are causing problems for operators and customers alike. Higher water temperatures and increased turbulence in leisure pools requires increased dosages of chlorine, leading to pool users complaining of burning eyes, red or itchy skin and an over powering chlorine smell throughout the facility. In some extreme cases the fabric of the building has also been attacked through corrosive condensation.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Ultraviolet disinfection systems for the offshore potable drinking water

    atg UV Technology are the market leader for UV systems designed to treat potable drinking water for offshore crew water supplies. UV is now the disinfection technology of choice, providing a simple chemical free solution to protect against all known bacteria and harmful microorganisms, including chlorine resistant microorganisms such as Cryptosporidium and Giardia. Available as skid mounted, duty / standby solutions, atg UV Technology’s offshore UV drinking water packages are included as part of the on board water maker, typically installed following desalination by an RO package or Flash Evaporator.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Ultraviolet disinfection system for aquaculture & pool & water park

    For UPVC UV sterilizer seriers for Aquaculture & swimming pool UV sterilizer system is the most reliable , effective and safe water disinfection method. The reasons are UV posses the fast reaction time, no chemical required and easy operation method compare with chlorination and other chemical disinfection method . The UV disinfection technology is growing dynamically and broadly used on water ,air and material surface throughout the world. Applications: *Industrial Wastewater and Reuse *Air condition Cooling water * water Re-circulation *Swimming pool & Spa & Recreation water… * Fish & Shrimp Hatcheries * Aquaculture sea water application Features: 1. Reactor chamber is made of UPVC SCH 80 corrosion-resistant material |2. Multi-lamp array for Optimum performance 3. Watertight design for wet environment. 4. High efficient electronic ballast to deliver precise input power to lamp. 5. High transmission of high-purity quartz for high UV lamp performance. 6. High performance UVC germicidal lamp, low use of space 7. Easy installation and maintenance operations 8. Single closed (One Open end) high transmission quartz tube, easy to remove.

    By Enfound Enterprise Co., Ltd. based in Taipei, TAIWAN.

  • Ozone/UV systems for swimming pool water treatment

    Studies have proven that chlorine use has negative consequences due to the formation of byproducts, i.e. chlorinated organic compounds and chloramines. Irritation of eyes and mucous membranes, drying out the skin as well as “chlorine smell” are well known troubles. However, these byproducts also accelerate the corrosion in pool halls and significant risk is given by their toxicity (chloramines, combined chlorine) and/or carcinogenicity. Higher rate of asthma prevalence is one of the consequences. These are the reasons why the combined chlorine content - as a marker of chlorination byproducts presence - is to be monitored and why its limit values are specified by authorities. To meet the limits can be tedious and expensive because more water has to be changed and heated up. Chlorine disinfection is not sufficient to prevent infections caused by some waterborne pathogens as dangerous protozoan parasites Cryptosporidium parvum and Giardia lamblia.

    By LIFETECH based in Brno, CZECH REPUBLIC.

  • Premium

    Petrochemical

    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Water treatment solutions for swimming pool water treatment

    Modern disinfection procedures improve swimming enjoyment. Our UV and ozone systems make swimming pool water hygienically pure. In addition to conventional disinfection with chlorine, unpleasant smells are also avoided, for example.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Lubricating oils for oil & gas industry

    Lubricating oils contain chemical additives that give the oil a greater in-service life. These additives contain a range of elements such as Calcium, Zinc, Phosphorus, Magnesium, Chlorine, Molybdenum etc whose concentration need to be measured as part of a quality control/assurance system to demonstrate conformance to specification.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you