Only show results available in Connecticut? Ok

chlorine test Applications

  • Online monitoring solutions for determination of moisture in dry chlorine

    The purpose of determination of moisture in dry chlorine is threefold: prevent corrosion, prevent formation of ferric chloride and control the overall drying process. AppliTek offers two different solutions for determination of moisture: one traditional method by means of an amperometric phosphoric pentoxide (P2O5) electrochemical cell, or a more advanced technique based on tunable diode laser technology (TLDS). Both analyzer systems are installed in a compact protective corrosion resistant cabinet.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for determination of oxygen in dry chlorine

    Levels of oxygen in dry chlorine in hydrochloric acid synthesis are monitored by means of an on-line analyzer system that can be equipped with two different measuring technologies: Alternating Pressure Paramagnetic or Tunable Diode Laser (TDL) analyzer system.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for the determination of chlorine in dry chlorine

    Levels of chlorine in dry chlorine in hydrochloric acid synthesis are monitored by means of AppliTek’s multi-wavelength UV analyzer system. Hydrochloric acid or HCl is one of the primary products of the chlor-alkali industry and commonly produced by the exothermic reaction of hydrogen and chlorine inside a burner. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control HCl...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for determination of impurities in dry chlorine

    The purpose of determining impurities in dry chlorine (after compression) is a quality control measure to avoid contamination and off-spec product batches. Alternatively, chlorine purity can also be determined by measuring absolute levels of chlorine in dry chlorine, by means of multi-wavelength UV analysis.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for determination of hydrogen in dry chlorine

    Levels of hydrogen in dry chlorine are monitored in hydrochloric acid synthesis by means of AppliTek’s multi-wavelength IR analyzer system. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control the HCl synthesis. Each of these on-line analyzer systems has been selected to control a specific part of the burner, by using techniques such as multi-wavelength infrared, thermal...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for the fast determination of hydrogen in wet chlorine

    The purpose of fast determination of hydrogen in wet chlorine is to set up an early warning system against high hydrogen levels, thereby protecting the chlorine production plant against hydrogen explosion incidents. The hydrogen concentration in wet chlorine is very critical, especially for membrane and diaphragm cell type production of chlorine. A breakthrough of hydrogen in the chlorine by membrane or diaphragm damage can occur within a few seconds. Depending on the concentration, a mixture of H2 and Cl2 gas...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for fast determination of hydrogen in dry chlorine

    Fast determination of hydrogen in dry chlorine provides an early warning system against elevated levels of hydrogen, thereby protecting the chlorine production plant against hydrogen explosion incidents. AppliTek’s analyzer system for fast determination of hydrogen in dry chlorine can be considered as Best Available Technology (BAT). However, it can never replace a system for determination of hydrogen in wet chlorine since it meets other needs in process control than those for wet chlorine. Even a tiny...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for fast determination of oxygen in wet chlorine

    The purpose of fast determination of oxygen in wet chlorine is twofold: verification and control of membrane oxygen permeation, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for fast determination of oxygen in dry chlorine

    The purpose of fast determination of oxygen in dry chlorine is to verify the chlorine oxygen specifications, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for the determination of chlorine in hydrochloric acid

    Chlorine levels in liquid hydrochloric acid (HCl) are precisely and safely monitored by means of AppliTek’s EZ-HCl process analyzer. On-line measurement of chlorine in liquid HCl guarantees the purity of the end product. An additional possible reason for the measurement is that chlorine is an indicator for the amount of excess hydrogen in the synthesis of hydrochloric acid.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for the determination of chlorinated organics in water

    Determining chlorinated organics in waste water of the oxychlorination process is for reasons of environmental compliance. The on-line analyzer system uses a scrubber system where a carrier flow is bubbling through the water. The vapor phase is measured by a Flame Ionization Detector (FID) and is a measure for chlorinated organics of the water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Online monitoring solutions for determination of residual chlorine in liquid phase EDC

    The purpose of determining residual chlorine in liquid EDC (ethylene dichloride) is to protect decrease risk of corrosion and damage to production units downstream. For all other analytical solutions in the chlorination process, please browse the On-line Analyzers Suite under Products & Solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you