chlorine dioxide monitor Applications in Latin America

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in BELIZE.

  • Premium

    Portable and fixed gas analysers for incubator verification

    Geotech manufactures and supplies portable carbon dioxide monitors for use in incubator laboratories to verify CO2 in IVF and stem cell research applications.

    By QED Environmental Systems Ltd. Distributor in Valinhos, BRAZIL.

  • Premium

    Total sulfur measurement for sulfur compounds in CO2 for food & beverage industry

    The BevAlert Model 8900 provides a total sulfur measurement for sulfur compounds in Carbon Dioxide. The measurement includes organic sulfides, Sulfur Dioxide, Carbonyl Sulfide, and Hydrogen Sulfide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor sulfur compounds in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline Distributor in Buenos Aires, ARGENTINA.

  • Premium

    Measurement of vinyl chloride, acetaldehyde, methanol, and benzene in CO2 applicaitons for gas manufacturer & food and beverage industry

    The BevAlert Model 8900 provides direct measurement of Vinyl Chloride, Acetaldehyde, Methanol, and Benzene (VCAMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline Distributor in Buenos Aires, ARGENTINA.

  • Premium

    Measurement of acetaldehyde, benzene, toluene, ethylbenzene, & xylenes in CO2 applications for food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Benzene, Toluene, Ethylbenzene, and Xylenes (ABTEX) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace volatile organic compounds in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline Distributor in Buenos Aires, ARGENTINA.

  • Carbon Dioxide (CO2) monitoring

    Carbon dioxide (CO2) is emitted in a number of ways. It is emitted naturally and through human activities like the burning of fossil fuels. Carbon dioxide (CO2) is generated as a by-product of the combustion of fossil fuels or the burning of vegetable matter, among other chemical processes. Small amounts of carbon dioxide are emitted from volcanoes and other geothermal processes.

    By Ecotech Pty Ltd Distributor in ARGENTINA.

  • Premium

    High quality gas sensor solutions for horticulture

    Ensuring reliable and accurate carbon dioxide measurement. With accurate and reliable carbon dioxide monitoring being an important part of horticultural climate control, Edinburgh Sensor’s Guardian range includes dual wavelength non-dispersive infrared sensor technology with built-in temperature correction. This ensures reliable and accurate carbon dioxide measurement together with long term stability.

    By Edinburgh Sensors Ltd Distributor in Campinas, BRAZIL.

  • Premium

    Carbon dioxide mass flow meters flow solutions

    Thermal mass flowmeters are ideal for Carbon Dioxide metering and mass flow control. Sierra specializes in accurate mass flow measurement and/or control of CO2 gas. Applications range from general industrial process control across numerous industries to Green House Gas monitoring requirements and general research.

    By Sierra Instruments, Inc. Distributor in San Juan, PUERTO RICO.

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG Distributor in PERU.

  • Premium

    Emissions Monitoring

    The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium smelters.

    By Opsis AB Distributor in Ciudad de México, MEXICO.

  • Sulfur Dioxide (SO2) monitoring

    Sulfur Dioxide (SO2) is the product of the combustion of sulfur compounds and causes significant environmental pollution. The main source of sulfur dioxide SO2 in the environment are from various industrial processes such as the burning of coal in power stations, the extraction of metals from ore and combustion of fuel within automobiles.

    By Ecotech Pty Ltd Distributor in ARGENTINA.

  • Total Sulfur monitoring

    Total Sulfur includes all the gases described within total reduced sulfur, as well as sulfur dioxide as these compounds are oxidised forms of sulfur. Exposure to sulfur dioxides, and other reduced sulfur based compounds can cause many harmful effects in humans including headaches, general discomfort up to death in large doses. Those with impaired heart or lung function and asthmatics are at increased risk. Sulfur dioxide, one of the major pollutants, is absorbed by soils and plants and captured within and below...

    By Ecotech Pty Ltd Distributor in ARGENTINA.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB Distributor in Ciudad de México, MEXICO.

  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB Distributor in Ciudad de México, MEXICO.

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex...

    By Codel International Ltd Distributor in São Paulo, BRAZIL.

  • Premium

    Carbon Dioxide Monitoring for Indoor Air Quality

    Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by...

    By Edinburgh Sensors Ltd Distributor in Campinas, BRAZIL.

  • Premium

    Raw-gas monitoring for scrubber optimizing

    The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing material.

    By Opsis AB Distributor in Ciudad de México, MEXICO.

  • Premium

    High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic gas is a mixture of carbon monoxide, carbon dioxide, methane and other gases that is required for hardening or carburising of steel. By carefully controlling the amounts of each gas and the temperature in the treatment furnace, the steel surface can be hardened to provide long lasting components such as gears and tools.

    By Edinburgh Sensors Ltd Distributor in Campinas, BRAZIL.

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH Distributor in Buenos Aires, ARGENTINA.

  • Premium

    Methane and Carbon Dioxide Sensing for Biogas Applications

    Application: Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to...

    By Edinburgh Sensors Ltd Distributor in Campinas, BRAZIL.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you