Only show results in Texas? Ok

chlorine level Applications

  • Chlorine Level Measure Meter

    External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 jilina@sx-sk.com Cell: 0086 15809274235 Sonar Technology, External liquid indicator uses the principle of sonar...

  • Chlorine dioxide tablets

    The importance of drinking water quality for the production and performance of poultry has become one of the most important management tools. Without an adequate supply of good quality water, bird performance will be impacted. The key is not just the adequate supply of water, but good quality water. One prime factor that determines the wholesomeness of water is its microbial quality. Therefore, it should be of primary concern for production personnel and poultry producers to know the microbial quality of water...

    By GlobalEx Official based in REPUBBLICA DI SAN MARINO, ITALY.

  • Premium

    On-site chlorine and sodium hypochlorite generation systems for the Textile industry

    Klorigen™ systems generate sodium hypochlorite at the same high quality and 10-15% concentration levels as available from bulk commercial suppliers.

    By Electrolytic Technologies Systems LLC based in North Miami Beach, FLORIDA (USA).

  • Premium

    Online monitoring solutions for the determination of chlorine in hydrochloric acid

    Chlorine levels in liquid hydrochloric acid (HCl) are precisely and safely monitored by means of AppliTek’s EZ-HCl process analyzer. On-line measurement of chlorine in liquid HCl guarantees the purity of the end product. An additional possible reason for the measurement is that chlorine is an indicator for the amount of excess hydrogen in the synthesis of hydrochloric acid.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of impurities in dry chlorine

    The purpose of determining impurities in dry chlorine (after compression) is a quality control measure to avoid contamination and off-spec product batches. Alternatively, chlorine purity can also be determined by measuring absolute levels of chlorine in dry chlorine, by means of multi-wavelength UV analysis.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for fast determination of hydrogen in dry chlorine

    Fast determination of hydrogen in dry chlorine provides an early warning system against elevated levels of hydrogen, thereby protecting the chlorine production plant against hydrogen explosion incidents. AppliTek’s analyzer system for fast determination of hydrogen in dry chlorine can be considered as Best Available Technology (BAT). However, it can never replace a system for determination of hydrogen in wet chlorine since it meets other needs in process control than those for wet chlorine. Even a tiny...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for the fast determination of hydrogen in wet chlorine

    The purpose of fast determination of hydrogen in wet chlorine is to set up an early warning system against high hydrogen levels, thereby protecting the chlorine production plant against hydrogen explosion incidents. The hydrogen concentration in wet chlorine is very critical, especially for membrane and diaphragm cell type production of chlorine. A breakthrough of hydrogen in the chlorine by membrane or diaphragm damage can occur within a few seconds. Depending on the concentration, a mixture of H2 and Cl2 gas...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    On-site chlorine and sodium hypochlorite generation systems for Bleach manufacturing solutions

    Klorigen™ generators are ideally suited to commercial, municipal or industrial bleach manufacturing, as they are capable of generating the same ultra-pure sodium hypochlorite with the same high quality and 10% to 15% concentration levels as commercial bulk-delivered product.

    By Electrolytic Technologies Systems LLC based in North Miami Beach, FLORIDA (USA).

  • Premium

    Determination of chlorate, perchlorate, and chlorite ions in drinking water including bottled water

    Introduction Chlorination remains the most widespread way of disinfecting water in the world. Its flaws are: high toxicity of chlorine and other chlorinating reagents, also formation of various chlorine-containing compounds, including chlorite-, chlorate, and perchlorate anions. Maximum permitted levels (MPL) of these components are established in WHO Guidelines for drinking water and other regional and national regulations.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Online monitoring solutions for the determination of calcium and magnesium in hydrochloric acid

    The purpose of monitoring calcium and magnesium levels in hydrochloric acid is to control brine acidification in chlorine electrolysis, which can be precisely monitored by means of AppliTek’s UPA Universal Process Analyzer.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of oxygen in vent gases

    The purpose of determining oxygen in the chlorination process is to control the O2/C2H4 ratio in the reactor in order to keep oxygen levels outside flammability limits. The on-line analyzer system uses selective and fast oxygen measurement by means of a paramagnetic analyzer with corrosive resistant measuring chamber.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Algae control

    Excessive algae growth can throw even the best water treatment processes out of balance. Algae can clog intake screens, fluctuate pH levels, increase chlorine demand, and negatively affect the taste and smell of water. By blocking sunlight within water treatment tanks, you can stop algae growth, reduce chemical usage, and minimize the formation of disinfectant by-products (DBPs). Temperature is better controlled and maintenance associated with algae cleaning is simplified. The results? Better water treatment and...

    By Geomembrane Technologies, an Evoqua brand based in Fredericton, NEW BRUNSWICK (CANADA).

  • Potable water treatment

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment for water distribution systems

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment for cooling towers

    Controlling and preventing the growth of microorganisms in a cooling tower is extremely important and required to keep the system running at optimal levels. The presence of microorganisms will cause the system to breakdown and decreases the efficiency of the heat transfer. Typically oxidizing biocides such as chlorine and bromine have been used to treat cooling water. Unfortunately these chemicals are highly reactive with other chemicals and microbiological species found in the water. Chlorine dioxide however is...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment for legionella prevention and control

    Whether you find yourself in a hotel bath room, cruise ship cabin, hospital, office building, industrial plant, greenhouse, car wash facility or your own hot tub, the combination of certain temperature levels, stagnant water and the presence of biofilm in water systems is a potential recipe for disaster: an outbreak of Legionnaires’ disease. An outbreak of Legionnaires’ disease is often the result of negligence, having legal repercussions for responsible parties. Because of its chemical and biocidal...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you