Only show results available in Connecticut? Ok

clean air Applications

  • Premium

    Air pollution control solution for chemical industry

    The chemical process industry has been the Clean Air Group, LLC primary market since the Company’s inception in 1917. Our experience with a multitude of chemicals and processes is the foundation of the Clean Air Group, LLC expertise in wet scrubbing. Clean Air Group, LLC broad experience runs from the treatment or relatively simple acid gases to exotic and severely toxic substances including NaCN, HCN, Phosgene and Arsine.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control solution for solar-grade poly-silicon sector

    The Clean Air Group, LLC is the go to expert in controlling Silane, Tetra and Tri Chloro Silane gasses released during low cost continuous polysilicon production for solar grade silicon.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Gas analyzers for clean air room monitoring

    The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of medicines.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Air pollution control solution for fiber optics sector

    The manufacture of fiber optics involves the integration of various metal compounds to assist with the refraction of light within the fiber. Production of fiber optics create gaseous and sub-micron particulate emissions that are extremely valuable to recapture. A major fiber optic manufacturer has purchased multiple scrubber systems from the Clean Air Group, LLC to not only meet air emission standards but to capture this valuable product. Not only has the Clean Air Group, LLC APC system reduced the customer’s...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control solution for medical sector

    Sterilization of medical instruments is required in the medical community. Either oxidizers or scrubbers have been used to control Ethylene Oxide (EtO), a gas typically used in the sterilization process. The Clean Air Group, LLC has become the recognized leader in EtO scrubbing with numerous installations at various sterilization facilities. Medical waste incinerator flue-gas treatment is another area of the Clean Air Group, LLC expertise.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control solution for pharmaceutical industry

    The Clean Air Group, LLC has provided multi-stage scrubbing packages to most of the top multi-national pharmaceutical companies for both production process and pilot pharmaceutical process off-gases. These specialized systems are design to accommodate wide variations in operating conditions and many different pollutants. The Clean Air Group, LLC has provided venturi scrubbers for particulate removal and packed towers for water soluble VOC removal from tablet making processes.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control solution for petro-chemical industry

    The Clean Air Group, LLC has provided many scrubbers (venturi type, ejector type, packed towers) for the chemical plant area of refineries. These have treated pollutants such as elemental sulfur, maleic anhydride, pthalic anhydride, ethylene oxide, hydrogen sulfide, etc. Our venturi scrubbers can be effectively utilized to handle the off-gases from FCCUs. Other specialized applications (for instance using Stretford Solution in an Ejector scrubber for high efficiency H2S removal) are not unusual for Clean Air...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control solution for oil and gas industry

    A variety of refining and gas field sweetening scrubbing applications have long been a staple application. The Clean Air Group, LLC has been recognized as a preferred vendor for a leading refinery process licensor for the FCCU regeneration gas effluent clean-up. Here, particulates and HCl and Cl2 corrosive gasses are effectively scrubbed at ultra high temperatures, protecting downstream equipment.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control solution for aerospace industry

    The Clean Air Group, LLC has designed gas cleaning equipment for rocket engine emissions for the Mercury and Apollo space mission programs as well as for Polaris and ICBM rocket fuel destruction. During the 1980’s, the Company was the sole source for the Strategic Defense Initiative (SDI) program to simulate outerspace using our Process Vacuum and Air Pollution control technology.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Metals & mining solutions for the aluminum sector

    The primary metals manufacturing industry includes aluminum production. A variety of clean air solutions are required for capturing, conveying, and collecting emissions from aluminum rolling mills, including fume exhaust, ventilation and process cooling systems. The aluminum industry also requires technologies for product recovery, along with dampers and expansion joints, and pumps and valves.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Metals & mining solutions for the iron & steel industry

    The primary metals manufacturing industry includes iron & steel production. A variety of clean air solutions are required for capturing, conveying, and collecting emissions from steel rolling mills, including fume exhaust, ventilation and process cooling systems. The iron & steel industry also requires technologies for product recovery, along with dampers and expansion joints, and pumps and valves.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Air pollution control solution for water treatment industry

    Odor control via the use of oxidizing reagents can be effectively accomplished using the Clean Air Group, LLC counter current packed towers. Whether it is H2S, NH3, both or other odorous compounds we have the scrubber technology or absorber technology to satisfy treatment needs.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Air pollution control solution for pulp & paper industry

    Applications in pulp and paper include controlling particulate and VOC emissions from particle board production; sub-micron ammoniated compounds control; sulfur based emission controls; thermal oxidizer pretreatment; and acid mist control. Scrubbers are extremely effective with high removal efficiencies at low pressure drops. Additionally, the Clean Air Group, LLC supplies counter current packed towers for TRS removal, odor removal, Cl2 and ClO2 treatment.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Structured packings for gas treatment and exhaust air cleaning

    Use in gas scrubbers and bioscrubbers. We develop and produce structured packings that can be used in chemical/physical processes (gas scrubbers) and biological processes (bioscrubbers).

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY.

  • Premium

    Engineered clean air solutions for military & defense applications

    Between manufacturing, MRO, and prototyping R&D, you don’t have time to rearrange your entire facility with the dedicated space and ductwork to shield your employees from airborne hexavalent chromium and VOCs generated during sanding and painting operations. What if you could defend against these air hazards with a portable clean air solution that moves with your manufacturing changeovers and alternating finishing and coating tasks? Duroair’s custom-engineered indoor air filtration systems do just...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for metal fabrication applications

    Whether you’re cutting, welding, coating, grinding, or sanding, every metal fabrication task produces dust and fumes that can threaten your employees’ safety, derail productivity, increase maintenance costs, and place you in directly in the EPA’s crosshairs. Oil mist and dust particles can settle into every crack and crevice of your machinery, electronics, and cooling fans, eventually causing equipment failure and downtime. Who has the time and resources to redesign an entire facility around a...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for transportation applications

    From alternating between initial paint sprays and repairs with finishing and coating applications, you’re too busy to worry if your shop floor air is OSHA or EPA compliant. You want to protect your employees against sanding dust and spray fumes, but facility-wide HVAC systems can suck the air out of your bottom line. What if you had a cost-effective, clean air solution that could protect your employees from airborne hazards and even speed up drying times for a more efficient work flow?

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for lean manufacturing applications

    Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you