Only show results available in Virginia? Ok

chlorine dosing Applications

  • Premium

    Dosing pumps for water and wastewater treatment industry

    Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic or Kalkmilch), caustic soda, powder activated carbon and polymers, sludge transfer, filter press feeds.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Potable water treatment

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor control and will oxidize sulfides. Chlorine dioxide is also effective at oxidizing iron and manganese compounds.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor control and will oxidize sulfides. Chlorine dioxide is also effective at oxidizing iron and manganese compounds.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment for water distribution systems

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor control and will oxidize sulfides. Chlorine dioxide is also effective at oxidizing iron and manganese compounds.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Odor Scrubbers Applications with Hydrogen Peroxide

    Hydrogen Peroxide as a Replacement for Sodium Hypochlorite Hydrogen peroxide may be used in both mist scrubbers and packed tower scrubbers as a replacement for sodium hypochlorite (bleach). Like bleach, the process involves two concurrent mechanisms: 1) absorption of the odors (H2S) into the alkaline scrubbing solution; and 2) oxidation of the absorbed sulfide in solution. Step 1: H2S + NaOH → NaSH + H2O Step 2: 4H2O2 + H2S → H2SO4 + 4H2O Typical dose ratios are 5 parts H2O2 per part H2S or, when used in place of bleach, one gallon 50% H2O2 for every 10 gallons of 15% sodium hypochlorite (NaOCl). This generally translates into a break-even cost scenario. Sufficient caustic soda (NaOH) is added to maintain a pH of 10.0 - 10.5 in the scrubbing solution. There is also in practice a process which uses H2O2 in series with bleach to scrub composting odors. This process relies on a series of three packed tower scrubbers: the first is a pH neutral water wash (to remove ammonia and amine odors); the second uses a conventional caustic/bleach solution in which the bleach is purposely overdosed (to oxidize the complex organic sulfur odors); and the third uses a caustic/H2O2 solution (to remove the unreacted chlorine vapors carried over from the second stage). H2O2 + HOCl → HCl + H2O + O2 Typical dose ratios are 0.5 parts H2O2 per part hypochlorite (OCl-), with sufficient caustic soda (NaOH) added to maintain a pH of 8.5 in the scrubbing solution.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you